Available in LEADTOOLS Medical Imaging toolkits. |
L_DicomSetDefaultSigningISCL
#include "ltdic.h"
L_LTDIC_API L_UINT32 L_DicomSetDefaultSigningISCL(hNet, SignMode)
HDICOMNET hNet; |
/* handle to an existing DICOM Network */ |
L_UINT32 SignMode; |
/* type of message authentication code */ |
Sets the current message authentication code. This function is available in the Medical Suite toolkits.
Parameter |
Description |
|
hNet |
Handle to an existing DICOM Network. This is the handle returned from the L_DicomCreateNet function. |
|
SignMode |
Flag that indicates the type of message authentication code to be used. Possible values are: |
|
|
Value |
Meaning |
|
DICOM_ISCL_MAC_NONE |
[0x00000000]No message authentication code will be used. |
|
DICOM_ISCL_MAC_MD5 |
[0x00001441]A 128 bit MD5 message authentication code is transmitted with the message. |
|
DICOM_ISCL_MAC_DESMAC |
[0x00004001]A 64 bit DESMAC authentication code is transmitted with the message. |
Returns
DICOM_SUCCESS |
The function was successful. |
DICOM_ERROR_PARAMETER |
A parameter error occurred. The message authentication code will be of type DICOM_ISCL_MAC_MD5. Refer to Return Codes. |
Comments
The message authentication code is encrypted using the current encryption mode before being sent and decrypted after being received. The current encryption mode is set using the L_DicomSetDefaultEncryptionISCL function.
The encryption mode and the message authentication code type must be the same for both the sender and the receiver.
Required DLLs and Libraries
LTDIC For a listing of the exact DLLs and Libraries needed, based on the toolkit version, refer to Files To Be Included With Your Application |
Win32, x64
See Also
Example
L_INT DicomSetDefaultSigningISCLExample(L_VOID) { L_INT nRet; HDICOMNET hNet = NULL; nRet = L_DicomStartUp(); if (nRet != DICOM_SUCCESS) return nRet; hNet = L_DicomCreateNet (TEXT(""), DICOM_SECURE_NONE); // other initialisations nRet = L_DicomSetDefaultSigningISCL(hNet, DICOM_ISCL_ENCRYPT_DESCBC); L_DicomShutDown(); return nRet; }