Available in LEADTOOLS Imaging Pro, Vector, Document, and Medical Imaging toolkits. |
LBitmap::ColoredBalls
#include "ltwrappr.h"
L_INT LBitmap::ColoredBalls(uNumBalls, uSize, uSizeVariation, nHighLightAng, crHighLight, crBkgColor, crShadingColor, pBallColors, uNumOfBallColors, uAvrBallClrOpacity, uBallClrOpacityVariation, uRipple, uFlags)
L_UINT uNumBalls; |
/* number of balls */ |
L_UINT uSize; |
/* average ball size */ |
L_UINT uSizeVariation; |
/* ball size variation */ |
L_INT nHighLightAng; |
/* light source direction of the highlight on the ball */ |
COLORREF crHighLight; |
/* highlight color on the ball */ |
COLORREF crBkgColor; |
/* background color */ |
COLORREF crShadingColor; |
/* gradient color of the background */ |
COLORREF * pBallColors; |
/* pointer to an array of ball colors */ |
L_UINT uNumOfBallColors; |
/* size of the ball color array */ |
L_UINT uAvrBallClrOpacity; |
/* ball color opacity */ |
L_UINT uBallClrOpacityVariation; |
/* ball color opacity variation */ |
L_UINT uRipple; |
/* gradient frequency */ |
L_UINT uFlags; |
/* flags */ |
Adds colored balls to the bitmap. Various parameters control the color and appearance of the balls.
Parameter |
Description |
|
uNumBalls |
Number of balls that will be drawn in the image. |
|
uSize |
Average ball size, in pixels. |
|
uSizeVariation |
Ball size variation. Valid values range from 0 to 100. Use 0 to have all balls the same size. Use 100 to have the size vary from 0 to 2 X uSize. |
|
nHighLightAng |
Light source direction of the highlight color on the ball. This value is in hundredths of degrees (+/-). A positive value will rotate the highlight color clockwise, while a negative value will rotate the highlight color counter-clockwise. Possible values range from 36000 to + 36000. |
|
crHighLight |
Highlight color. |
|
crBkgColor |
Background color. |
|
crShadingColor |
Shade (or gradient) color. |
|
pBallColors |
Pointer to an array of ball colors. |
|
uNumOfBallColors |
The number of ball colors. |
|
uAvrBallClrOpacity |
Average ball color opacity. Valid values range from 0 to 255 for 8-bit, 0 to 4095 for 12-bit and 0 to 65535 for 16-bit. |
|
uBallClrOpacityVariation |
Ball color opacity variation. Valid values range from 0 to 100. Use 0 to have all pixels assigned the same opacity. Use 100 to have the opacity vary from 0 to 2 X uAvrBallClrOpacity. |
|
uRipple |
The number of shades that are used to produce the background. This value is divided internally by 100. For example, if uRipple = 200 the actual frequency is 2. This value is ignored if the CLRBALLS_SHADING_SINGLE flag is set. |
|
uFlags |
Flags that indicate which background color, shade (or gradient) type, ball type and ball color type to use. You can use a bit wise OR (|) to specify one flag from each group. The following flags indicate how to draw the shading: |
|
|
Value |
Meaning |
|
CLRBALLS_SHADING_SINGLE |
[0x0001] Use only the background color (i.e. no shading). |
|
CLRBALLS_SHADING_LEFTRIGHT |
[0x0002] Draw shading as vertical lines that move from left to right. |
|
CLRBALLS_SHADING_TOPBOTTOM |
[0x0003] Draw shading as horizontal lines that move from top to bottom. |
|
CLRBALLS_SHADING_CIRCULAR |
[0x0004] Draw shading as concentric circles. |
|
CLRBALLS_SHADING_ELLIPTICAL |
[0x0005] Draw shading as concentric ellipses. |
|
The following flags indicate how to use the balls: |
|
|
Value |
Meaning |
|
CLRBALLS_STICKER |
[0x0010] Use Balls that will overlap like stickers. |
|
CLRBALLS_BALL |
[0x0020] Use Balls that will adjust like bubbles. |
|
The following flags indicate how to treat the background: |
|
|
Value |
Meaning |
|
CLRBALLS_IMAGE |
[0x0100] Make the background the same as the image. |
|
CLRBALLS_COLOR |
[0x0200] Make the background using crBkgColor and crShadingColor with the specified shade type. |
|
The following flags indicate which type of ball coloring to use: |
|
|
Value |
Meaning |
|
CLRBALLS_BALLCLR_MASK |
[0x1000] Have the Ball color block image colors. |
|
CLRBALLS_BALLCLR_OPACITY |
[0x2000] Use the opacity value when combining image colors with ball colors. |
Returns
SUCCESS |
The function was successful. |
< 1 |
An error occurred. Refer to Return Codes. |
Comments
The CLRBALLS_STICKER flag produces balls with more distinct edges than the CLRBALLS_BALL option.
To update a status bar or detect a user interrupt during execution of this function, refer to LBase::EnableStatusCallback.
This function supports 12 and 16-bit grayscale and 48 and 64-bit color images. Support for 12 and 16-bit grayscale and 48 and 64-bit color images is available only in the Document/Medical toolkits.
If the bitmap has a region, this function works only on the region. If the bitmap does not have a region, this function works on the entire bitmap.
This function does not support signed data images. It returns the error code ERROR_SIGNED_DATA_NOT_SUPPORTED if a signed data image is passed to this function.
This function does not support 32-bit grayscale images. It returns the error code ERROR_GRAY32_UNSUPPORTED if a 32-bit grayscale image is passed to this function.
Required DLLs and Libraries
LTIMGSFX For a listing of the exact DLLs and Libraries needed, based on the toolkit version, refer to Files To Be Included With Your Application. |
Win32, x64.
See Also
Example
#define MAKE_IMAGE_PATH(pFileName) TEXT("C:\\Users\\Public\\Documents\\LEADTOOLS Images\\")pFileName L_INT LBitmap__ColoredBallsExample() { L_INT nRet; COLORREF pBallColors[7]; pBallColors[0] = RGB(230,50,50); pBallColors[1] = RGB(230,200,160); pBallColors[2] = RGB(255,255,128); pBallColors[3] = RGB(240,50,100); pBallColors[4] = RGB(255,255,180); pBallColors[5] = RGB(170,240,100); pBallColors[6] = RGB(255,255,255); LBitmap LeadBitmap; nRet =LeadBitmap.Load(MAKE_IMAGE_PATH(TEXT("IMAGE1.CMP")), 0,ORDER_BGR); if(nRet !=SUCCESS) return nRet; nRet =LeadBitmap.ColoredBalls(1000, 25, 15, 4500, RGB(255,255,255), RGB(255,0,0), RGB(255,255,0), pBallColors, 7, 64, 10, 100, CLRBALLS_SHADING_CIRCULAR| CLRBALLS_STICKER|CLRBALLS_IMAGE| CLRBALLS_BALLCLR_OPACITY); if(nRet !=SUCCESS) return nRet; return SUCCESS; }