LBitmap::DirectionEdgeStatistical

#include "ltwrappr.h"

virtual L_INT LBitmap::DirectionEdgeStatistical (uDim, uThreshold, nAngle, crEdgeColor, crBkColor)

L_UINT uDim;

/* edge detector size */

L_UINT uThreshold;

/* threshold value */

L_INT nAngle;

/* edge search direction */

COLORREF crEdgeColor;

/* edge color value */

COLORREF crBkColor;

/* non-edge color value */

Detects the variation of colors in the specified direction using statistical indices. It is similar to LBitmap::EdgeDetectStatistical, but this function allows you to specify the direction angle.

Parameter

Description

pBitmap

Pointer to the bitmap handle that references the bitmap to which the edge detector is applied.

uDim

The dimension or the number of pixels used to calculate the edge in the specified direction.

uThreshold

Threshold value used to determine which pixels are edge pixels. If the difference in the intensity value between the pixel being tested and the average intensity of the pixels in the uDim around it is greater than this value, the pixel is an edge pixel.  The threshold range for the 16, 48, and 64-bit bitmaps is from 0 to 65535 and for 12-bit bitmaps from 0 to 4095. Otherwise, it is from 0 to 255. The threshold is applied on channels separately.

nAngle

Angular amount that specifies edge detector direction, in hundredths of degrees. Valid values range from 18000 through 18000. . Positive valued angles are produced by counterclockwise rotation above the horizon and negative valued angles are produced by clockwise rotation below the horizon. This value is divided internally by 100.

crEdgeColor

The COLORREF value that specifies the edge color. You can specify a COLORREF value, such as the return value of the Windows RGB macro, or you can use the PALETTEINDEX macro to specify a palette color.

crBkColor

The COLORREF value that specifies the non edge color. You can specify a COLORREF value, such as the return value of the Windows RGB macro, or you can use the PALETTEINDEX macro to specify a palette color.

Returns

SUCCESS

The function was successful.

< 1

An error occurred. Refer to Return Codes.

Comments

The edges are detected by applying a statistical filter that analyzes the variations of colors in a specified direction around each pixel.

To update a status bar or detect a user interrupt during execution of this function, refer to LBase::EnableStatusCallback.

Support for 12 and 16-bit grayscale and 48 and 64-bit color images is available only in the Document/Medical toolkits.

This function does not support 32-bit grayscale images. It returns the error code ERROR_GRAY32_UNSUPPORTED if a 32-bit grayscale image is passed to this function.

Required DLLs and Libraries

LTIMGEFX

For a listing of the exact DLLs and Libraries needed, based on the toolkit version, refer to Files To Be Included With Your Application.

See Also

Functions:

LBitmap::BricksTexture, LBitmap::Deskew, LBitmap::DeskewExt, LBitmap::DiffuseGlow, LBitmap::GlowFilter, LBitmap::HalfTonePattern, LBitmap::HighPassFilter, LBitmap::MaskConvolution, LBitmap::Perspective, LBitmap::PlasmaFilter, LBitmap::Pointillist, LBitmapBase::Combine, LBitmap::IntensityDetect, LBitmap::Sharpen, LBitmap::SpatialFilter, LBitmap::EdgeDetector, LBitmap::AddShadow, LBitmap::AllocFTArray, LBitmap::ChangeHueSatInt, LBitmap::ColorReplace, LBitmap::ColorThreshold, LBitmap::DFT, LBitmap::FFT, LBitmap::FreeFTArray, LBitmap::FrqFilter, LBitmap::FrqFilterMask, LBitmap::FTDisplay, LBitmap::GetStatisticsInfo, LBitmap::GetFeretsDiameter, LBitmap::GetObjectInfo, LBitmap::GetRgnContourPoints, LBitmap::GetRgnPerimeterLength, LBitmap::MathFunction, LBitmap::RevEffect, LBitmap::Segment, LBitmap::SubtractBackground, LBitmap::UserFilter, LBitmap::DeskewCheck

Topics:

Detecting and Enhancing Edges and Lines

 

Raster Image Functions: Filtering Images

 

Using Color Values in LEADTOOLS

 

Raster Image Functions: Detecting and Enhancing Edges and Lines

Example

L_INT LBitmap__DirectionEdgeStatisticalExample(LBitmap *pLeadBitmap) 
{
   
   /* Find the edges in the bitmap*/
   return pLeadBitmap->DirectionEdgeStatistical (15, 128, 4500, RGB(255, 255, 255), RGB(0, 0, 0)); 
}