LBitmap::Bending
#include "ltwrappr.h"
virtual L_INT LBitmap::Bending (nValue, CenterPt, crFill, uFlags)
L_INT nValue; |
/* stretch amount */ |
POINT CenterPt; |
/* effect center */ |
COLORREF crFill; |
/* fill color */ |
L_UINT uFlags; |
/* flags */ |
Warps the active bitmap along a curved plane, centered on the pivot point. This function is available in the Raster Pro and above toolkits.
Parameter |
Description |
|
nValue |
Amount of stretching, where positive values stretch the pixels toward edges, and negative values stretch the pixels toward the center. Possible values range from 500 to 500. |
|
CenterPt |
A POINT structure that contains the center of the arc. This is ignored when either BND_HORZ or BND_VERT is set in the uFlags parameter. |
|
crFill |
The COLORREF value that specifies the fill color for any exposed areas. You can specify a COLORREF value, such as the return value of the Windows RGB macro, or you can use the PALETTEINDEX macro to specify a palette color. |
|
uFlags |
Flags that indicate how to handle peripherally exposed areas, how to handle centrally exposed areas and the type of bending. You can use a bitwise OR (|) to specify one flag from each group. |
|
|
The following are the flags that indicate how to handle peripherally exposed areas: |
|
|
Value |
Meaning |
|
FILL_CLR |
[0x0000] Fill any exposed areas with crFill. |
|
FILL_RPT |
[0x0001] Stretch the image edges to fill the exposed area. |
|
FILL_NOCHG |
[0x0002] Leave the exposed area as is, without changing it. |
|
The following are the flags that indicate how to handle an exposed center: |
|
|
Value |
Meaning |
|
FILL_ROT |
[0x0000] Rotate the image inside the arc pattern. |
|
FILL_WOUTROT |
[0x0010] Fill the exposed center as you would any other exposed area. This is determined by setting the FILL_CLR, FILL_RPT or FILL_NOCHG flags. |
|
This flag is ignored if the nValue is negative. |
|
|
The following are the flags that indicate how the bitmap is bent: |
|
|
Value |
Meaning |
|
BND_NORM |
[0x0000] Stretch the image along the vertical and horizontal planes. |
|
BND_HORZ |
[0x0100] Stretch the image along the horizontal plane. |
|
BND_VERT |
[0x0200] Stretch the image along the vertical plane. |
Returns
SUCCESS |
The function was successful. |
< 1 |
An error occurred. Refer to Return Codes. |
Comments
The function bends the image around the specified CenterPt. The center point must be defined inside the bitmap or inside the region, if the bitmap has a region. If the bitmap has a region, the effect will be applied on the region only.
This function supports 12 and 16-bit grayscale and 48 and 64-bit color images. Support for 12 and 16-bit grayscale and 48 and 64-bit color images is available only in the Document/Medical toolkits.
This function does not support signed data images. It returns the error code ERROR_SIGNED_DATA_NOT_SUPPORTED if a signed data image is passed to this function.
This function does not support 32-bit grayscale images. It returns the error code ERROR_GRAY32_UNSUPPORTED if a 32-bit grayscale image is passed to this function.
Required DLLs and Libraries
LTIMGSFX For a listing of the exact DLLs and Libraries needed, based on the toolkit version, refer to Files To Be Included With Your Application. |
See Also
Example
L_INT LBitmap__BendingExample(LAnimationWindow * LAniWnd) { POINT pt; pt.x = 100; pt.y = 100; return LAniWnd->Bending(20, pt, RGB(200,120,30), FILL_CLR); }