LEADTOOLS Filters Help
| LEADTOOLS Filters Help > Filters, Codecs and Interfaces > Audio Filters > Callback Filter > ilmausercallback3 interface |
Implement this user callback interface in order to receive audio buffers. Register the callback by setting the ILMACallback::CallbackObj2 property. This interface has one method, which is called by the LEAD Audio Callback Filter whenever the filter receives an audio buffer.
DirectShow determines the duration of the audio buffer. However, if you use the LEADTOOLS Multimedia toolkit, you can change the size of the audio buffers using the get_AudioBufferSize property.
This interface should be used for C++, .NET or other programming languages that can cast a LONGLONG (__int64) to a pointer. See below for .NET examples (C# and VB.NET) of a class implementing this interface.
Use the ILMAUserCallback2 interface to use a pointer to the data, cast as a 32-bit long value. Use the ILMAUserCallback interface to use variants.
This function is called each time an audio sample is received by the filter.
Parameters
|
pData |
Pointer to the sample data cast as a 64-bit LONGLONG (__int64). The sample data is an array of unsigned bytes (8-bit) or signed short (16-bit) values. This value should be cast to a pointer to either unsigned byte or signed short, depending on the value of lBitsPerSample. |
|
lDataSize |
The number of elements in pData. If lBitsPerSample is 8, then this also represents the size (in bytes) of the buffer pointed to by pData. If lBitsPerSample is 16, then the size of the pData buffer is lDataSize * 2. |
|
lBitsPerSample |
Number of bits per sample of mono data, which determines the format of the data pointed to by pData. Valid values are 8 and 16. |
|
lChannels |
Number of channels (i.e. 1=mono, 2=stereo...) |
|
lSamplesPerSec |
Sample rate, in samples per second. |
|
lAvgBytesPerSec |
Average bandwidth, in bytes per second. It should be equal to lSamplesPerSec * lChannels * (lBitsPerSample / 8). |
Returns
|
AUDCALBK_ERR_OK |
Success. The sample data array passes downstream. |
|
AUDCALBK_ERR_DROP |
Drop this sample. The sample data array does not pass downstream. |
|
AUDCALBK_ERR_DELIVERLASTSAMPLE |
Repeat the last successfully delivered sample. |
|
Other error codes |
Any other error codes are returned by the filter as is. The data does not pass downstream. |
Comments
Format of audio data:
The general format of the audio data (lChannels) is as follows:
Sample 0
|
Channel 0 |
Channel 1 |
- |
Channel lChannels - 1 |
In this case,
pData(0) is Sample 0, Channel 0
pData(1) is Sample 0, Channel 1
pData(lChannels - 1) is Sample 0, Channel lChannels -1
pData(lChannels) is Sample 1, Channel 0
pData(lChannels + 1) is Sample 1, Channel 1
The format for mono data is simple, because there is only one channel. In this case, every value in the array is one sample:
pData(0) is Sample 0
pData(1) is Sample 1
The format for stereo data is still simple: there are two values per sample (one for the left channel and the other for the right channel):
pData(0) is Sample 0, Left channel
pData(1) is Sample 0, Right channel
pData(2) is Sample 1, Left channel
pData(3) is Sample 1, Right channel
The format of the value depends on whether lBitsPerChannel is 8 or 16.
Format of 8-bit audio data:
The values in the array are unsigned and range between 0 and 255. The real audio value is obtained by subtracting 128 from the array value, and should range between -128 and 127. When changing the value, remember to add 128 before putting the data back.
Format of 16-bit data:
The values in the array are signed and range between -32768 and 32767. They contain the real audio values. It is not necessary to perform conversions like those for the 8-bit data.
Examples
Example1: Fast C# code (using unsafe code)
This C# code silences the sound track by setting all sound values to 0. Note that this sample uses pointers, which means your application must be compiled using unsafe code. For slower, safe code, look at the second example, which is written in VB.NET.
private void Form1_Load(object sender, EventArgs e)
{
string file = @"c:\myfile.avi";
// Insert Audio Callback Filter
LTMMLib.ltmmProcessor proc = GetAudioProcessor("LEAD Audio Callback Filter");
playControl.SelectedAudioProcessors.Add(proc, 0);
// Hook callback.
LMACallbackLib.LMACallback audioCallback = (LMACallbackLib.LMACallback)playControl.GetSubObject((int)LTMMLib.ltmmPlay_Object.ltmmPlay_Object_SelAudioProcessor);
audioCallback.CallbackObj2 = new AudioCallback(audioCallback);
// Play it.
playControl.sourcefile = file;
}
public class AudioCallback : LMACallbackLib.ILMAUserCallback3
{
unsafe public void CallbackProc(long pData, int lDataSize, int lBitsPerSample, int lChannels, int lSamplesPerSec, int lAvgBytesPerSec)
{
IntPtr ptrData = new IntPtr(pData);
int i;
if (lBitsPerPixel == 16)
{
short* ptrData16 = (short*)ptrData.ToPointer();
for(i = 0; i < lDataSize; i++)
ptrData16[i] = 0;
}
else
{
byte* ptrData8 = (byte*)ptrData.ToPointer();
for(i = 0; i < lDataSize; i++)
ptrData8[i] = 0;
}
' If you need to return a HRESULT other than AUDCALBK_ERR_OK, then you need to throw an exception
' throw new ReturnValueException(LMACallbackLib.AudCalBkErrConstants.AUDCALBK_ERR_XXX);
}
}
Example2: VB.NET code (slower, but using safe code)
This VB.NET code silences the sound track by setting all of the sound values to 0. Note that this sample is safe, does not use pointers, but is slower than the unsafe code above.
Public Class VBAudioCallback : Implements LMACallbackLib.ILMAUserCallback3
Public Sub New()
End Sub
Sub CallbackProc(ByVal pData As Long, ByVal lDataSize As Integer, ByVal lBitsPerSample As Integer, ByVal lChannels As Integer, ByVal lSamplesPerSec As Integer, ByVal lAvgBytesPerSec As Integer) Implements LMACallbackLib.ILMAUserCallback3.CallbackProc
Dim ptrData As IntPtr = New IntPtr(pData)
Dim i As Integer
' copy the data to a managed array, since VB does not support pointers.
If lBitsPerSample = 16 Then
Dim ptrData16(lDataSize) As Short
' Copy data from pData into ptrData16
System.Runtime.InteropServices.Marshal.Copy(ptrData, ptrData16, 0, lDataSize)
' set the data to 0
For i = 0 To lDataSize - 1
ptrData16(i) = 0
Next
' copy the data back into ptrData
System.Runtime.InteropServices.Marshal.Copy(ptrData16, 0, ptrData, lDataSize)
Else
Dim ptrData8(lDataSize) As Byte
' Copy data from pData into ptrData8
System.Runtime.InteropServices.Marshal.Copy(ptrData, ptrData8, 0, lDataSize)
' set the data to 0
For i = 0 To lDataSize - 1
ptrData8(i) = 0
Next
' copy the data back into ptrData
System.Runtime.InteropServices.Marshal.Copy(ptrData8, 0, ptrData, lDataSize)
End If
End Sub
End Class
