LVectorRaster::LockObject

virtual L_INT LVectorRaster::LockObject(pRaster)

Gets the object information of the class object.

Returns

Comments

This function is used to retrieve the object information of the class object.

To use this method, declare a variable of the VECTORRASTER type and pass the address to this function. After modifying the vector object settings, call LVectorRaster::UnlockObject (). LVectorRaster::LockObject() and LVectorRaster::UnlockObject () should always be called in pairs.

Before an object has been added to the LVectorBase object, using LVectorBase::AddObject or LVectorLayer::AddObject, LVectorRaster::UnlockObject () can be used to change ALL properties of an object. However, once the object has been added to the LVectorBase object, some properties cannot be changed using LVectorRaster::UnlockObject ().

To change the object information for a class object, call LVectorRaster::UnlockObject.

LVectorRaster::LockObject and LVectorRaster::UnlockObject must be called in pairs.

Note that rotating an object may change the object type. However, not all object types are changed by rotation, and not all rotations result in changing an object type. For example, a rectangle rotated 90 degrees about the z-axis is still a rectangle. A rectangle rotated 45 degrees about the z-axis becomes a polydraw object. The table below indicates object types that may change following rotation and the possible resulting object types.

If an object type changes, LVectorRaster::LockObject and LVectorRaster::UnlockObject will return WRPERR_VECTOR_INVALID_OBJECT_TYPE. Object properties can still be inspected and changed by using LVectorObject::GetObjectAttributes and LVectorObject::SetObjectAttributes.

Required DLLs and Libraries

See Also

Example

This example will add a Raster object to the Active Layer LVectorBase object

Once added, the object will be shifted

L_INT LVectorRaster__LockObjectExample(HWND hWnd, LVectorBase *pVector)
{
   UNREFERENCED_PARAMETER(hWnd);
   L_INT             nRet;
   VECTORRASTER      Raster;
   pBITMAPHANDLE     pMyBitmap;
   LBitmapBase       BitmapBase;
   Raster.Point[0].x = 20;
   Raster.Point[0].y = 20;
   Raster.Point[0].z = 0;
   Raster.Point[1].x = 80;
   Raster.Point[1].y = 80;
   Raster.Point[1].z = 0;
   Raster.Bitmap.nSize = sizeof(VECTORBITMAP);
   //L_LOADBITMAP("gabe.bmp", Raster.Bitmap.Bitmap, ORDER_BGR,NULL, NULL);
   nRet = BitmapBase.Load(TEXT("C:\\Program Files\\LEAD Technologies, Inc\\LEADTOOLS 16\\Images\\gabe.bmp"));
   if(nRet != SUCCESS)
      return nRet;
   pMyBitmap = BitmapBase.GetHandle();
   if (pMyBitmap)
   {
      Raster.Bitmap.Bitmap = *pMyBitmap;
      LVectorRaster VectorRaster(&Raster);
      // add to current active layer
      LVectorLayer VectorLayer;
      nRet = pVector->GetActiveLayer(&VectorLayer);
      if (nRet == SUCCESS)
      {
         nRet = VectorLayer.AddObject(&VectorRaster);
         if(nRet != SUCCESS)
            return nRet;
         MessageBox(NULL, TEXT("Shifting..."), TEXT(""), MB_OK);
         VECTORRASTER RasterTemp;
         nRet = VectorRaster.LockObject(&RasterTemp);
         if(nRet != SUCCESS)
            return nRet;
         Raster.Point[0].x = 40;
         nRet = VectorRaster.UnlockObject(&RasterTemp);
         if(nRet != SUCCESS)
            return nRet;
      }
      else
      {
         MessageBox(NULL, TEXT("No Active Layer--Load a vector and run again"), TEXT(""), MB_OK);
         return nRet;
      }
   }
   //LVectorRaster destructor called when VectorRaster goes out of scope
   return SUCCESS;
}