CombineCommand Class

Combines image data from two images (source and destination), letting you specify the areas to be combined, the operations to be performed when combining the data, and which color planes (R or G or B or R, G, and B) are used.

Object Model

Syntax

Visual Basic
C#
WinRT C#
WinRT JavaScript
C++

public class CombineCommand : Leadtools.ImageProcessing.RasterCommand, Leadtools.ImageProcessing.IRasterCommand

'Declaration
 
Public Class CombineCommand 
   Inherits Leadtools.ImageProcessing.RasterCommand
   Implements Leadtools.ImageProcessing.IRasterCommand

'Usage
 
Dim instance As CombineCommand

public sealed class CombineCommand : Leadtools.ImageProcessing.IRasterCommand

function Leadtools.ImageProcessing.Effects.CombineCommand()

public ref class CombineCommand : public Leadtools.ImageProcessing.RasterCommand, Leadtools.ImageProcessing.IRasterCommand

Remarks

For example, suppose you use the SpatialFilterCommand to apply an edge detection filter. You can then use this command to combine the resulting image with the original one to produce an image with hard edges.
This method combines the data byte-by-byte. The two images can be any color resolution. Images that are 24-bits per pixel are the easiest and fastest to combine. This command uses Windows-style coordinates (with a top-left origin) to specify the areas to be combined.
If the channel setting for one of the images is the master channel (CombineCommandFlags.SourceMaster, CombineCommandFlags.DestinationMaster, or CombineCommandFlags.ResultMaster) the settings for all the images will be set to master.
If a region is defined for either the source or destination image, or both images, the combine applies only to the intersection of regions.
For example, assume CombineCommandFlags.SourceRed is passed for the source image, CombineCommandFlags.DestinationBlue is passed for the destination image and CombineCommandFlags.ResultGreen is passed for the resulting image. In this case, the green channel of the resulting image is calculated as the result of the operations applied to the red channel of the source image and the blue channel of the destination image. The other channels of the resulting image are unchanged.
The DestinationRectangle must be defined in order to show the CombineCommand results, because the destination rectangle default values are (0, 0, 0, 0).
The output image, which is the image that contains the result of the CombineCommand, is set through the Leadtools.ImageProcessing.RasterCommand.Run(Leadtools.RasterImage) method. This image is refered to as destination image, result image, or output image.
The CombineCommand works by combining two images, the source image represented in SourceImage and the destination image, the one that the user sends through the Leadtools.ImageProcessing.RasterCommand.Run(Leadtools.RasterImage) method.
This command supports 12 and 16-bit grayscale and 48 and 64-bit color images. Support for 12 and 16-bit grayscale and 48 and 64-bit color images is available only in the Document/Medical toolkits.
This command does not support 32-bit grayscale images.
All images must be either signed or unsigned.

For more information, refer to Detecting and Enhancing Edges and Lines.
For more information, refer to Removing Noise.

Example

Visual Basic
C#
WinRT C#
WinRT JavaScript
Silverlight C#
Silverlight VB

Public Sub CombineCommandExample()
   Dim codecs As New RasterCodecs()
   codecs.ThrowExceptionsOnInvalidImages = True

   Dim leadImage As RasterImage = codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "Master.jpg"))

   ' Prepare the command
   Dim command As CombineCommand = New CombineCommand
   command.SourceImage = leadImage.Clone()
     '  the rectangle that represents the affected area of the destination image.
     command.DestinationRectangle = New LeadRect(leadImage.Width \ 8, leadImage.Height \ 8, leadImage.Width, leadImage.Height)
     '  The source point, which represents the source point of the source image which to being combining.
     command.SourcePoint = New LeadPoint(0, 0)
     '  the operations that will be performed to produce the result, and the channel that will be used to acheive this result.
     command.Flags = CombineCommandFlags.OperationAdd Or CombineCommandFlags.Destination0 Or CombineCommandFlags.SourceRed Or CombineCommandFlags.DestinationGreen Or CombineCommandFlags.ResultBlue
     command.Run(leadImage)
     codecs.Save(leadImage, Path.Combine(LEAD_VARS.ImagesDir, "Result.jpg"), RasterImageFormat.Jpeg, 24)

 End Sub

Public NotInheritable Class LEAD_VARS
   Public Const ImagesDir As String = "C:\Users\Public\Documents\LEADTOOLS Images"
End Class

public void CombineCommandExample()
   {
      // Load an image
      RasterCodecs codecs = new RasterCodecs();
      codecs.ThrowExceptionsOnInvalidImages = true;

      RasterImage image = codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "Master.jpg"));

      // Prepare the command
      CombineCommand command = new CombineCommand();
      command.SourceImage = image.Clone();
      // the rectangle that represents the affected area of the destination image.
      command.DestinationRectangle = new LeadRect(image.Width / 8, image.Height / 8, image.Width, image.Height);
      // The source point, which represents the source point of the source image which to being combining.
      command.SourcePoint = new LeadPoint(0, 0);
      // the operations that will be performed to produce the result, and the channel that will be used to acheive this result.
      command.Flags = CombineCommandFlags.OperationAdd | CombineCommandFlags.Destination0 | CombineCommandFlags.SourceRed | CombineCommandFlags.DestinationGreen | CombineCommandFlags.ResultBlue;
      command.Run(image);
      codecs.Save(image, Path.Combine(LEAD_VARS.ImagesDir, "Result.jpg"), RasterImageFormat.Jpeg, 24);

   }

static class LEAD_VARS
{
   public const string ImagesDir = @"C:\Users\Public\Documents\LEADTOOLS Images";
}

[TestMethod]
public async Task CombineCommandExample()
{
   // Load an image
   RasterCodecs codecs = new RasterCodecs();
   codecs.ThrowExceptionsOnInvalidImages = true;
   // Load the image
   string srcFileName = @"Assets\Image1.cmp";
   StorageFile loadFile = await Tools.AppInstallFolder.GetFileAsync(srcFileName);
   RasterImage image = await codecs.LoadAsync(LeadStreamFactory.Create(loadFile));

   // Prepare the command
   CombineCommand command = new CombineCommand();
   command.SourceImage = image.Clone();
   // the rectangle that represents the affected area of the destination image.
   command.DestinationRectangle = LeadRectHelper.Create(image.Width / 8, image.Height / 8, image.Width, image.Height);
   // The source point, which represents the source point of the source image which to being combining.
   command.SourcePoint = LeadPointHelper.Create(0, 0);
   // the operations that will be performed to produce the result, and the channel that will be used to acheive this result.
   command.Flags = CombineCommandFlags.OperationAdd | CombineCommandFlags.Destination0 | CombineCommandFlags.SourceRed | CombineCommandFlags.DestinationGreen | CombineCommandFlags.ResultBlue;
   command.Run(image);
   //Save as BMP
   string destFileName = @"result.bmp";
   StorageFile saveFile = await Tools.AppLocalFolder.CreateFileAsync(destFileName);
   await codecs.SaveAsync(image, LeadStreamFactory.Create(saveFile), RasterImageFormat.Bmp, 24);

}

public void CombineCommandExample(RasterImage image, Stream outStream)
{
   // Prepare the command
   CombineCommand command = new CombineCommand();
   command.SourceImage = image.Clone();
   command.DestinationRectangle = new LeadRect(image.Width / 8, image.Height / 8, image.Width, image.Height);
   command.SourcePoint = new LeadPoint(0, 0);
   command.Flags = CombineCommandFlags.OperationAdd | CombineCommandFlags.Destination0 | CombineCommandFlags.SourceRed | CombineCommandFlags.DestinationGreen | CombineCommandFlags.ResultBlue;
   command.Run(image);
   // Save result image
   RasterCodecs codecs = new RasterCodecs();
   codecs.Save(image, outStream, RasterImageFormat.Jpeg, 24);
   image.Dispose();
}

Public Sub CombineCommandExample(ByVal image As RasterImage, ByVal outStream As Stream)
   ' Prepare the command
   Dim command As CombineCommand = New CombineCommand()
   command.SourceImage = image.Clone()
   command.DestinationRectangle = New LeadRect(image.Width / 8, image.Height / 8, image.Width, image.Height)
   command.SourcePoint = New LeadPoint(0, 0)
   command.Flags = CombineCommandFlags.OperationAdd Or CombineCommandFlags.Destination0 Or CombineCommandFlags.SourceRed Or CombineCommandFlags.DestinationGreen _
      Or CombineCommandFlags.ResultBlue
   command.Run(image)
   ' Save result image
   Dim codecs As RasterCodecs = New RasterCodecs()
   codecs.Save(image, outStream, RasterImageFormat.Jpeg, 24)
   image.Dispose()
End Sub

Requirements

Target Platforms: Windows 7, Windows Vista SP1 or later, Windows XP SP3, Windows Server 2008 (Server Core not supported), Windows Server 2008 R2 (Server Core supported with SP1 or later), Windows Server 2003 SP2

Reference