LEADTOOLS Image Processing (Leadtools.ImageProcessing.SpecialEffects assembly)
LEAD Technologies, Inc

FunctionalLightCommand Constructor(Int32,Int32,Int32,Int32,Int32,LeadPoint,Int32,FunctionalLightCommandFlags)

Example 





Value that represents the frequency factor. This parameter is used if the FunctionalLightCommandFlags.Trigonometry flag or the FunctionalLightCommandFlags.Freehand flag is set. Valid values range from 1 - 10000. This value is divided internally by 100 (corresponding to a real interval of 0.01 - 100.0).
If the image is grayscale, this parameter represents the amplitude of the master channel. If the image is color and the FunctionalLightCommandFlags.Multiply or FunctionalLightCommandFlags.LinearQuadratic flags are set, this parameter represents the amplitude of each channel. If the image is color and the FunctionalLightCommandFlags.Addition flag is used, this represents the amplitude of the red channel. This value is an integer with a value greater than or equal to 0. This value will be multiplied with the results of the selected function (sine, cosine, user buffer , _). The results of the multiplications are then added to the pixel values. These functions as well as the real buffer values are from -1 to 1. Possible values for this parameter are from 0-100.
Value that represents the amplitude of the green color when the addition operation is used (FunctionalLightCommandFlags.Addition flag is set). This value is ignored when grayscale images are used or when the multiplication operation is used (FunctionalLightCommandFlags.Multiply flag is set). This value is also ignored if the FunctionalLightCommandFlags.LinearQuadratic flag is set. flag. Possible values for this parameter are from 0 - 100.
Value that represents the amplitude of the blue color when the addition operation is used (FunctionalLightCommandFlags.Addition flag is set). This value is ignored when grayscale images are used or when the multiplication operation is used ( FunctionalLightCommandFlags.Multiply flag is set). This value is also ignored if the FunctionalLightCommandFlags.LinearQuadratic flag is set Possible values for this parameter are from 0 -100.
Value that represents the angle, in hundredths of degrees. This parameter is used if the FunctionalLightCommandFlags.Trigonometry or to FunctionalLightCommandFlags.Freehand flag is set. Valid values for this parameter range from -18000 to 18000. This value is divided internally by 100.
Represents the coordinates of the origin, in pixels.This parameter is used if the FunctionalLightCommandFlags.Trigonometry flag and FunctionalLightCommandFlags.Circles flag are set, or if the FunctionalLightCommandFlags.LinearQuadratic flag is set.
Value that represents the phase shift angle, in hundredths of degrees. This parameter is used if the FunctionalLightCommandFlags.Trigonometry flag is set. Possible values for this parameter are from -18000 to 18000. This value will be divided internally by 100.
Flags that indicate the function applied to the image. For a list of the available flags, refer to FunctionalLightCommandFlags.
Initializes a new FunctionalLightCommand class object with explicit parameters. .NET support WinRT support
Syntax
public FunctionalLightCommand( 
   int frequency,
   int redAmplitude,
   int greenAmplitude,
   int blueAmplitude,
   int angle,
   LeadPoint origin,
   int phaseShift,
   FunctionalLightCommandFlags flags
)
'Declaration
 
Public Function New( _
   ByVal frequency As Integer, _
   ByVal redAmplitude As Integer, _
   ByVal greenAmplitude As Integer, _
   ByVal blueAmplitude As Integer, _
   ByVal angle As Integer, _
   ByVal origin As LeadPoint, _
   ByVal phaseShift As Integer, _
   ByVal flags As FunctionalLightCommandFlags _
)
'Usage
 
Dim frequency As Integer
Dim redAmplitude As Integer
Dim greenAmplitude As Integer
Dim blueAmplitude As Integer
Dim angle As Integer
Dim origin As LeadPoint
Dim phaseShift As Integer
Dim flags As FunctionalLightCommandFlags
 
Dim instance As New FunctionalLightCommand(frequency, redAmplitude, greenAmplitude, blueAmplitude, angle, origin, phaseShift, flags)
public FunctionalLightCommand( 
   int frequency,
   int redAmplitude,
   int greenAmplitude,
   int blueAmplitude,
   int angle,
   LeadPoint origin,
   int phaseShift,
   FunctionalLightCommandFlags flags
)
function FunctionalLightCommand( 
   frequency ,
   redAmplitude ,
   greenAmplitude ,
   blueAmplitude ,
   angle ,
   origin ,
   phaseShift ,
   flags 
)
public:
FunctionalLightCommand( 
   int frequency,
   int redAmplitude,
   int greenAmplitude,
   int blueAmplitude,
   int angle,
   LeadPoint origin,
   int phaseShift,
   FunctionalLightCommandFlags flags
)

Parameters

frequency
Value that represents the frequency factor. This parameter is used if the FunctionalLightCommandFlags.Trigonometry flag or the FunctionalLightCommandFlags.Freehand flag is set. Valid values range from 1 - 10000. This value is divided internally by 100 (corresponding to a real interval of 0.01 - 100.0).
redAmplitude
If the image is grayscale, this parameter represents the amplitude of the master channel. If the image is color and the FunctionalLightCommandFlags.Multiply or FunctionalLightCommandFlags.LinearQuadratic flags are set, this parameter represents the amplitude of each channel. If the image is color and the FunctionalLightCommandFlags.Addition flag is used, this represents the amplitude of the red channel. This value is an integer with a value greater than or equal to 0. This value will be multiplied with the results of the selected function (sine, cosine, user buffer , _). The results of the multiplications are then added to the pixel values. These functions as well as the real buffer values are from -1 to 1. Possible values for this parameter are from 0-100.
greenAmplitude
Value that represents the amplitude of the green color when the addition operation is used (FunctionalLightCommandFlags.Addition flag is set). This value is ignored when grayscale images are used or when the multiplication operation is used (FunctionalLightCommandFlags.Multiply flag is set). This value is also ignored if the FunctionalLightCommandFlags.LinearQuadratic flag is set. flag. Possible values for this parameter are from 0 - 100.
blueAmplitude
Value that represents the amplitude of the blue color when the addition operation is used (FunctionalLightCommandFlags.Addition flag is set). This value is ignored when grayscale images are used or when the multiplication operation is used ( FunctionalLightCommandFlags.Multiply flag is set). This value is also ignored if the FunctionalLightCommandFlags.LinearQuadratic flag is set Possible values for this parameter are from 0 -100.
angle
Value that represents the angle, in hundredths of degrees. This parameter is used if the FunctionalLightCommandFlags.Trigonometry or to FunctionalLightCommandFlags.Freehand flag is set. Valid values for this parameter range from -18000 to 18000. This value is divided internally by 100.
origin
Represents the coordinates of the origin, in pixels.This parameter is used if the FunctionalLightCommandFlags.Trigonometry flag and FunctionalLightCommandFlags.Circles flag are set, or if the FunctionalLightCommandFlags.LinearQuadratic flag is set.
phaseShift
Value that represents the phase shift angle, in hundredths of degrees. This parameter is used if the FunctionalLightCommandFlags.Trigonometry flag is set. Possible values for this parameter are from -18000 to 18000. This value will be divided internally by 100.
flags
Flags that indicate the function applied to the image. For a list of the available flags, refer to FunctionalLightCommandFlags.
Example
 
Public Sub FunctionalLightConstructorExample_S2()
   Dim codecs As New RasterCodecs()
   codecs.ThrowExceptionsOnInvalidImages = True

   Dim leadImage As RasterImage = codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "Master.jpg"))

   ' Prepare the command
   Dim command As FunctionalLightCommand = New FunctionalLightCommand(5000, 90, 50, 70, 5000, New LeadPoint(CType((leadImage.Width / 2), Integer), CType((leadImage.Height / 2), Integer)), 2000, FunctionalLightCommandFlags.Trigonometry Or FunctionalLightCommandFlags.Unidirection Or FunctionalLightCommandFlags.Addition)
   ' Apply the linear lighting effect.
   command.Run(leadImage)
   codecs.Save(leadImage, Path.Combine(LEAD_VARS.ImagesDir, "Result.jpg"), RasterImageFormat.Jpeg, 24)

End Sub

Public NotInheritable Class LEAD_VARS
   Public Const ImagesDir As String = "C:\Users\Public\Documents\LEADTOOLS Images"
End Class
public void FunctionalLightConstructorExample_S2()
   {
      // Load an image
      RasterCodecs codecs = new RasterCodecs();
      codecs.ThrowExceptionsOnInvalidImages = true;

      RasterImage image = codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "Master.jpg"));

      // Prepare the command
      FunctionalLightCommand command = new FunctionalLightCommand(5000, 90, 50, 70, 5000, new LeadPoint(image.Width / 2, image.Height / 2), 2000, FunctionalLightCommandFlags.Trigonometry | FunctionalLightCommandFlags.Circles | FunctionalLightCommandFlags.Addition);
      // Apply the linear lighting effect.
      command.Run(image);
      codecs.Save(image, Path.Combine(LEAD_VARS.ImagesDir, "Result.jpg"), RasterImageFormat.Jpeg, 24);

   }

static class LEAD_VARS
{
   public const string ImagesDir = @"C:\Users\Public\Documents\LEADTOOLS Images";
}
[TestMethod]
public async Task FunctionalLightConstructorExample_S2()
{
   // Load an image
   RasterCodecs codecs = new RasterCodecs();
   codecs.ThrowExceptionsOnInvalidImages = true;
   string srcFileName = @"Assets\Image1.cmp";
   StorageFile loadFile = await Tools.AppInstallFolder.GetFileAsync(srcFileName);
   RasterImage image = await codecs.LoadAsync(LeadStreamFactory.Create(loadFile));

   // Prepare the command
   FunctionalLightCommand command = new FunctionalLightCommand(5000, 90, 50, 70, 5000, LeadPointHelper.Create(image.Width / 2, image.Height / 2), 2000, FunctionalLightCommandFlags.Trigonometry | FunctionalLightCommandFlags.Circles | FunctionalLightCommandFlags.Addition);
   // Apply the linear lighting effect.
   command.Run(image);

   string destFileName = @"result.bmp";
   StorageFile saveFile = await Tools.AppLocalFolder.CreateFileAsync(destFileName);
   await codecs.SaveAsync(image, LeadStreamFactory.Create(saveFile), RasterImageFormat.Bmp, 24);
}
Requirements

Target Platforms: Windows 7, Windows Vista SP1 or later, Windows XP SP3, Windows Server 2008 (Server Core not supported), Windows Server 2008 R2 (Server Core supported with SP1 or later), Windows Server 2003 SP2

See Also

Reference

FunctionalLightCommand Class
FunctionalLightCommand Members
Overload List

 

 


Products | Support | Contact Us | Copyright Notices

© 2006-2012 All Rights Reserved. LEAD Technologies, Inc.