LEADTOOLS Image Processing (Leadtools.ImageProcessing.SpecialEffects assembly) Send comments on this topic. | Back to Introduction - All Topics | Help Version 17.0.3.29
DrawStarCommand Constructor(LeadPoint,Int32,Int32,Int32,Int32,Int32,Int32,Int32,Int32,Int32,Int32,RasterColor,RasterColor,Int32,DrawStarCommandFlags)
See Also  Example
Leadtools.ImageProcessing.SpecialEffects Namespace > DrawStarCommand Class > DrawStarCommand Constructor : DrawStarCommand Constructor(LeadPoint,Int32,Int32,Int32,Int32,Int32,Int32,Int32,Int32,Int32,Int32,RasterColor,RasterColor,Int32,DrawStarCommandFlags)



centerPoint
Point structure that contains the star center.
spoke
Number of spokes or rays directed inside or outside the star. This parameter only accepts positive values.
starWidth
Star width. This parameter only accepts positive values.
starHeight
Star height. This parameter only accepts positive values.
holeSize
The hole size. This value is given as a percent of the whole star from which the rays start or in which they end. The valid range is from 0 to 100.
phase
Angle to shift the star's rays. This value is given in hundredths of a degree (+/-). This can be a number from 0 to 36,000. A positive value will rotate the rays clockwise, while a negative value will rotate the rays counter-clockwise.
angle
Angle to rotate the star. This value is given in hundredths of a degree (+/-). This can be a number from 0 to 36,000. A positive value will rotate the star clockwise, while a negative value will rotate the star counter-clockwise.
distanceOpacity
Percent of feathering in towards or outward from the spoke center. The valid range is from -100 to 100.
spokeDivision
The percent by which to increment or decrement the size of the low part spoke. The valid range is from -100 to 100.
angleOpacity
Percent of feathering in towards or outward from the spoke border. The valid range is from -100 to 100.
borderOpacity
Transparency, in percent, of the spoke border. The valid range is from -100 to 100.
lowerColorFill
Lower spoke side color.
upperColorFill
Upper spoke side color.
opacity
Transparency, in percent, between the star and the affected image. The valid range is from 0 to 100.
flags
Flags that indicate the direction of the rays.
Initializes a new DrawStarCommand class object with explicit parameters.

Syntax

Visual Basic (Declaration) 
Public Function New( _
   ByVal centerPoint As LeadPoint, _
   ByVal spoke As Integer, _
   ByVal starWidth As Integer, _
   ByVal starHeight As Integer, _
   ByVal holeSize As Integer, _
   ByVal phase As Integer, _
   ByVal angle As Integer, _
   ByVal distanceOpacity As Integer, _
   ByVal spokeDivision As Integer, _
   ByVal angleOpacity As Integer, _
   ByVal borderOpacity As Integer, _
   ByVal lowerColorFill As RasterColor, _
   ByVal upperColorFill As RasterColor, _
   ByVal opacity As Integer, _
   ByVal flags As DrawStarCommandFlags _
)
Visual Basic (Usage)Copy Code
Dim centerPoint As LeadPoint
Dim spoke As Integer
Dim starWidth As Integer
Dim starHeight As Integer
Dim holeSize As Integer
Dim phase As Integer
Dim angle As Integer
Dim distanceOpacity As Integer
Dim spokeDivision As Integer
Dim angleOpacity As Integer
Dim borderOpacity As Integer
Dim lowerColorFill As RasterColor
Dim upperColorFill As RasterColor
Dim opacity As Integer
Dim flags As DrawStarCommandFlags
 
Dim instance As New DrawStarCommand(centerPoint, spoke, starWidth, starHeight, holeSize, phase, angle, distanceOpacity, spokeDivision, angleOpacity, borderOpacity, lowerColorFill, upperColorFill, opacity, flags)
C# 
public DrawStarCommand( 
   LeadPoint centerPoint,
   int spoke,
   int starWidth,
   int starHeight,
   int holeSize,
   int phase,
   int angle,
   int distanceOpacity,
   int spokeDivision,
   int angleOpacity,
   int borderOpacity,
   RasterColor lowerColorFill,
   RasterColor upperColorFill,
   int opacity,
   DrawStarCommandFlags flags
)
C++/CLI 
public:
DrawStarCommand( 
   LeadPoint centerPoint,
   int spoke,
   int starWidth,
   int starHeight,
   int holeSize,
   int phase,
   int angle,
   int distanceOpacity,
   int spokeDivision,
   int angleOpacity,
   int borderOpacity,
   RasterColor lowerColorFill,
   RasterColor upperColorFill,
   int opacity,
   DrawStarCommandFlags flags
)

Parameters

centerPoint
Point structure that contains the star center.
spoke
Number of spokes or rays directed inside or outside the star. This parameter only accepts positive values.
starWidth
Star width. This parameter only accepts positive values.
starHeight
Star height. This parameter only accepts positive values.
holeSize
The hole size. This value is given as a percent of the whole star from which the rays start or in which they end. The valid range is from 0 to 100.
phase
Angle to shift the star's rays. This value is given in hundredths of a degree (+/-). This can be a number from 0 to 36,000. A positive value will rotate the rays clockwise, while a negative value will rotate the rays counter-clockwise.
angle
Angle to rotate the star. This value is given in hundredths of a degree (+/-). This can be a number from 0 to 36,000. A positive value will rotate the star clockwise, while a negative value will rotate the star counter-clockwise.
distanceOpacity
Percent of feathering in towards or outward from the spoke center. The valid range is from -100 to 100.
spokeDivision
The percent by which to increment or decrement the size of the low part spoke. The valid range is from -100 to 100.
angleOpacity
Percent of feathering in towards or outward from the spoke border. The valid range is from -100 to 100.
borderOpacity
Transparency, in percent, of the spoke border. The valid range is from -100 to 100.
lowerColorFill
Lower spoke side color.
upperColorFill
Upper spoke side color.
opacity
Transparency, in percent, between the star and the affected image. The valid range is from 0 to 100.
flags
Flags that indicate the direction of the rays.

Example

Run the Leadtools.ImageProcessing.SpecialEffects.DrawStarCommand on an image.

Visual BasicCopy Code
Public Sub DrawStarConstructorExample()
   Dim codecs As New RasterCodecs()
   codecs.ThrowExceptionsOnInvalidImages = True

   Dim leadImage As RasterImage = codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "Master.jpg"))

   ' Prepare the command
   Dim command As DrawStarCommand
   command = New DrawStarCommand(New LeadPoint(CType((leadImage.Width / 2), Integer), CType((leadImage.Height / 2), Integer)), 5, CType((leadImage.Width / 2), Integer), CType((leadImage.Height / 2), Integer), 50, 0, 0, 0, -50, -50, 50, New RasterColor(255, 0, 0), New RasterColor(0, 0, 255), 100, DrawStarCommandFlags.Inside)
   command.Run(leadImage)
   codecs.Save(leadImage, Path.Combine(LEAD_VARS.ImagesDir, "Result.jpg"), RasterImageFormat.Jpeg, 24)

End Sub

Public NotInheritable Class LEAD_VARS
   Public Const ImagesDir As String = "C:\Users\Public\Documents\LEADTOOLS Images"
End Class
C#Copy Code
public void DrawStarConstructorExample()
   {
      // Load an image
      RasterCodecs codecs = new RasterCodecs();
      codecs.ThrowExceptionsOnInvalidImages = true;

      RasterImage image = codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "Master.jpg"));

      // Prepare the command
      DrawStarCommand command = new DrawStarCommand( new LeadPoint(image.Width/2, image.Height/2), 5, image.Width/2, image.Height/2, 50, 0, 0, 0, -50, -50, 50, new RasterColor(255, 0, 0), new RasterColor(0, 0, 255), 100, DrawStarCommandFlags.Inside);
      command.Run(image);
      codecs.Save(image, Path.Combine(LEAD_VARS.ImagesDir, "Result.jpg"), RasterImageFormat.Jpeg, 24);

   }

static class LEAD_VARS
{
   public const string ImagesDir = @"C:\Users\Public\Documents\LEADTOOLS Images";
}

Requirements

Target Platforms: Microsoft .NET Framework 2.0, Windows 2000, Windows XP, Windows Server 2003 family, Windows Server 2008 family, Windows Vista, Windows 7

See Also