LDicomNet::Listen

#include "ltdic.h"

L_INT LDicomNet::Listen(pszHostAddress, nHostPort, nNbPeers)

L_INT LDicomNet::Listen(pszHostAddress, nHostPort, nNbPeers, nIpType)

L_TCHAR * pszHostAddress;	/* host IP address */
L_UINT nHostPort;	/* host port number */
L_INT nNbPeers;	/* maximum number of peers */
L_INT nIpType;	/* type of IP address */

Establishes a connection to listen for incoming connection requests. This function is available in the PACS Imaging Toolkit.

Parameter	Description
pszHostAddress	Character string that contains the IP address of the host computer (the SCP's address).
nHostPort	Port number of the host (the SCP's port).
nNbPeers	The maximum number of (SCUs) that may be connected to the SCP.
nIpType	The type of IP address. Possible values are:
	Value	Meaning
	DICOM_IPTYPE_NONE	[0x000] Provided for initialization.
	DICOM_IPTYPE_IPV4	[0x001] Only use IPv4 addresses.
	DICOM_IPTYPE_IPV6	[0x002] Only use IPv6 addresses.
	DICOM_IPTYPE_IPV4_OR_IPV6	[0x003] Use both IPv4 and IPv6 addresses.

Returns

0	SUCCESS
>0	An error occurred. Refer to Return Codes.

Comments

If pszHostAddress is "" or NULL, the IP address will be the local computer's address.

If pszHostAddress is "*", the IP address will be all of the local computer's addresses. This is useful if the local computer has more than one network interface and address.

If nHostPort is 0, the port number will be the number of the first available port.

To connect to a server as a client, you must first create and initialize a DICOM Network object using LDicomNet::LDicomNet . Then call LDicomNet::Connect to establish the connection.

To use your computer as an SCP, you must first create a DICOM Network object using LDicomNet::LDicomNet. Then call LDicomNet::Listen to listen for incoming connection requests.

The LDicomNet::Listen(pszHostAddress, nHostPort, nNbPeers, nIpType) overload allows you to specify which type of Internet Protocol Version to use. Pass DICOM_IPTYPE_IPV4 for nIpType to support the Internet Protocol version 4 (IPv4), which is the standard "dotted quad" 32-bit address format that has been in use since 1981. An example of an IPv4 address is 192.168.0.195

Pass DICOM_IPTYPE_IPV6 for nIpType to support Internet Protocol Version 6 (IPv6). IPv6 uses a 128-bit address format. An example of an IPv6 address is fe80::18bd:81f:6b02:759f

To support both IPv4 and Ipv6 addresses, pass DICOM_IPTYPE_IPV6 for nIpType.

If the call to LDicomNet::Listen() fails, make sure that the IP address that you passed for pszHostAddress is a valid address that is accessible within your network. Verify the accessibility of both IPv4 and IPv6 addresses using the windows ping command. For example, to verify that 192.168.0.195 is accessible within your network, perform the following steps:

Launch a command prompt, and type the following command
ping 192.168.0.195

Note that the following are equivalent:

pDicomNet->Listen(pszHostAddr4ess, nHostPort, nNbPeers);
pDicomNet->Listen(pszHostAddr4ess, nHostPort, nNbPeers, DICOM_IPTYPE_IPV4);

Required DLLs and Libraries

LTDIC

For a listing of the exact DLLs and Libraries needed, based on the toolkit version, refer to Files To Be Included With Your Application

Platforms

Win32, x64

See Also

Functions:	LDicomNet::LDicomNet, LDicomNet::StartUp
Topics:	Working with DICOM Network Connections

Example

#define MAKE_IMAGE_PATH(pFileName) TEXT("C:\\Users\\Public\\Documents\\LEADTOOLS Images\\")pFileName
L_INT LDicomNet_ListenExample(LMyDicomNet *m_pDicomNet)
{
   L_INT nRet;
   //LMyDicomNet is a class derived from LDicomNet
   //m_pDicomNet is a member variable declared as:
   //set the temporary file path
   m_pDicomNet = new LMyDicomNet(MAKE_IMAGE_PATH(TEXT("temp")), DICOM_SECURE_NONE);
   L_TCHAR *strHostIP = TEXT("");
   L_INT iPeerPort = 104;
   //startup the network
   nRet = m_pDicomNet->StartUp();
   //create a server to accept up to 25 clients
   nRet = m_pDicomNet->Listen(strHostIP, iPeerPort, 25);
   if(nRet != DICOM_SUCCESS)
      return nRet;
   return DICOM_SUCCESS;
}