LDialogImageEffect::DoModalSpherize
#include "ltwrappr.h"
virtual L_INT LDialogImageEffect::DoModalSpherize(hWndOwner)
HWND hWndOwner; |
/* handle of the window which owns the dialog */ |
Displays the Spherize dialog box, and gets the options for LBitmap::Spherize. This function is available in the Raster Pro and above toolkits.
Parameter |
Description |
hWndOwner |
Handle of the window which owns the dialog. |
Returns
SUCCESS_DLG_OK |
The "OK" button was pressed, and the dialog exited successfully. |
SUCCESS_DLG_CANCEL |
The "Cancel" button was pressed, and the dialog exited successfully. |
< 1 |
An error occurred. Refer to Return Codes. |
Comments
LDialogImageEffect::SetSpherizeParams must be called before using this function to set the initial values for the dialog. You can get the updated SPHERIZEDLGPARAMS with the values entered by the user through the dialog by using LDialogImageEffect::GetSpherizeParams.
Zoom to fit
Use this button to fit entire preview images on both the Before and After views.
Zoom to Normal
Use this button to view images with normal scale on both the Before and After views.
Before View
This view shows the original image before the dialog applies any changes to it.
The view can be dragged when it is not in Zoom to Fit zoom mode. Place the mouse cursor over the view window (the cursor will change to a hand), then click and drag.
After View
This view shows the original image with the dialog changes applied. This enables the user to see a preview of what the image should look like when the changes are applied.
The view can be dragged when it is not in Zoom to Fit zoom mode. Place the mouse cursor over the view window (the cursor will change to a hand), then click and drag.
Value Edit box and Slider:
Use the Value edit box or slider to set the amount of stretching. Positive values stretch the image toward the edges, and negative values stretch the image toward its center.
Exposed Area Group
Specifies how to fill the exposed area, if found.
Use Color, use the color from color picker button; to select the color that will fill exposed area lift unfilled. Clicking the color picker button will activate a Color Dialog that will be used to set the required color.
Stretch Image, stretches the image edges to fill the exposed area.
Dont Change, leaves the exposed area without changing it.
Rotate Check box:
Check this to rotate the image inside the spherical pattern. It is available only if the Value edit box contains a positive value.
Pivot Section:
This section contains two edit boxes and a display area for setting the pivot point. You can also set the pivot point by right clicking on the Before view. The Pivot point appears on the point you just clicked.
X Edit box:
Use this to set the pivot's x-axis position in the image. Enter the value directly in the edit box or use the arrows to set the desired value.
Y Edit box:
Use this to set the pivot's y-axis position in the image. Enter the value directly in the edit box or use the arrows to set the desired value.
Cursor Pos (x,y)
Displays the mouse position with respect to the image.
Center Button:
Use the Center button to center the Before and After views with respect to the pivot point position.
OK
Use the OK button to close the dialog and apply the changes.
Cancel
Use the Cancel button to close the dialog and discard the changes.
Progress Bar
Located at the bottom of the dialog, this progress bar shows the percentage of the current dialog operation that has been completed.
Required DLLs and Libraries
LTDLGIMGEFX For a listing of the exact DLLs and Libraries needed, based on the toolkit version, refer to Files To Be Included With Your Application |
See Also
Example
L_INT LDialogImageEffect_DoModalSpherizeExample(LBitmap * pBitmap, HWND hWnd) { L_INT nRet; LDialogImageEffect DlgImageEffect; nRet = LDialogImageEffect::Initialize(DLG_INIT_COLOR ); if(nRet != SUCCESS) return nRet; DlgImageEffect.SetBitmap(pBitmap); SPHERIZEDLGPARAMS DlgParams; memset ( &DlgParams, 0, sizeof ( SPHERIZEDLGPARAMS ) ); DlgParams.uStructSize = sizeof ( SPHERIZEDLGPARAMS ); DlgImageEffect.EnableCallBack (FALSE); DlgImageEffect.EnablePreview(TRUE); DlgImageEffect.EnableAutoProcess(TRUE); DlgImageEffect.EnableToolbar(TRUE); nRet = DlgImageEffect.SetSpherizeParams(&DlgParams); if(nRet != SUCCESS) return nRet; nRet = DlgImageEffect.DoModalSpherize(hWnd); if(nRet < 1) return nRet; // Gets the updated values for the structure nRet = DlgImageEffect.GetSpherizeParams(&DlgParams, sizeof(DlgParams)); if(nRet != SUCCESS) return nRet; nRet = LDialogImageEffect::Free(); if(nRet != SUCCESS) return nRet; return SUCCESS; }