LEADTOOLS Image Processing (Leadtools.ImageProcessing.SpecialEffects assembly) Send comments on this topic. | Back to Introduction - All Topics | Help Version 17.0.3.29
PlaneBendCommand Constructor(LeadPoint,Int32,Int32,Int32,Int32,Int32,Int32,Int32,Int32,Int32,Int32,RasterColor,RasterColor,PlaneCommandFlags)
See Also  Example
Leadtools.ImageProcessing.SpecialEffects Namespace > PlaneBendCommand Class > PlaneBendCommand Constructor : PlaneBendCommand Constructor(LeadPoint,Int32,Int32,Int32,Int32,Int32,Int32,Int32,Int32,Int32,Int32,RasterColor,RasterColor,PlaneCommandFlags)



centerPoint
Contains the point at which the camera or viewer is looking. This is also the point toward which the images will be bent. It may be outside the image borders.
zValue
Viewing screen offset on the Z-axis, in pixels.
distance
Camera distance from the viewing screen, in pixels.
planeOffset
Distance between the parallel planes. This property only accepts positive values.
repeat
Number of times the image repeats along the Z-axis. If Repeat equals -1 the image will be infinitely repeated. Its range starts from -1.
pyramidAngle
The view angle, off the Z-axis. This value is given in hundredths of a degree (+/-). This can be a number from 0 to 36,000.
stretch
Value that indicates whether to expand or compress the image, and by how much. If Stretch < 100 image will be expanded. If stretch > 100 the image will be compressed. Use 100 to maintain the image's dimensions. The value of this parameter is internally divided by 100. This parameter only accepts positive values.
bendFactor
Determines the plane's bending value. The range starts at 100 and increases indefinitely. If bendFactor equals 100 the planes will not be bent.If bendFactor > 100 planes will be bent. The value of this parameter is internally divided by 100. This parameter only accepts positive values.
startBright
Value that indicates the brightness of an external light source on the first image displayed. Possible values range from 0 to 100. A value of 0 indicates no external light displayed on the image. A value of 100 indicates an external light source with full brightness is displayed on the image.
endBright
Value that indicates the brightness of an external light source on the last image displayed. Possible values range from 0 to 100. A value of 0 indicates no external light displayed on the image. A value of 100 indicates an external light source with full brightness is displayed on the image.
brightLength
Value that indicates how much the brightness changes as you move along the Z axis. This parameter is internally multiplied by 50.
brightColor
Specifies the color of an external light source that shines on the displayed images.
fillColor
Specifies the background color.
flags
Flags that indicate the background color and the planes to be shown. You can use a bit wise OR (|) to specify one flag from each group.
Initializes a new Leadtools.ImageProcessing.SpecialEffects.PlaneBendCommand class object with explicit parameters.

Syntax

Visual Basic (Declaration) 
Public Function New( _
   ByVal centerPoint As LeadPoint, _
   ByVal zValue As Integer, _
   ByVal distance As Integer, _
   ByVal planeOffset As Integer, _
   ByVal repeat As Integer, _
   ByVal pyramidAngle As Integer, _
   ByVal stretch As Integer, _
   ByVal bendFactor As Integer, _
   ByVal startBright As Integer, _
   ByVal endBright As Integer, _
   ByVal brightLength As Integer, _
   ByVal brightColor As RasterColor, _
   ByVal fillColor As RasterColor, _
   ByVal flags As PlaneCommandFlags _
)
Visual Basic (Usage)Copy Code
Dim centerPoint As LeadPoint
Dim zValue As Integer
Dim distance As Integer
Dim planeOffset As Integer
Dim repeat As Integer
Dim pyramidAngle As Integer
Dim stretch As Integer
Dim bendFactor As Integer
Dim startBright As Integer
Dim endBright As Integer
Dim brightLength As Integer
Dim brightColor As RasterColor
Dim fillColor As RasterColor
Dim flags As PlaneCommandFlags
 
Dim instance As New PlaneBendCommand(centerPoint, zValue, distance, planeOffset, repeat, pyramidAngle, stretch, bendFactor, startBright, endBright, brightLength, brightColor, fillColor, flags)
C# 
public PlaneBendCommand( 
   LeadPoint centerPoint,
   int zValue,
   int distance,
   int planeOffset,
   int repeat,
   int pyramidAngle,
   int stretch,
   int bendFactor,
   int startBright,
   int endBright,
   int brightLength,
   RasterColor brightColor,
   RasterColor fillColor,
   PlaneCommandFlags flags
)
C++/CLI 
public:
PlaneBendCommand( 
   LeadPoint centerPoint,
   int zValue,
   int distance,
   int planeOffset,
   int repeat,
   int pyramidAngle,
   int stretch,
   int bendFactor,
   int startBright,
   int endBright,
   int brightLength,
   RasterColor brightColor,
   RasterColor fillColor,
   PlaneCommandFlags flags
)

Parameters

centerPoint
Contains the point at which the camera or viewer is looking. This is also the point toward which the images will be bent. It may be outside the image borders.
zValue
Viewing screen offset on the Z-axis, in pixels.
distance
Camera distance from the viewing screen, in pixels.
planeOffset
Distance between the parallel planes. This property only accepts positive values.
repeat
Number of times the image repeats along the Z-axis. If Repeat equals -1 the image will be infinitely repeated. Its range starts from -1.
pyramidAngle
The view angle, off the Z-axis. This value is given in hundredths of a degree (+/-). This can be a number from 0 to 36,000.
stretch
Value that indicates whether to expand or compress the image, and by how much. If Stretch < 100 image will be expanded. If stretch > 100 the image will be compressed. Use 100 to maintain the image's dimensions. The value of this parameter is internally divided by 100. This parameter only accepts positive values.
bendFactor
Determines the plane's bending value. The range starts at 100 and increases indefinitely. If bendFactor equals 100 the planes will not be bent.If bendFactor > 100 planes will be bent. The value of this parameter is internally divided by 100. This parameter only accepts positive values.
startBright
Value that indicates the brightness of an external light source on the first image displayed. Possible values range from 0 to 100. A value of 0 indicates no external light displayed on the image. A value of 100 indicates an external light source with full brightness is displayed on the image.
endBright
Value that indicates the brightness of an external light source on the last image displayed. Possible values range from 0 to 100. A value of 0 indicates no external light displayed on the image. A value of 100 indicates an external light source with full brightness is displayed on the image.
brightLength
Value that indicates how much the brightness changes as you move along the Z axis. This parameter is internally multiplied by 50.
brightColor
Specifies the color of an external light source that shines on the displayed images.
fillColor
Specifies the background color.
flags
Flags that indicate the background color and the planes to be shown. You can use a bit wise OR (|) to specify one flag from each group.

Example

Run the Leadtools.ImageProcessing.SpecialEffects.PlaneBendCommand on an image.

Visual BasicCopy Code
Public Sub PlaneBendConstructorExample()
   Dim codecs As New RasterCodecs()
   codecs.ThrowExceptionsOnInvalidImages = True

   Dim leadImage As RasterImage = codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "Master.jpg"))

   ' Prepare the command
   Dim command As PlaneBendCommand = New PlaneBendCommand(New LeadPoint(CType((leadImage.Width / 2), Integer), CType((leadImage.Height / 2), Integer)), 0, leadImage.Height, CType((leadImage.Width / 2), Integer), -1, 0, 100, 400, 0, 100, 20000, New RasterColor(255, 255, 255), New RasterColor(0, 0, 0), PlaneCommandFlags.Down Or PlaneCommandFlags.Up Or PlaneCommandFlags.Color)
   command.Run(leadImage)
   codecs.Save(leadImage, Path.Combine(LEAD_VARS.ImagesDir, "Result.jpg"), RasterImageFormat.Jpeg, 24)

End Sub

Public NotInheritable Class LEAD_VARS
   Public Const ImagesDir As String = "C:\Users\Public\Documents\LEADTOOLS Images"
End Class
C#Copy Code
public void PlaneBendConstructorExample()
   {
      // Load an image
      RasterCodecs codecs = new RasterCodecs();
      codecs.ThrowExceptionsOnInvalidImages = true;

      RasterImage image = codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "Master.jpg"));

      // Prepare the command
      PlaneBendCommand command = new PlaneBendCommand(new LeadPoint(image.Width / 2, image.Height / 2), 0, image.Height, image.Width / 2, -1, 0, 100, 400, 0, 100, 20000, new RasterColor(255, 255, 255), new RasterColor(0, 0, 0), PlaneCommandFlags.Down | PlaneCommandFlags.Up | PlaneCommandFlags.Color);
      command.Run(image);
      codecs.Save(image, Path.Combine(LEAD_VARS.ImagesDir, "Result.jpg"), RasterImageFormat.Jpeg, 24);

   }

static class LEAD_VARS
{
   public const string ImagesDir = @"C:\Users\Public\Documents\LEADTOOLS Images";
}

Requirements

Target Platforms: Microsoft .NET Framework 2.0, Windows 2000, Windows XP, Windows Server 2003 family, Windows Server 2008 family, Windows Vista, Windows 7

See Also