LBitmap::ColorHalfTone

#include "ltwrappr.h"

L_INT LBitmap::ColorHalfTone(uMaxRad, nCyanAngle, nMagentaAngle, nYellowAngle, nBlackAngle, uFlags = 0)

L_UINT uMaxRad;

/* maximum dot size */

L_INT nCyanAngle;

/* cyan screen angle */

L_INT nMagentaAngle;

/* magenta screen angle */

L_INT nYellowAngle;

/* yellow screen angle */

L_INT nBlackAngle;

/* black screen angle */

L_UINT32 uFlags;

/* flags */

Creates an enlarged halftone screen for each image channel.

Parameter

Description

uMaxRad

Maximum dot (i.e. circle) size, in pixels. This value should not be less than 5.

nCyanAngle

Cyan screen angle in hundredths of degrees (+/-). A positive value will rotate the screen clockwise, while a negative value will rotate the screen counter-clockwise. Valid values are from 36000 to + 36000.

nMagentaAngle

Magenta screen angle in hundredths of degrees (+/-). A positive value will rotate the screen clockwise, while a negative value will rotate the screen counter-clockwise. Valid values are from 36000 to + 36000.

nYellowAngle

Yellow screen angle in hundredths of degrees (+/-). A positive value will rotate the screen clockwise, while a negative value will rotate the screen counter-clockwise. Valid values are from 36000 to + 36000.

nBlackAngle

Black screen angle in hundredths of degrees (+/-). A positive value will rotate the screen clockwise, while a negative value will rotate the screen counter-clockwise. Valid values are from 36000 to + 36000.

uFlags

Reserved for future use. Must be 0.

Returns

SUCCESS

The function was successful.

< 1

An error occurred. Refer to Return Codes.

Comments

The filter divides the image into rectangles and replaces each rectangle with circles. Each channel has a separate grid of circles, and has its own angle setting. The size of each circle is proportional to the brightness of the rectangle that it is replacing.

This filter is named after the colored print process of color halftoning, where individual separations are made for each color: Cyan, Magenta, Yellow, and Black. The four separations are combined to make the final print. To prevent moir patterns, each separation uses a different screen angle when they are combined. In the true print process the circles are not large enough to be seen without magnification.

For an example, click here

To update a status bar or detect a user interrupt during execution of this function, refer to LBase::EnableStatusCallback.

This function supports 12 and 16-bit grayscale and 48 and 64-bit color images. Support for 12 and 16-bit grayscale and 48 and 64-bit color images is available only in the Document/Medical toolkits.

If the bitmap has a region, this function works only on the region. If the bitmap does not have a region, this function works on the entire bitmap.

This function does not support signed data images. It returns the error code ERROR_SIGNED_DATA_NOT_SUPPORTED if a signed data image is passed to this function.

This function does not support 32-bit grayscale images. It returns the error code ERROR_GRAY32_UNSUPPORTED if a 32-bit grayscale image is passed to this function.

Required DLLs and Libraries

LTIMGEFX

For a listing of the exact DLLs and Libraries needed, based on the toolkit version, refer to Files To Be Included With Your Application.

See Also

Functions:

LBitmapSettings::DefaultDithering, LBitmapBase::GrayScale, LBitmap::GrayScaleExt, LBitmap::AutoColorLevel, LBitmap::ColorLevel, LBitmap::Correlation, LBitmap::GrayScaleToDuotone, LBitmap::GrayScaleToMultitone, LBitmap::SelectiveColor, LBitmap::Skeleton, LBitmap::HalfTone, LBitmap::ColorSeparate; LBitmap::ColorMerge; LBitmap::Desaturate; LBitmap::HalfTonePattern; LBitmap::ConvertToColoredGray; LBitmap::ColorizeGray; LBitmap::ShiftData; LBitmap::SelectData, LBitmap::GetMinMaxBits; LBitmap::GetMinMaxVal; LBitmap::GetHistogram; LBitmapBase::IsGrayScale; LBitmap::WindowLevel; LBitmap::WindowLevelFillLUT, LBitmap::Skeleton2

Topics:

Raster Image Functions: Doing Color Expansion or Reduction

 

Correcting Colors

Color Halftones and Halftone Images

 

Raster Image Functions: Functions Where the Region Preempts the Bitmap

 

Raster Image Functions: Working with Color Halftones, Halftones, and Grayscale Images

 

Raster Image Functions: Correcting Colors

Example

L_INT LBitmap__ColorHalfToneExample()
{
   L_INT nRet;
   LBitmap LeadBitmap;
   nRet =LeadBitmap.Load(TEXT("%UserProfile%\\My Documents\\LEADTOOLS Images\\IMAGE4.CMP"), 0,ORDER_BGR);
   if(nRet !=SUCCESS)
      return nRet;
   nRet =LeadBitmap.ColorHalfTone(15, 10800, 16200, 9000,4500);
   if(nRet !=SUCCESS)
      return nRet;
   return SUCCESS;
}