L_SaveFileMemory

#include "l_bitmap.h"

L_LTFIL_API L_INT L_SaveFileMemory(hHandle, pBitmap, nFormat, nBitsPerPixel, nQFactor, uFlags, pFunction, lpUserData, uSize, pSaveOptions)

L_HANDLE* hHandle;	/* pointer to a memory handle */
pBITMAPHANDLE pBitmap;	/* pointer to the bitmap handle */
L_INT nFormat;	/* output file format */
L_INT nBitsPerPixel;	/* resulting file's pixel depth */
L_INT nQFactor;	/* quality factor */
L_UINT uFlags;	/* flags that determine function behavior */
FILESAVECALLBACK pFunction;	/* optional callback function */
L_VOID* lpUserData;	/* pointer to more parameters for the callback */
L_SIZE_T* uSize;	/* pointer to the size of the memory handle */
pSAVEFILEOPTION pSaveOptions;	/* pointer to optional extended save options */

Saves a bitmap to a file in memory. The output can be in any of the supported compressed or uncompressed file formats.

Parameter	Description
hHandle	Pointer to the memory handle that will be updated with a new memory handle that contains the saved image. To append a page to an existing image, this pointer should point to a valid memory handle (pHandle!=NULL). If you have no image saved in memory, this pointer should point to NULL (pHandle=NULL).
	If you pass a valid memory handle, the old handle will become invalid and a new handle created. The new handle may have the same value as the old handle, however, this is not guaranteed.
pBitmap	Pointer to the bitmap handle that describes the data to be saved. The bitmap handle can contain the actual data, but does not have to, since your callback function can supply the data.
	However, the bitmap handle must contain values for the following fields: Width, Height, BitsPerPixel, BytesPerLine, nColors, ViewPerspective, Order, and DitheringMethod. (The BytesPerLine value must be a multiple of four.)
nFormat	Output file format. For valid values, refer to Files To Be Included With Your Application.
nBitsPerPixel	Resulting file's pixel depth. Note that not all bits per pixel are available to all file formats. For valid values, refer to Formats of Output Files. If nBitsPerPixel is 0, the file will be stored using the closet BitsPerPixel value supported by that format. For example, if a file format supports 1, 4, and 24 BitsPerPixel, and the pBitmap->BitsPerPixel is 5, the file will be stored as 24 bit. Likewise, if the pBitmap->BitsPerPixel is 2, the file will be stored as 4 bit.
nQFactor	This parameter is used when saving an image file to FILE_CMP, FILE_JPEG, FILE_JPEG_411, FILE_JPEG_422, FILE_TIF_JPEG, FILE_LEAD1JTIF, FILE_LEAD2JTIF, FILE_FPX_JPEG_QFACTOR, and FILE_EXIF_JPEG. Qfactor is a number that determines the degree of loss in the compression process.
	For possible values, refer to Compression Quality Factors
uFlags	Binary flags that determine the behavior of L_SaveFile. You can specify one of the following values:
	Value	Meaning
	SAVEFILE_FIXEDPALETTE	[0x0001] The function uses the fixed palette for images that are saved as 8 bits per pixel or less.
	SAVEFILE_OPTIMIZEDPALETTE	[0x0002] The function uses the individual image's optimized palette for images that are saved as 8 bits per pixel or less. The optimized palette must be included in the bitmap handle.
	SAVEFILE_MULTIPAGE	[0x0004] The function saves the image in a multi-page file. It appends the image as the last one in the file. You can save multi-page images in PCX, GIF, and most TIFF file formats (including JTIF, but excluding EXIF).
pFunction	Optional callback function for additional processing.
	$image\sqrblit.gif$ If you do not provide a callback function, use NULL as the value of this parameter.
	$image\sqrblit.gif$ If you do provide a callback function, use the function pointer as the value of this parameter.
	The callback function must adhere to the syntax described in FILESAVECALLBACK Function.
lpUserData	Void pointer that you can use to pass one or more additional parameters that the callback function needs.
	To use this feature, assign a value to a variable or create a structure that contains as many fields as you need. Then, in this parameter, pass the address of the variable or structure, casting it to L_VOID . The callback function, which receives the address in its own lpUserData* parameter, can cast it to a pointer of the appropriate data type to access your variable or structure.
	If the additional parameters are not needed, you can pass NULL in this parameter.
uSize	Pointer to the size of the memory handle. If you are appending a page to an image in memory, and you specify a valid memory handle in pHandle, uSize should contain the exact size of pHandle. If you have no image in memory, this will initially be ignored. After returning from the function, the memory location pointed to by uSize will be updated with the size of the memory handle.
pSaveOptions	Pointer to optional extended save options. Pass NULL to use the default save options.

Returns

SUCCESS	The function was successful.
< 1	An error occurred. Refer to Return Codes.

Comments

To use this function, do the following:

1.	Declare a memory handle. You can then pass its address in this function, which will allocate the memory, save the bitmap, and unlock the memory. Set the value of the HANDLE to NULL.
2.	Declare a long integer (L_UINT32) variable for the file-size. You can then pass its address in this function, which will update its value with the size of the file.
3.	Call this function to save the bitmap in the specified memory handle.

Support for 12 and 16-bit grayscale images is only available in the Document/Medical Imaging editions .

This function cannot be used in combination with L_RedirectIO.

Note:	More options are available in the SAVEFILEOPTION structure.
Note:	FPX, PCD, AWD and AVI files cannot be saved to memory.

This function supports signed data images, but only DICOM and TIFF formats support signed data. This function will return an error if you attempt to save a signed image to a format other than DICOM or TIFF.

For information on saving bitmaps that have been window leveled, refer to Saving Window-Leveled Bitmaps.

If the bitmap has a region, the region stored in the bitmap will be saved, if the image is saved as one of the TIFF file formats.

Required DLLs and Libraries

LTFIL
File format DLLs

For a listing of the exact DLLs and Libraries needed, based on the toolkit version, refer to Files To Be Included With Your Application.

Platforms

Windows 2000 / XP/Vista, Windows CE.

See Also

Functions:	L_SaveBitmap, L_SaveFileOffset, L_SaveFile, L_FileConvert, L_SetComment, L_DlgSave, L_SaveBitmapMemory, L_SaveFile
Topics:	Raster Image Functions: Saving Files
	Raster Image Functions: Input and Output
	Loading and Saving Images
	Saving a Region

For a list of functions that utilize the LOADFILEOPTION or SAVEFILEOPTION structures, refer to Functions Utilizing the LOADFILEOPTION or SAVEFILEOPTION structures.

Example

 L_INT SaveFileMemoryExample(L_TCHAR     * pFilename,
                                           pBITMAPHANDLE pBitmapHandle,
                                           L_INT         nType,
                                           HWND          hMainWnd)
{
   UNREFERENCED_PARAMETER(nType);

   L_INT nRet;
   HANDLE  hFile=NULL;
   HANDLE hData=NULL;
   L_CHAR  *pData;
   L_CHAR  *pDataMover;
   L_SIZE_T uSize;
   SAVEFILEOPTION SaveFileOption;
   LOADFILEOPTION LoadFileOption;
   DWORD dwSizeWrite;

   L_GetDefaultSaveFileOption(&SaveFileOption, sizeof(SAVEFILEOPTION));
   L_GetDefaultLoadFileOption(&LoadFileOption, sizeof(LOADFILEOPTION));
   SaveFileOption.PageNumber = 1;

   /* save first page */
   nRet = L_SaveFileMemory (&hData, pBitmapHandle, FILE_TIF, 0, 0, 0, NULL, NULL, &uSize, &SaveFileOption);
   if(nRet != SUCCESS)
      return nRet;
    
   /* flip image */
   nRet = L_FlipBitmap(pBitmapHandle);
   if(nRet != SUCCESS)
      return nRet;
   SaveFileOption.PageNumber = 2;

   /* save second page */

   nRet = L_SaveFileMemory (&hData, pBitmapHandle, FILE_TIF, 0, 0, 0, NULL, NULL, &uSize, &SaveFileOption);
   if(nRet != SUCCESS)
      return nRet;
     
   pData = (L_CHAR  *) GlobalLock (hData);
   pDataMover = pData;

   MessageBox (NULL, TEXT("Image Saved To Memory!"), TEXT("SUCCESS"), MB_OK);
   L_FreeBitmap (pBitmapHandle);
   InvalidateRect (hMainWnd, NULL, TRUE);
   UpdateWindow (hMainWnd);
 
   /* Open/Create the file to write. */
   hFile = CreateFile(pFilename, GENERIC_WRITE, 0, NULL, CREATE_ALWAYS, FILE_ATTRIBUTE_NORMAL, 0);

   if (hFile == INVALID_HANDLE_VALUE)
   {
      MessageBox (NULL, TEXT("Error Opening File!"), TEXT("Error"), MB_OK);
      return (FALSE); /* Failure on creation! */
   }

   /* Write the file in a loop, because the file could be larger than a single write can request. */
   while (uSize > 0)
   {
      nRet = WriteFile(hFile, pDataMover,
                      (L_INT) min (uSize, (L_UINT32) 32000), &dwSizeWrite, NULL);

      if (!nRet)
      {
         MessageBox (NULL, TEXT("Error writing file!"), TEXT("Error"), MB_OK);
         nRet = FALSE;          /* Failure on write! */
         break;
      }
      else
      {
         uSize -= dwSizeWrite;
         pDataMover += dwSizeWrite;
      }
   }

   if (nRet)
      MessageBox (NULL, TEXT("Memory File Has Been Written To Disk!"), TEXT("SUCCESS"), MB_OK);

   CloseHandle(hFile);
   GlobalUnlock (hData);
   GlobalFree (hData);

   /* load page 2 from the saved file */
   LoadFileOption.PageNumber = 2;
   if(pBitmapHandle->Flags.Allocated)
      L_FreeBitmap(pBitmapHandle);
   nRet = L_LoadBitmap (pFilename, pBitmapHandle, sizeof(BITMAPHANDLE), 0, ORDER_BGR, &LoadFileOption, NULL);
   if(nRet == SUCCESS)
   {
      InvalidateRect (hMainWnd, NULL, TRUE);
      UpdateWindow (hMainWnd);
   }
   else
   {
      MessageBox (NULL, TEXT("Error Loading from file!"), TEXT("Error"), MB_OK);
      return nRet;
   }

   return SUCCESS;
}