LBitmap::Spherize

#include "ltwrappr.h"

virtual L_INT LBitmap::Spherize(nValue, CenterPt, crFill, uFlags)

L_INT nValue;	/* stretch amount */
POINT CenterPt;	/* sphere center */
COLORREF crFill;	/* fill color */
L_UINT uFlags;	/* flags */

Warps the image around a 3D spherical shape.

Parameter	Description
nValue	Amount of stretching where :
	Positive values: stretch the central pixels toward the edges.
	Negative values: stretch the pixels toward the Center.
	Valid values range is 500 to 500.
CenterPt	POINT structure that contains the center of the sphere.
crFill	The COLORREF value that specifies the fill color for any exposed areas.
uFlags	Flags that indicate how to handle exposed areas outside the sphere and inside the sphere. You can use a bitwise OR (\|) to specify one flag from each group.
	The following are the flags that indicate how to handle exposed areas outside the sphere:
	Value	Meaning
	FILL_CLR	[0x0000] Fill any exposed areas with crFill.
	FILL_RPT	[0x0001] Stretch the image edges to fill the exposed area.
	FILL_NOCHG	[0x0002] Leave the exposed area as is, without changing it.
	The following are the flags that indicate how to handle exposed areas inside the sphere:
	Value	Meaning
	FILL_ROT	[0x0000] Rotate the image inside the sphere pattern.
	FILL_WOUTROT	[0x0010] Fill exposed sphere pattern center as selected from exposed area process type flag.
	This flag is ignored if the nValue is negative.

Returns

SUCCESS	The function was successful.
< 1	An error occurred. Refer to Return Codes.

Comments

This function will warp the image as a 3D spherical shape around the specified CenterPt. The center point must be defined inside the bitmap or inside the region, if the bitmap has a region.

If the bitmap has a region, the effect will be applied on the region only.

This function supports 12 and 16-bit grayscale and 48 and 64-bit color images. Support for 12 and 16-bit grayscale and 48 and 64-bit color images is available only in the Document/Medical toolkits.

This function does not support signed data images. It returns the error code ERROR_SIGNED_DATA_NOT_SUPPORTED if a signed data image is passed to this function.

This function does not support 32-bit grayscale images. It returns the error code ERROR_GRAY32_UNSUPPORTED if a 32-bit grayscale image is passed to this function.

Required DLLs and Libraries

LTIMGSFX

For a listing of the exact DLLs and Libraries needed, based on the toolkit version, refer to Files To Be Included With Your Application.

See Also

Functions:	LBitmap::BricksTexture, LBitmap::Canvas, LBitmap::Clouds, LBitmap::ColoredBalls, LBitmap::DiffuseGlow, LBitmap::DisplaceMap, LBitmap::Fragment, LBitmap::HalfTonePattern, LBitmap::MaskConvolution, LBitmap::MosaicTiles, LBitmap::Offset, LBitmap::Perspective, LBitmap::PlasmaFilter, LBitmap::Pointillist, LBitmap::RomanMosaic, LBitmap::Vignette, LBitmap::ZigZag, LBitmap::AddNoise, LBitmap::Emboss, LBitmap::Mosaic, LBitmap::MotionBlur, LBitmap::Oilify, LBitmap::Posterize, LBitmap::RemoveRedeye, LBitmap::Solarize, LBitmapBase::Underlay, LDialogImageEffect::DoModalSpherize, LBitmap::Bending, LBitmap::Cylindrical, LBitmap::FreeHandShear, LBitmap::Impressionist, LBitmap::FreeHandWave, LBitmap::Pixelate, LBitmap::Polar, LBitmap::Punch, LBitmap::RadWave, LBitmap::Ripple, LBitmap::RadialBlur, LBitmap::Swirl, LBitmap::Wave, LBitmap::Wind, LBitmap::ZoomBlur, LBitmap::ZoomWave
Topics:	Raster Image Functions: Doing Geometric Transformations
	Processing an Image
	Applying Artistic Effects
	Using Color Values in LEADTOOLS

Example

L_INT LBitmap__SpherizeExample(LAnimationWindow * LAniWnd) 
{
   
   POINT   CenterPt; 
   CenterPt.x  =  (LAniWnd->GetHandle ())->Width/2; 
   CenterPt.y  =  (LAniWnd->GetHandle ())->Height/2; 
   
   return LAniWnd->Spherize(100, CenterPt,  0, FILL_RPT | FILL_WOUTROT); 
}