ILTStlImgWrt Interface

 

Data types

1. File Flags:

#define SHOWPROG 0x01
#define SHOWQFACTOR 0x02
#define SHOWMULTIPAGE 0x04
#define SHOWSTAMP 0x08
#define LOSSLESS_JPEG 0x10

Describe possible values for the InfoFileTypeFlags property and the InfoFileSubTypeFlags property listed in the Interface Properties section below.

2. File Save Options:

typedef [v1_enum] enum FileSaveOptions
{
   SAVE_OPTION_OVERWRITE = 1,
   SAVE_OPTION_SKIP = 2,
   SAVE_OPTION_USE_NEXT_NAME = 4,
   SAVE_OPTION_APPLYTOALL = 8,
} FileSaveOptions;

Describes possible options when trying to save to a file that already exists.

Constant

Description

SAVE_OPTION_OVERWRITE

Save the current frame over the existing file if it currently exists.

SAVE_OPTION_SKIP

Skip saving the current frame if the file name currently exists.

SAVE_OPTION_USE_NEXT_NAME

Generate the next file name if the file name currently exists.

SAVE_OPTION_APPLYTOALL

Apply the option to all subsequent cases.

3.File Format Types:

These are the same as in the LEADTOOLS Raster Imaging documentation. For a complete list of format types, refer to Summary of All Supported Image File Formats   .

typedef [v1_enum] enum FileTypeConstants
{
   SAVEFILE_CMP                   = 5,
   SAVEFILE_LEAD1BIT = 26,
   SAVEFILE_JFIF = 10,
   SAVEFILE_CMW = 165,
   SAVEFILE_J2K = 164,
   SAVEFILE_TIF = 3,
   SAVEFILE_GIF = 2,
   SAVEFILE_PNG = 75,
   SAVEFILE_CALS = 50,
   SAVEFILE_CLP = 114,
   SAVEFILE_DICOM_GRAY = 89,
   SAVEFILE_DICOM_COLOR = 90,
   SAVEFILE_CUT = 108,
   SAVEFILE_EMF = 116,
   SAVEFILE_EPS = 16,
   SAVEFILE_EXIF = 96,
   SAVEFILE_FAX_G4 = 68,
   SAVEFILE_FLC = 134,
   SAVEFILE_FPX = 80,
   SAVEFILE_IMG = 52,
   SAVEFILE_IFF_ILBM = 111,
   SAVEFILE_ICA_G4 = 73,
   SAVEFILE_INTERGRAPH_RLE = 122,
   SAVEFILE_JBIG = 115,
   SAVEFILE_MAC = 51,
   SAVEFILE_PCT = 56,
   SAVEFILE_RAWICA_G4 = 79,
   SAVEFILE_MSP = 53,
   SAVEFILE_OS2 = 14,
   SAVEFILE_PBM_ASCII = 106,
   SAVEFILE_PCX = 1,
   SAVEFILE_PGM_ASCII = 104,
   SAVEFILE_PPM_ASCII = 106,
   SAVEFILE_PSD = 76,
   SAVEFILE_RAW = 153,
   SAVEFILE_SCT = 250,
   SAVEFILE_SGI = 142,
   SAVEFILE_RAS = 55,
   SAVEFILE_TGA = 4,
   SAVEFILE_WFX_G4 = 70,
   SAVEFILE_BMP = 6,
   SAVEFILE_WIN_CUR = 92,
   SAVEFILE_WIN_ICO = 91,
   SAVEFILE_WBMP = 170,
   SAVEFILE_WMF = 15,
   SAVEFILE_WPG = 54,
   SAVEFILE_XBM = 110,
   SAVEFILE_SMP = 256,
   SAVEFILE_XPM = 109,
   SAVEFILE_XWD10 = 132,
   SAVEFILE_XWD11 = 133
} FileTypeConstants;

Constant

Description

SAVEFILE_CMP

LEAD CMP

SAVEFILE_LEAD1BIT

LEAD 1 bit, lossless compression

SAVEFILE_JFIF

Jpeg File Interchange Format

SAVEFILE_CMW

Wavelet CMP

SAVEFILE_J2K

Jpeg2000 stream

SAVEFILE_TIF

Tagged Image File Format

SAVEFILE_GIF

CompuServe GIF

SAVEFILE_PNG

Portable Network Graphics

SAVEFILE_CALS

CALS Raster file

SAVEFILE_CLP

Microsoft Windows Clipboard Uncompressed

SAVEFILE_DICOM_GRAY

Grayscale DICOM uncompressed

SAVEFILE_DICOM_COLOR

Color DICOM uncompressed

SAVEFILE_CUT

Dr. Halo.

SAVEFILE_EMF

Windows Enhanced Metafile

SAVEFILE_EPS

Encapsulated PostScript

SAVEFILE_EXIF

Uncompressed RGB Exif file

SAVEFILE_FAX_G4

Raw FAX, compressed using CCITT group 4

SAVEFILE_FLC

Flic Animation 256 color

SAVEFILE_FPX

FlashPix, with no compression

SAVEFILE_IMG

GEM Image

SAVEFILE_IFF_ILBM

Interchange File - RLE Compressed.

SAVEFILE_ICA_G4

IOCA, compressed using CCITT group 4

SAVEFILE_INTERGRAPH_RLE

ITG, Intergraph RLE compressed file

SAVEFILE_JBIG

JBIG compression.

SAVEFILE_MAC

MacPaint - Macintosh Paint

SAVEFILE_PCT

Macintosh QuickDraw

SAVEFILE_RAWICA_G4

IOCA, compressed using CCITT group 3, 2 dimensions, without the MO:DCA wrapper.

SAVEFILE_MSP

Microsoft Paint

SAVEFILE_OS2

OS/2 BMP version 1.x

SAVEFILE_PBM_ASCII

Portable Bitmap - ASCII File

SAVEFILE_PCX

ZSoft PCX

SAVEFILE_PGM_ASCII

Portable Greymap - ASCII File

SAVEFILE_PPM_ASCII

Portable Pixelmap - ASCII File

SAVEFILE_PSD

Adobe Photoshop 3.0.

SAVEFILE_RAW

Raw uncompressed data

SAVEFILE_SCT

Scitex Continuous Tone Format

SAVEFILE_SGI

Silicon Graphics Image uncompressed

SAVEFILE_RAS

Sun Raster, uncompressed

SAVEFILE_TGA

TARGA, uncompressed

SAVEFILE_WFX_G4

Winfax, compressed using CCITT group

SAVEFILE_BMP

Windows BMP, with no compression

SAVEFILE_WIN_CUR

Windows Cursor

SAVEFILE_WIN_ICO

Windows Icon

SAVEFILE_WBMP

Wireless Bitmap

SAVEFILE_WMF

Windows Metafile

SAVEFILE_WPG

WordPerfect Graphics Format

SAVEFILE_XBM

XWindows XbitMap

SAVEFILE_SMP

Xionics format

SAVEFILE_XPM

XWindows XPicMap

SAVEFILE_XWD10

XWindows X Window dump, version 10

SAVEFILE_XWD11

XWindows X Window dump, version 11

 

 

4.Callback Options:

typedef [v1_enum] enum SaveCallbackFlagsOptions
{
FRAME_OPTION_SAVE = 0,
FRAME_OPTION_SKIP = 1,
FRAME_OPTION_SKIP_AND_KEEP_NAME = 2
} SaveCallbackFlagsConstants;

Describes possible options when saving data using the callback.

Constant

Description

FRAME_OPTION_SAVE

The filter will save the frame.

FRAME_OPTION_SKIP

The filter will not save the frame and will use the next output file name sequence for the next frame.

FRAME_OPTION_SKIP_AND_KEEP_NAME

The filter will not save the frame and will use the current output file name sequence for the next frame.

 

Interface Properties

 

Type

Property name

Description

long

BitsPerPixel

Gets or sets the bits per pixel for the current file type. Changing this property will also change the FileTypeIndex, IsQFactorSupported, IsMultipageSupported and FileSubTypeIndex properties.

BSTR

FileName

Gets or sets the output file name. If the filter is loaded without specifying an output file name, a temporary file name is generated and the user is asked whether to use the temporary filename or not. If the user chooses not to use the temporary file name, the graph will not run.

The user is responsible for freeing the allocated string.

long

FileSubTypeIndex

Gets or sets the current file subtype index. If the current file type has no subtypes, then trying to get or set this property will result in an E_INVALIDARG error.

FileTypeConstants

FileTypeFormat

Gets or sets the current file type format. Changing this value will also change the FileSubTypeIndex property. Generally, any change to this property will affect the following properties: FileTypeIndex, BitsPerPixel, IsQFactorSupported, IsMultipageSupported and FileSubTypeIndex. This property takes one of the enumerated "x-text-underline: normal; /*begin!kadov{{*/ text-decoration: underline; /*}}end!kadov*/ ">FileTypeConstants. The file formats are the same as in the LEADTOOLS Raster Imaging documentation. For a complete list of format types, see "Formats of Output Files" in either the Ltcomn.hlp file or the Ltdlln.hlp file. These files are located in the LEAD/HELP directory, where LEAD represents the directory in which you installed the toolkit.

long

FileTypeIndex

Gets or sets the file type index. Any change in this value will affect the following properties: FileTypeFormat, BitsPerPixel, IsQFactorSupported, IsMultipageSupported, and FileSubTypeIndex.

SaveFileOptions

HandleExistingFile

Gets or sets the option for handling existing files (overwriting options) when saving. For a list of possible values, refer to File Save Options.

SAVE_OPTION_APPLYTOALL can be ORed with the chosen option to apply it to all subsequent cases.

long

InfoFileSubTypeFlags(long lFileTypeIndex);

Read only. Gets the subtype flags for the file type and file subtype at the specified index. For a list of possible values, refer to File Flags. Please note that these values may be combined using OR.

long

InfoFileSubTypeFormat(long lFileTypeIndex);

Read only. Gets the subtype format for the file type and file subtype at the specified index.

long

InfoFileSubTypesCount(long lFileTypeIndex);

Read only. Gets the number of subtypes for the file type at the specified index.

BSTR

InfoFileSubTypeString(long lFileSubTypeIndex)

Read only. Gets the subtype string for the file type and file subtype at the specified index.

The user is responsible for freeing the allocated string.

long

InfoFileTypeBpp(long lIndex)

Read only. Gets the bits per pixel for the file type at the specified index.

BSTR

InfoFileTypeExt(long lIndex)

Read only. Gets the extension string for the file type at the specified index.

The user is responsible for freeing the allocated string.

long

InfoFileTypeFlags(long lIndex)

Read only. Gets the flags for the file type at the specified index. For a list of possible values, refer to File Flags. Please note that these values may be combined using OR.

long

InfoFileTypeFormat(long lIndex)

Read only. Gets the file type format for the specified file type index. The file formats are the same as in the LEADTOOLS Raster Imaging documentation. For a complete list of format types, see "Formats of Output Files" in either the Ltcomn.hlp file or the Ltdlln.hlp file. These files are located in the LEAD/HELP directory, where LEAD represents the directory in which you installed the toolkit.

BSTR

InfoFileTypeString(long lIndex)

Read only. Gets the file type string for the specified file type index.

The user is responsible for freeing the allocated string.

VARIANT_BOOL

InputPinStreamingState

Read only. Retrieves the streaming state of the input pin; VARIANT_TRUE if running and VARIANT_FALSE otherwise.

VARIANT_BOOL

IsMultipageSupported

(Read only) Indicates whether the current file type supports multi-page files.

VARIANT_BOOL

IsQFactorSupported

(Read only) Indicates whether the current file type supports the QFactor for controlling the file compression.

long

LastErrorCode

(Read only) Gets the last error code. This will be one of the standard LEADTOOLS error codes. For a list of possible error codes, refer to    Return Codes.

BSTR

LastErrorString

(Read only) Gets the last error string.

The user is responsible for freeing the allocated string.

long

NumberingDigits

Gets or sets the number of digits to use in the output file sequence names.

VARIANT_BOOL

PromptOverwrite

Enables or disables prompting for the file overwrite options. If this property is set to VARIANT_TRUE, a dialog will be shown if the next file name to be used already exists. The dialog will offer the overwrite, skip, and use next available name options in addition to an apply for all option. If this property is set to VARIANT_FALSE, the option in the HandleExistingFile property will be used without asking.

long

QFactor

Gets or sets the QFactor for the current file type format.

VARIANT_BOOL

SaveMultipage

Enables or disables saving to a multi-page file. This will only affect formats that support multi-page files. See also the IsMultipageSupported property.

ILTStlImgWrtUserCallback

SaveOptionsCallback

Sets the callback object pointer. For more information, refer to the ILTStlImgWrtUserCallback interface.

long

SupportedFileTypesCount

Read only. Retrieves the number of file types that the filter can save. This can be used to loop through all the supported types getting information such as the string, the bits per pixel, the extension, etc. This can help you build your own user interface.

VARIANT_BOOL

UseTempFileName

Gets or sets a flag that indicates whether to use the temp file name if the user did not set the output file name in the FileName property. If the value is VARIANT_TRUE the filter will create a temp file name and use it. If the value is VARIANT_FALSE the filter will create a temp file and ask the user if he wants to save the frame using the temp file name.

Long

DialogParentWnd

Gets or sets the window handle for the messages boxes and the prompt dialog.

VARIANT_BOOL

EnableMessageBoxes

Enables or disables the displaying of the messages boxes when an error occurred.

 

Interface Methods:

HRESULT ResetErrorCode()

Description

To reset the last error value to success.

 

Returns

S_OK if successful, or another error code otherwise.