|
|
Available as an Add-on for LEADTOOLS Document and Medical Imaging toolkits. |
FILLMETHOD
typedef enum
{
FILL_DEFAULT = 0,
FILL_OMNIFONT,
FILL_DRAFTDOT9,
FILL_OMR,
FILL_HANDPRINT,
FILL_DRAFTDOT24,
FILL_OCRA,
FILL_OCRB,
FILL_MICR,
FILL_DOTDIGIT,
FILL_DASHDIGIT,
FILL_NO_OCR,
} FILLMETHOD;
The FILLMETHOD enumerated type represents the possible filling methods for a zone.
|
Value |
Meaning |
|
FILL_DEFAULT |
The filling method for a zone is undetermined. |
|
FILL_OMNIFONT |
The omnifont zone filling method. It denotes a machine printed text with any typeface which is not too stylized. |
|
FILL_DRAFTDOT9 |
The 9-pin draft dot-matrix zone filling method. It denotes a 9-pin draft dot-matrix printout. |
|
FILL_OMR |
The optical mark zone filling method. It specifies a search for the presence or absence of an OMR mark within the zone. |
|
FILL_HANDPRINT |
The handprinted zone filling method. It denotes handprinting within the zone. |
|
FILL_DRAFTDOT24 |
The 24-pin draft dot-matrix zone filling method. It denotes a 24-pin draft dot-matrix printout. |
|
FILL_OCRA |
The OCR-A zone filling method. |
|
FILL_OCRB |
The OCR-B zone filling method. |
|
FILL_MICR |
The magnetic ink character filling method (also called E-13B). |
|
FILL_DOTDIGIT |
The dot-digit zone filling method. |
|
FILL_DASHDIGIT |
The dash-digit zone filling method. |
|
FILL_NO_OCR |
No recognition will be attempted. |
Comments
This enumerated type is used by the following structure:
