LBitmap::Punch

#include "ltwrappr.h"

virtual L_INT LBitmap::Punch (nValue, uStress, CenterPt, crFill, uFlags)

L_INT nValue;	/* stretch amount */
L_UINT uStress;	/* punching intensity */
POINT CenterPt;	/* effect center */
COLORREF crFill;	/* fill color */
L_UINT uFlags;	/* flags */

Warps the bitmap by pinching it toward the center or expanding the bitmap away from its center. This function is available in the Raster Pro and above toolkits.

Parameter	Description
nValue	Amount of stretching where :
	Positive values: pinch the image toward its center.
	Negative values: expand the image away from its center.
	Valid values range from –500 to 500.
uStress	Amount of punching intensity. This value is ignored when nValue is less than 0. Valid values range from 0 to 1000.
CenterPt	POINT structure that contains the point around which the image will be pinched or punched.
crFill	The COLORREF value that specifies the fill color for any exposed areas. You can specify a COLORREF value, such as the return value of the Windows RGB macro, or you can use the PALETTEINDEX macro to specify a palette color.
uFlags	Flags that indicate how to handle exposed areas, both centrally and peripherally. You can use a bitwise OR (\|) to specify one flag from each group.
	The following are the flags that indicate how to handle peripherally exposed areas:
	Value	Meaning
	FILL_CLR	[0x0000] Fill any exposed areas with crFill.
	FILL_RPT	[0x0001] Stretch the image edges to fill the exposed area.
	FILL_NOCHG	[0x0002] Leave the exposed area as is, without changing it.
	The following are the flags that indicate how to handle centrally exposed areas:
	Value	Meaning
	FILL_ROT	[0x0000] Rotate the image inside the pinch pattern.
	FILL_WOUTROT	[0x0010] Fill the exposed center the same way the peripherally exposed areas are filled.
	This flag is ignored if the nValue is positive.

Returns

SUCCESS	The function was successful.
< 1	An error occurred. Refer to Return Codes.

Comments

This function will punch or pinch the bitmap around the specified CenterPt. The center point must be defined inside the bitmap or inside the region, if the bitmap has a region.

If the bitmap has a region, the effect will be applied on the region only.

This function supports 12 and 16-bit grayscale and 48 and 64-bit color images. Support for 12 and 16-bit grayscale and 48 and 64-bit color images is available only in the Document/Medical toolkits.

This function does not support signed data images. It returns the error code ERROR_SIGNED_DATA_NOT_SUPPORTED if a signed data image is passed to this function.

Required DLLs and Libraries

LTIMG

For a listing of the exact DLLs and Libraries needed, based on the toolkit version, refer to Files To Be Included With Your Application.

See Also

Functions:	LBitmap::BricksTexture, LBitmap::Canvas, LBitmap::Clouds, LBitmap::ColoredBalls, LBitmap::DiffuseGlow, LBitmap::DisplaceMap, LBitmap::Fragment, LBitmap::HalfTonePattern, LBitmap::MaskConvolution, LBitmap::MosaicTiles, LBitmap::Offset, LBitmap::Perspective, LBitmap::PlasmaFilter, LBitmap::Pointillist, LBitmap::RomanMosaic, LBitmap::Vignette, LBitmap::ZigZag, LBitmap::AddNoise, LBitmap::Emboss, LBitmap::Mosaic, LBitmap::MotionBlur, LBitmap::Oilify, LBitmap::Posterize, LBitmap::RemoveRedeye, LBitmap::Solarize, LBitmapBase::Underlay, LDialogImageEffect::DoModalPunch, LBitmap::Bending, LBitmap::Cylindrical, LBitmap::FreeHandShear, LBitmap::Impressionist, LBitmap::FreeHandWave, LBitmap::Pixelate, LBitmap::Polar, LBitmap::RadialBlur, LBitmap::RadWave, LBitmap::Ripple, LBitmap::Spherize, LBitmap::Swirl, LBitmap::Wave, LBitmap::Wind, LBitmap::ZoomBlur, LBitmap::ZoomWave
Topics:	Raster Image Functions: Doing Geometric Transformations
	Processing an Image
	Applying Artistic Effects
	Using Color Values in LEADTOOLS

Example

void MyTestFunction(LAnimationWindow * LAniWnd)
{
   POINT  CenterPt;
   CenterPt.x  =  (LAniWnd->GetHandle ())->Width/2;
   CenterPt.y  =  (LAniWnd->GetHandle ())->Height/2;

   LAniWnd->Punch(100, 100, CenterPt,  0, FILL_RPT | FILL_WOUTROT);
}