LEADTOOLS Filters Help > Filters, Codecs and Interfaces > Audio Filters > Detection Filter > ILMADet Interface |
The portion of the file holding the audio data. The audio data might be compressed to save disk space. The data has to be decompressed using an audio decompressor before you can play (hear) it.
oftware component which decompresses audio. It must be designed to work with ACM or DirectShow . Note that different compression methods require different decompressors. There is no universal decompressor capable of decoding all compressed streams.
This is the interface for the LEAD Audio Detection Filter (2.0).
Interface Properties:
Type |
Name |
Description |
ILMADetUserCallback
|
CallbackObj |
(write-only) Sets the callback object pointer. If not NULL, the CallbackProc method of this interface is called to report audio detection events. Set to NULL (or to "Nothing" in VB) in order to stop receiving notifications. (For example, before deleting the callback object interface). |
VARIANT_BOOL |
Enable |
Enables or disables audio detection. Set to TRUE to enable audio detection and receive event notifications. |
long |
Threshold |
The threshold (in dB) used to detect sound. The allowed range is 40 to 0. 40 is equivalent to absolute silence and 0 is the loudest possible sound. All sounds below this threshold are considered silence. Set this depending on your microphone. Usually, a value between38 and 30 is used. |
long |
MinSilenceTime |
The minimum length of silence periods (in milliseconds). Silences shorter than the MinSilenceTime are considered part of the sound. Set this value so short pauses do not trigger false silences. Most conversations contain short silences while the people talking draw their breath, or pause while they are thinking. |
long |
LeftLevel |
(read-only) The intensity (power) of the signal in the left channel (in dB). Note: If the audio stream is mono, the values of LeftLevel and RightLevel are the same. |
long |
RightLevel |
(read-only) The intensity (power) of the signal in the right channel (in dB). Note: If the audio stream is mono, the values of LeftLevel and RightLevel are the same. |
long |
Interval |
The time intervals at which the filter will check the stream for audio data. This value is in milliseconds. |
long |
Delay |
The amount of time the filter waits before it starts checking the stream for sound data (sound detection). This value is in milliseconds. |
VARIANT_BOOL |
AutoStart |
Flag that indicates whether to start sound detection when streaming starts. Set this to VARIANT_TRUE to have the filter start sound detection when streaming starts. Set this to VARIANT_FALSE to start sound detection manually. Note that if the Delay property has been set, sound detection does not begin, regardless of the value of AutoStart, until the delay period has elapsed. |
AudDetStateConstants |
State |
(read only) Indicates the state of audio detection. Possible values are: AUDDET_STATE_RUNNING: The filter is processing streaming data and the sound detection process has started. AUDDET_STATE_STOPPED: The filter is not processing streaming data and the sound detection process is not running. |
IUnknown |
CallbackObj2 |
(write-only) Sets the callback object pointer. If not NULL, the CallbackProc method of this interface will be called to report audio detection events. Set to NULL (or to "Nothing" in VB in order to stop receiving notifications. (For example, before deleting the callback object interface). There are two types of callbacks that can be set: - ILMADetUserCallback uses variants, while - ILMADetUserCallback2 uses a pointer to the data cast as LONGLONG (__int64). VB 6.0 or earlier users should use a ILMADetUserCallback interface, while C# and VB.NET users should use a ILMADetUserCallback2 interface. C/C++ users can use either interface. |
Returns
S_OK |
The method succeeded. |
VFW_E_NOT_CONNECTED |
An error has occurred, either the input or output pin is not connected. |
VFW_E_NOT_RUNNING |
The filter in not in the running state. |
Comments
This method starts sound detection manually. If the Delay property has been set, sound detection will not begin until the delay period has elapsed.
To have the filter automatically start sound detection when streaming starts, set the AutoStart property to VARIANT_TRUE and do not call this method. Again, even if AutoStart is set to VARIANT_TRUE, if the Delay property has been set, sound detection will not begin until the delay period has elapsed.
Stops sound detection.
Returns
S_OK |
The method succeeded. |
VFW_E_NOT_CONNECTED |
An error has occurred, either the input or output pin is not connected. |
Description:
Resets the filter properties to their default values. Calling this method might cause the filter to reconnect its output pin.
Comments:
The method will fail if the filter is in the running state.
Returns
S_OK |
The method succeeded. |
VFW_E_WRONG_STATE |
The filter is in the wrong state. |