SSLVerifyDepth property (ILEADDicomNet)
long SSLVerifyDepth | |
Overview |
Remarks
(Medical Imaging Suite only) Used to set the maximum depth of the certificate chain to be verified. The default value is 9.
Use the following procedure to change the default security options:
1. |
Set the UseSSLOptions property to VARIANT_TRUE |
2. |
Set the NetworkSecurityMode property to DICOM_SECURE_TLS |
3. |
Set any or all of the following properties. |
SSLVerifyDepth property
4. |
Set the SSLCreateFlags property to have the flags that correspond to the properties that were set in step 3. |
5. |
Call the StartUp method. |
Note that the properties in steps 1, 2, 3, and 4 must be set before calling the StartUp method, and that the NetworkSecurityMode property must be set to DICOM_SECURE_TLS. If the NetworkSecurityMode property is not DICOM_SECURE_TLS, then the SSL properties are ignored.
See Also
Elements: |
StartUp method,UseSSLOptions property, SSLCreateFlags property, SSLMethodType property, SSLVerifyMode property, SSLOptions property, SSLCAFile property, NetworkSecurityMode property |
Topics: |
|
|
|
|