ILMAPhaser Interface
typedef
struct
{
long lDryMix;
long lWetMix;
long lDelay;
long lFeedback;
long lStereo;
long lDepth;
long lRate;
BOOL bEnabled;
long lDDryMix;
long lDWetMix;
long lDDelay;
long lDFeedback;
long lDStereo;
long lDDepth;
long lDRate;
BOOL bDEnabled;
} PHASER_ATTRIBUTES;
Describes phaser attributes.
Member |
Description |
|
lDryMix |
Controls the level of unprocessed signals. Adjust to control the pass-through volume of the unprocessed signal. |
|
lWetMix |
Controls the level of processed signals. Adjust to control the pass-through volume of the processed signal. |
|
lDelay |
Controls the level of Phasing effect. Larger values result in greater delay times. |
|
lFeedback |
Feedback of the repeated signal, by default from -100 to 100. Zero feedback will result in only a single repeat, while nonzero feedback settings will generate numerous repeats. |
|
lStereo |
Stereo represents the phase difference between the left and right channel. |
|
lDepth |
The depth parameter controls the amount of the filter output that is added to the sound |
|
lRate |
This parameter controls how quickly the notches sweep up and down over the frequency range. |
|
bEnabled |
Indicates weather Phase effect is enabled (TRUE) or not (FALSE). |
|
lDDryMix |
Default Dry Mix value. Original default value is 70. |
|
lDWetMix |
Default Wet Mix value. Original default value is 50. |
|
lDDelay |
Default delay value. Original default value is 100. |
|
lDFeedback |
Default feedback value Original default value is 25. |
|
lDStereo |
Default stereo value Original default value is 90. |
|
lDDepth |
Default Depth value Original default value is 50. |
|
lDRate |
Default Rate value Original default value is 100. |
|
bDEnabled |
Default for bEnabled value Original default value is TRUE. |
Parameters
|
pnChannels |
valid pointer to an integer variable to be updated with the number of channels. |
Description
Gets the number of channels per sample of the current connected media format.
Returns
S_OK if successful, S_FALSE otherwise.
Parameters
|
PhaserAttributes |
a PHASER_ATTRIBUTES structure that contains the effects to set. |
Description
Sets the properties for the phase effect.
S_OK if successful, S_FALSE otherwise.
Parameters
|
pPhaserAttributes |
valid pointer to a PHASER_ATTRIBUTES structure to be updated with the current phase attributes. |
Description
Retrieves the current phase attributes.
Returns
S_OK if successful, S_FALSE otherwise.