- filterType
- A PreferredFilter enumeration value specifying the desired filter type
- val
- String with the following possible values:
- Display Name of the filter
- Friendly Name of the filter
- PreferredFilters.LEADDefault (this will use the default LEAD filter)
- PreferredFilters.DontCare (this is the same as setting the value to NULL)
- NULL (don't use any preferred filter - revert to the default DirectShow filter)
Syntax
| Visual Basic (Declaration) | |
|---|---|
Public Overridable Sub SetPreferredFilter( _ ByVal filterType As PreferredFilter, _ ByVal val As String _ ) | |
| Visual Basic (Usage) |  Copy Code |
|---|---|
Dim instance As ConvertCtrl Dim filterType As PreferredFilter Dim val As String instance.SetPreferredFilter(filterType, val) | |
| C# | |
|---|---|
public virtual void SetPreferredFilter( PreferredFilter filterType, string val ) | |
| C++/CLI | |
|---|---|
public: virtual void SetPreferredFilter( PreferredFilter filterType, String^ val ) | |
Parameters
- filterType
- A PreferredFilter enumeration value specifying the desired filter type
- val
- String with the following possible values:
- Display Name of the filter
- Friendly Name of the filter
- PreferredFilters.LEADDefault (this will use the default LEAD filter)
- PreferredFilters.DontCare (this is the same as setting the value to NULL)
- NULL (don't use any preferred filter - revert to the default DirectShow filter)
Example
| Visual Basic | Copy Code |
|---|---|
Public _result As Boolean = False Public _form As ConvertCtrlForm = New ConvertCtrlForm() Public Sub ConverterPreferredFiltersExample() Try ' reference the forms capture control Dim convertCtrl As ConvertCtrl = _form.ConvertCtrl ' set the preferred ISO Demultiplexer to the LEAD default (which is the LEAD ISO Demultiplexer) convertCtrl.SetPreferredFilter(PreferredFilter.ISODemultiplexer, Leadtools.Multimedia.Constants.PreferredFilters.LEADDefault) ' the default ISO Demultiplexer should be the LEAD ISO Demultiplexer now ' the filter names are not case sensitive, so do ignore the case in the compare _result = (String.Compare(convertCtrl.GetPreferredFilter(PreferredFilter.ISODemultiplexer), Leadtools.Multimedia.Constants.PreferredFilters.ISODemultiplexer, True) = 0) Catch e1 As Exception _result = False End Try End Sub | |
| C# | Copy Code |
|---|---|
public bool _result = false; public ConvertCtrlForm _form = new ConvertCtrlForm(); public void ConverterPreferredFiltersExample() { ConvertCtrl convertCtrl = _form.ConvertCtrl; try { // set the preferred ISO Demultiplexer to the LEAD default (which is the LEAD ISO Demultiplexer) convertCtrl.SetPreferredFilter(PreferredFilter.ISODemultiplexer, Constants.PreferredFilters.LEADDefault); // the default ISO Demultiplexer should be the LEAD ISO Demultiplexer now // the filter names are not case sensitive, so do ignore the case in the compare _result = (string.Compare(convertCtrl.GetPreferredFilter(PreferredFilter.ISODemultiplexer), Constants.PreferredFilters.ISODemultiplexer, true) == 0); } catch (Exception) { _result = false; } } | |
Remarks
By default, the toolkit uses filters according to the default DirectShow mechanism, which assigns a merit to each filter. The filters with the highest merits are tried first. If they fail, the filters with a lower merit are tried next until a combination of filters is found that can handle the graph. However, sometimes 3rd party filters get installed on some computers with a high merit and are used instead of the filters you shipped with your application. And unexpected problems can occur if these filters are not working properly. The SetPreferredFilter method allows you to control which filters are used in your application. You can decide to use a certain decoder, demultiplexer or you can choose to use only the LEAD filters.
DirectShow filters have a friendly name and a display name. The friendly name is easy to remember and is usually displayed by GraphEdit or other filter enumeration utilities. But there can be more than one filter with the same friendly name, so it is safer to use the display name, since no two filters have the same display name.
val is a string for the Display Name or Friendly Name of the filter. If Friendly Name is used, this function will choose the first filter it finds with the specified friendly name.
Display names for software filters have the following format: @device:sw:GUID\GUID
For example Microsoft’s MPEG-2 Splitter has:
friendly name: MPEG-2 Splitter
display name: @device:sw:{083863F1-70DE-11D0-BD40-00A0C911CE86}\{3AE86B20-7BE8-11D1-ABE6-00A0C905F375}
The display name for a particular filter can be obtained from the "DirectShow Filter List Utility" (ltmmListFilters.exe) shipped with the toolkit. See Examples Programs and Demos for Win32/x64 in the Multimedia API help file for more details.
If the filterType parameter is equal to PreferredFilter.Generic, then the filterName parameter's possible values are: PreferredFilters.LEADDefault or PreferredFilters.DontCare. If PreferredFilters.LEADDefault is specified, then default decoders and demultiplexers will be set for all values listed in PreferredFilter. If PreferredFilters.DontCare is specified, then the internal list of the preferred filters will be cleared and the DirectShow filter merit determines which filters will be used.
It is recommended that you use the constants from Constants.PreferredFilters whenever possible.
Requirements
Target Platforms: Microsoft .NET Framework 2.0, Windows 2000, Windows XP, Windows Server 2003 family, Windows Server 2008 family, Windows Vista, Windows 7