Represents the class that is used to create or adjust the oblique cut plane.
Imports Leadtools
Imports Leadtools.Dicom
Imports Leadtools.Medical3D
Imports Leadtools.Codecs
Imports Leadtools.MedicalViewer
Imports Leadtools.Annotations
Imports Leadtools.ImageProcessing.Core
Private Class MedicalViewerCutLineForm : Inherits Form
Private _medicalViewer As MedicalViewer
Private _seriesManager As MedicalViewerSeriesManager
Private Sub MedicalViewerCutLineForm_SizeChanged(ByVal sender As Object, ByVal e As EventArgs)
_medicalViewer.Size = New Size(Me.ClientRectangle.Right, Me.ClientRectangle.Bottom)
End Sub
Public Sub New(ByVal output As MedicalViewerSeriesManager)
Dim _codecs As RasterCodecs = New RasterCodecs()
AddHandler SizeChanged, AddressOf MedicalViewerCutLineForm_SizeChanged
' Create the medical viewer and adjust the size and the location.
_medicalViewer = New MedicalViewer(1, 2)
_medicalViewer.Location = New Point(0, 0)
_medicalViewer.Size = New Size(Me.ClientRectangle.Right, Me.ClientRectangle.Bottom)
_seriesManager = output
Dim cell As MedicalViewerMultiCell = New MedicalViewerMultiCell(Nothing, True, 1, 1)
Dim index As Integer
Dim count As Integer = output.Stacks(0).Items.Count
Dim codecsInformation As CodecsImageInfo
' Get the image information for each frame and send them to the low memory usage function.
Dim imageInformation As MedicalViewerImageInformation() = New MedicalViewerImageInformation(count - 1) {}
index = 0
Do While index < count
codecsInformation = _codecs.GetInformation(CStr(output.Stacks(0).Items(index).Data), True)
imageInformation(index) = New MedicalViewerImageInformation()
imageInformation(index).ImageHeight = codecsInformation.Width
imageInformation(index).ImageWidth = codecsInformation.Width
imageInformation(index).XResolution = codecsInformation.XResolution
imageInformation(index).YResolution = codecsInformation.YResolution
index += 1
Loop
AddHandler cell.Data3DRequested, AddressOf cell_Data3DRequested
AddHandler cell.Data3DFrameRequested, AddressOf cell_Data3DFrameRequested
AddHandler cell.FramesRequested, AddressOf cell_FramesRequested
AddHandler FormClosing, AddressOf MedicalViewerCutLineForm_FormClosing
cell.EnableLowMemoryUsage(2, count, imageInformation)
_medicalViewer.Cells.Add(cell)
cell.PixelSpacing = output.Stacks(0).PixelSpacing
index = 0
Do While index < count
cell.SetImagePosition(index, output.Stacks(0).Items(index).ImagePosition, (index = count - 1))
index += 1
Loop
' add some actions that will be used to change the properties of the images inside the control.
cell.AddAction(MedicalViewerActionType.WindowLevel)
cell.AddAction(MedicalViewerActionType.Alpha)
cell.AddAction(MedicalViewerActionType.Offset)
' assign the added actions to a mouse button, meaning that when the user clicks and drags the mouse button, the associated action will be activated.
cell.SetAction(MedicalViewerActionType.WindowLevel, MedicalViewerMouseButtons.Left, MedicalViewerActionFlags.Active)
cell.SetAction(MedicalViewerActionType.Alpha, MedicalViewerMouseButtons.Middle, MedicalViewerActionFlags.Active)
cell.SetAction(MedicalViewerActionType.Offset, MedicalViewerMouseButtons.Right, MedicalViewerActionFlags.Active)
' adjust some properties of the cell and add some tags.
_medicalViewer.Cells(0).SetTag(2, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.UserData, "EX. ID 230-36-5448")
_medicalViewer.Cells(0).SetTag(4, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Frame)
_medicalViewer.Cells(0).SetTag(6, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Scale)
_medicalViewer.Cells(0).SetTag(2, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.WindowLevelData)
_medicalViewer.Cells(0).SetTag(1, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.FieldOfView)
' Set the image DICOM data
cell.PixelSpacing = output.Stacks(0).PixelSpacing
' Create some cells that will hold the derivative images resulted from the cut-planes.
Dim singleDerivativeCell As MedicalViewerCell = New MedicalViewerCell()
Dim firstDerivativeCell As MedicalViewerCell = New MedicalViewerCell()
Dim secondDerivativeCell As MedicalViewerCell = New MedicalViewerCell()
AddHandler cell.DerivativeGenerated, AddressOf cell_DerivativeGenerated
' create a single cut-plane and double cut-plane.
cell.ReferenceLine.CutLines.Add(New MedicalViewerPlaneCutLine(singleDerivativeCell))
cell.ReferenceLine.DoubleCutLines.Add(New MedicalViewerDoublePlaneCutLine(firstDerivativeCell, secondDerivativeCell))
_medicalViewer.Cells.Add(singleDerivativeCell)
_medicalViewer.Cells.Add(firstDerivativeCell)
_medicalViewer.Cells.Add(secondDerivativeCell)
Controls.Add(_medicalViewer)
_medicalViewer.Dock = DockStyle.Fill
End Sub
Private Sub MedicalViewerCutLineForm_FormClosing(ByVal sender As Object, ByVal e As FormClosingEventArgs)
End Sub
Private Sub cell_Data3DRequested(ByVal sender As Object, ByVal e As MedicalViewerData3DRequestedEventArgs)
e.Succeed = Medical3DEngine.Provide3DInformation(e)
End Sub
Private Sub cell_Data3DFrameRequested(ByVal sender As Object, ByVal e As MedicalViewer3DFrameRequestedEventArgs)
Dim _codecs As RasterCodecs = New RasterCodecs()
e.Image = _codecs.Load(CStr(_seriesManager.Stacks(0).Items(e.ImageIndex).Data))
_codecs.Dispose()
End Sub
Private Sub cell_DerivativeGenerated(ByVal sender As Object, ByVal e As MedicalViewerDerivativeGeneratedEventArgs)
e.DerivativeCell.ShowCellBoundaries = True
e.DerivativeCell.ReferenceLine.Enabled = True
End Sub
Private Sub cell_FramesRequested(ByVal sender As Object, ByVal e As MedicalViewerRequestedFramesInformationEventArgs)
Dim cell As MedicalViewerMultiCell = CType(sender, MedicalViewerMultiCell)
Dim _codecs As RasterCodecs = New RasterCodecs()
Dim i As Integer
Dim image As RasterImage
Dim fileName As String
If e.RequestedFramesIndexes.Length > 0 Then
fileName = CStr(_seriesManager.Stacks(0).Items(e.RequestedFramesIndexes(0)).Data)
image = _codecs.Load(fileName)
Else
Return
End If
i = 1
Do While i < e.RequestedFramesIndexes.Length
fileName = CStr(_seriesManager.Stacks(0).Items(e.RequestedFramesIndexes(i)).Data)
image.AddPage(_codecs.Load(fileName))
i += 1
Loop
cell.SetRequestedImage(image, e.RequestedFramesIndexes, MedicalViewerSetImageOptions.Insert)
End Sub
Public ReadOnly Property Viewer() As MedicalViewer
Get
Return _medicalViewer
End Get
End Property
End Class
Private Function GetMedicalViewerCutLineControl() As MedicalViewerCutLineForm
Dim form As MedicalViewerSeriesManagerFrom = New MedicalViewerSeriesManagerFrom()
Dim output As MedicalViewerSeriesManager = form.LoadJamesHead()
Return New MedicalViewerCutLineForm(output)
End Function
' This example changes the default window level value by decrease the width by 100. Then resets the images based on the new value.
Public Sub MedicalViewerCutLineExample()
Dim myForm As MedicalViewerCutLineForm = GetMedicalViewerCutLineControl()
Dim medicalViewer As MedicalViewer = myForm.Viewer
myForm.ShowDialog()
End Sub using Leadtools;
using Leadtools.Dicom;
using Leadtools.Medical3D;
using Leadtools.Codecs;
using Leadtools.MedicalViewer;
using Leadtools.ImageProcessing;
using Leadtools.ImageProcessing.Core;
using Leadtools.ImageProcessing.Color;
using Leadtools.Annotations;
class MedicalViewerCutLineForm : Form
{
private MedicalViewer _medicalViewer;
private MedicalViewerSeriesManager _seriesManager;
void MedicalViewerCutLineForm_SizeChanged(object sender, EventArgs e)
{
_medicalViewer.Size = new Size(this.ClientRectangle.Right, this.ClientRectangle.Bottom);
}
public MedicalViewerCutLineForm(MedicalViewerSeriesManager output)
{
RasterCodecs _codecs = new RasterCodecs();
this.SizeChanged += new EventHandler(MedicalViewerCutLineForm_SizeChanged);
// Create the medical viewer and adjust the size and the location.
_medicalViewer = new MedicalViewer(1, 2);
_medicalViewer.Location = new Point(0, 0);
_medicalViewer.Size = new Size(this.ClientRectangle.Right, this.ClientRectangle.Bottom);
_seriesManager = output;
MedicalViewerMultiCell cell = new MedicalViewerMultiCell(null, true, 1, 1);
int index;
int count = output.Stacks[0].Items.Count;
CodecsImageInfo codecsInformation;
// Get the image information for each frame and send them to the low memory usage function.
MedicalViewerImageInformation[] imageInformation = new MedicalViewerImageInformation[count];
for (index = 0; index < count; index++)
{
codecsInformation = _codecs.GetInformation((string)(output.Stacks[0].Items[index].Data), true);
imageInformation[index] = new MedicalViewerImageInformation();
imageInformation[index].ImageHeight = codecsInformation.Width;
imageInformation[index].ImageWidth = codecsInformation.Width;
imageInformation[index].XResolution = codecsInformation.XResolution;
imageInformation[index].YResolution = codecsInformation.YResolution;
}
cell.Data3DRequested += new EventHandler<MedicalViewerData3DRequestedEventArgs>(cell_Data3DRequested);
cell.Data3DFrameRequested += new EventHandler<MedicalViewer3DFrameRequestedEventArgs>(cell_Data3DFrameRequested);
cell.FramesRequested +=new EventHandler<MedicalViewerRequestedFramesInformationEventArgs>(cell_FramesRequested);
FormClosing += new FormClosingEventHandler(MedicalViewerCutLineForm_FormClosing);
cell.EnableLowMemoryUsage(2, count, imageInformation);
_medicalViewer.Cells.Add(cell);
cell.PixelSpacing = output.Stacks[0].PixelSpacing;
for (index = 0; index < count; index++)
{
cell.SetImagePosition(index, output.Stacks[0].Items[index].ImagePosition, (index == count - 1));
}
// add some actions that will be used to change the properties of the images inside the control.
cell.AddAction(MedicalViewerActionType.WindowLevel);
cell.AddAction(MedicalViewerActionType.Alpha);
cell.AddAction(MedicalViewerActionType.Offset);
// assign the added actions to a mouse button, meaning that when the user clicks and drags the mouse button, the associated action will be activated.
cell.SetAction(MedicalViewerActionType.WindowLevel, MedicalViewerMouseButtons.Left, MedicalViewerActionFlags.Active);
cell.SetAction(MedicalViewerActionType.Alpha, MedicalViewerMouseButtons.Middle, MedicalViewerActionFlags.Active);
cell.SetAction(MedicalViewerActionType.Offset, MedicalViewerMouseButtons.Right, MedicalViewerActionFlags.Active);
// adjust some properties of the cell and add some tags.
_medicalViewer.Cells[0].SetTag(2, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.UserData, "EX. ID 230-36-5448");
_medicalViewer.Cells[0].SetTag(4, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Frame);
_medicalViewer.Cells[0].SetTag(6, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Scale);
_medicalViewer.Cells[0].SetTag(2, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.WindowLevelData);
_medicalViewer.Cells[0].SetTag(1, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.FieldOfView);
// Set the image DICOM data
cell.PixelSpacing = output.Stacks[0].PixelSpacing;
// Create some cells that will hold the derivative images resulted from the cut-planes.
MedicalViewerCell singleDerivativeCell = new MedicalViewerCell();
MedicalViewerCell firstDerivativeCell = new MedicalViewerCell();
MedicalViewerCell secondDerivativeCell = new MedicalViewerCell();
cell.DerivativeGenerated +=new EventHandler<MedicalViewerDerivativeGeneratedEventArgs>(cell_DerivativeGenerated);
// create a single cut-plane and double cut-plane.
cell.ReferenceLine.CutLines.Add(new MedicalViewerPlaneCutLine(singleDerivativeCell));
cell.ReferenceLine.DoubleCutLines.Add(new MedicalViewerDoublePlaneCutLine(firstDerivativeCell, secondDerivativeCell));
_medicalViewer.Cells.Add(singleDerivativeCell);
_medicalViewer.Cells.Add(firstDerivativeCell);
_medicalViewer.Cells.Add(secondDerivativeCell);
Controls.Add(_medicalViewer);
_medicalViewer.Dock = DockStyle.Fill;
}
void MedicalViewerCutLineForm_FormClosing(object sender, FormClosingEventArgs e)
{
}
void cell_Data3DRequested(object sender, MedicalViewerData3DRequestedEventArgs e)
{
e.Succeed = Medical3DEngine.Provide3DInformation(e);
}
void cell_Data3DFrameRequested(object sender, MedicalViewer3DFrameRequestedEventArgs e)
{
RasterCodecs _codecs = new RasterCodecs();
e.Image = _codecs.Load((string)(_seriesManager.Stacks[0].Items[e.ImageIndex].Data));
_codecs.Dispose();
}
void cell_DerivativeGenerated(object sender, MedicalViewerDerivativeGeneratedEventArgs e)
{
e.DerivativeCell.ShowCellBoundaries = true;
e.DerivativeCell.ReferenceLine.Enabled = true;
}
void cell_FramesRequested(object sender, MedicalViewerRequestedFramesInformationEventArgs e)
{
MedicalViewerMultiCell cell = (MedicalViewerMultiCell)(sender);
RasterCodecs _codecs = new RasterCodecs();
int i;
RasterImage image;
string fileName;
if (e.RequestedFramesIndexes.Length > 0)
{
fileName = (string)(_seriesManager.Stacks[0].Items[e.RequestedFramesIndexes[0]].Data);
image = _codecs.Load(fileName);
}
else
return;
for (i = 1; i < e.RequestedFramesIndexes.Length; i++)
{
fileName = (string)(_seriesManager.Stacks[0].Items[e.RequestedFramesIndexes[i]].Data);
image.AddPage(_codecs.Load(fileName));
}
cell.SetRequestedImage(image, e.RequestedFramesIndexes, MedicalViewerSetImageOptions.Insert);
}
public MedicalViewer Viewer
{
get { return _medicalViewer; }
}
}
MedicalViewerCutLineForm GetMedicalViewerCutLineControl()
{
MedicalViewerSeriesManagerFrom form = new MedicalViewerSeriesManagerFrom();
MedicalViewerSeriesManager output = form.LoadJamesHead();
return new MedicalViewerCutLineForm(output);
}
// This example changes the default window level value by decrease the width by 100. Then resets the images based on the new value.
public void MedicalViewerCutLineExample()
{
MedicalViewerCutLineForm myForm = GetMedicalViewerCutLineControl();
MedicalViewer medicalViewer = myForm.Viewer;
myForm.ShowDialog();
}
Imports Leadtools
Imports Leadtools.Dicom
Imports Leadtools.Medical3D
Imports Leadtools.Codecs
Imports Leadtools.MedicalViewer
Imports Leadtools.Annotations
Imports Leadtools.ImageProcessing.Core
Private Class MedicalViewerCutLineForm : Inherits Form
Private _medicalViewer As MedicalViewer
Private _seriesManager As MedicalViewerSeriesManager
Private Sub MedicalViewerCutLineForm_SizeChanged(ByVal sender As Object, ByVal e As EventArgs)
_medicalViewer.Size = New Size(Me.ClientRectangle.Right, Me.ClientRectangle.Bottom)
End Sub
Public Sub New(ByVal output As MedicalViewerSeriesManager)
Dim _codecs As RasterCodecs = New RasterCodecs()
AddHandler SizeChanged, AddressOf MedicalViewerCutLineForm_SizeChanged
' Create the medical viewer and adjust the size and the location.
_medicalViewer = New MedicalViewer(1, 2)
_medicalViewer.Location = New Point(0, 0)
_medicalViewer.Size = New Size(Me.ClientRectangle.Right, Me.ClientRectangle.Bottom)
_seriesManager = output
Dim cell As MedicalViewerMultiCell = New MedicalViewerMultiCell(Nothing, True, 1, 1)
Dim index As Integer
Dim count As Integer = output.Stacks(0).Items.Count
Dim codecsInformation As CodecsImageInfo
' Get the image information for each frame and send them to the low memory usage function.
Dim imageInformation As MedicalViewerImageInformation() = New MedicalViewerImageInformation(count - 1) {}
index = 0
Do While index < count
codecsInformation = _codecs.GetInformation(CStr(output.Stacks(0).Items(index).Data), True)
imageInformation(index) = New MedicalViewerImageInformation()
imageInformation(index).ImageHeight = codecsInformation.Width
imageInformation(index).ImageWidth = codecsInformation.Width
imageInformation(index).XResolution = codecsInformation.XResolution
imageInformation(index).YResolution = codecsInformation.YResolution
index += 1
Loop
AddHandler cell.Data3DRequested, AddressOf cell_Data3DRequested
AddHandler cell.Data3DFrameRequested, AddressOf cell_Data3DFrameRequested
AddHandler cell.FramesRequested, AddressOf cell_FramesRequested
AddHandler FormClosing, AddressOf MedicalViewerCutLineForm_FormClosing
cell.EnableLowMemoryUsage(2, count, imageInformation)
_medicalViewer.Cells.Add(cell)
cell.PixelSpacing = output.Stacks(0).PixelSpacing
index = 0
Do While index < count
cell.SetImagePosition(index, output.Stacks(0).Items(index).ImagePosition, (index = count - 1))
index += 1
Loop
' add some actions that will be used to change the properties of the images inside the control.
cell.AddAction(MedicalViewerActionType.WindowLevel)
cell.AddAction(MedicalViewerActionType.Alpha)
cell.AddAction(MedicalViewerActionType.Offset)
' assign the added actions to a mouse button, meaning that when the user clicks and drags the mouse button, the associated action will be activated.
cell.SetAction(MedicalViewerActionType.WindowLevel, MedicalViewerMouseButtons.Left, MedicalViewerActionFlags.Active)
cell.SetAction(MedicalViewerActionType.Alpha, MedicalViewerMouseButtons.Middle, MedicalViewerActionFlags.Active)
cell.SetAction(MedicalViewerActionType.Offset, MedicalViewerMouseButtons.Right, MedicalViewerActionFlags.Active)
' adjust some properties of the cell and add some tags.
_medicalViewer.Cells(0).SetTag(2, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.UserData, "EX. ID 230-36-5448")
_medicalViewer.Cells(0).SetTag(4, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Frame)
_medicalViewer.Cells(0).SetTag(6, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Scale)
_medicalViewer.Cells(0).SetTag(2, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.WindowLevelData)
_medicalViewer.Cells(0).SetTag(1, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.FieldOfView)
' Set the image DICOM data
cell.PixelSpacing = output.Stacks(0).PixelSpacing
' Create some cells that will hold the derivative images resulted from the cut-planes.
Dim singleDerivativeCell As MedicalViewerCell = New MedicalViewerCell()
Dim firstDerivativeCell As MedicalViewerCell = New MedicalViewerCell()
Dim secondDerivativeCell As MedicalViewerCell = New MedicalViewerCell()
AddHandler cell.DerivativeGenerated, AddressOf cell_DerivativeGenerated
' create a single cut-plane and double cut-plane.
cell.ReferenceLine.CutLines.Add(New MedicalViewerPlaneCutLine(singleDerivativeCell))
cell.ReferenceLine.DoubleCutLines.Add(New MedicalViewerDoublePlaneCutLine(firstDerivativeCell, secondDerivativeCell))
_medicalViewer.Cells.Add(singleDerivativeCell)
_medicalViewer.Cells.Add(firstDerivativeCell)
_medicalViewer.Cells.Add(secondDerivativeCell)
Controls.Add(_medicalViewer)
_medicalViewer.Dock = DockStyle.Fill
End Sub
Private Sub MedicalViewerCutLineForm_FormClosing(ByVal sender As Object, ByVal e As FormClosingEventArgs)
End Sub
Private Sub cell_Data3DRequested(ByVal sender As Object, ByVal e As MedicalViewerData3DRequestedEventArgs)
e.Succeed = Medical3DEngine.Provide3DInformation(e)
End Sub
Private Sub cell_Data3DFrameRequested(ByVal sender As Object, ByVal e As MedicalViewer3DFrameRequestedEventArgs)
Dim _codecs As RasterCodecs = New RasterCodecs()
e.Image = _codecs.Load(CStr(_seriesManager.Stacks(0).Items(e.ImageIndex).Data))
_codecs.Dispose()
End Sub
Private Sub cell_DerivativeGenerated(ByVal sender As Object, ByVal e As MedicalViewerDerivativeGeneratedEventArgs)
e.DerivativeCell.ShowCellBoundaries = True
e.DerivativeCell.ReferenceLine.Enabled = True
End Sub
Private Sub cell_FramesRequested(ByVal sender As Object, ByVal e As MedicalViewerRequestedFramesInformationEventArgs)
Dim cell As MedicalViewerMultiCell = CType(sender, MedicalViewerMultiCell)
Dim _codecs As RasterCodecs = New RasterCodecs()
Dim i As Integer
Dim image As RasterImage
Dim fileName As String
If e.RequestedFramesIndexes.Length > 0 Then
fileName = CStr(_seriesManager.Stacks(0).Items(e.RequestedFramesIndexes(0)).Data)
image = _codecs.Load(fileName)
Else
Return
End If
i = 1
Do While i < e.RequestedFramesIndexes.Length
fileName = CStr(_seriesManager.Stacks(0).Items(e.RequestedFramesIndexes(i)).Data)
image.AddPage(_codecs.Load(fileName))
i += 1
Loop
cell.SetRequestedImage(image, e.RequestedFramesIndexes, MedicalViewerSetImageOptions.Insert)
End Sub
Public ReadOnly Property Viewer() As MedicalViewer
Get
Return _medicalViewer
End Get
End Property
End Class
Private Function GetMedicalViewerCutLineControl() As MedicalViewerCutLineForm
Dim form As MedicalViewerSeriesManagerFrom = New MedicalViewerSeriesManagerFrom()
Dim output As MedicalViewerSeriesManager = form.LoadJamesHead()
Return New MedicalViewerCutLineForm(output)
End Function
' This example changes the default window level value by decrease the width by 100. Then resets the images based on the new value.
Public Sub MedicalViewerCutLineExample()
Dim myForm As MedicalViewerCutLineForm = GetMedicalViewerCutLineControl()
Dim medicalViewer As MedicalViewer = myForm.Viewer
myForm.ShowDialog()
End Sub using Leadtools;
using Leadtools.Dicom;
using Leadtools.Medical3D;
using Leadtools.Codecs;
using Leadtools.MedicalViewer;
using Leadtools.ImageProcessing;
using Leadtools.ImageProcessing.Core;
using Leadtools.ImageProcessing.Color;
using Leadtools.Annotations;
class MedicalViewerCutLineForm : Form
{
private MedicalViewer _medicalViewer;
private MedicalViewerSeriesManager _seriesManager;
void MedicalViewerCutLineForm_SizeChanged(object sender, EventArgs e)
{
_medicalViewer.Size = new Size(this.ClientRectangle.Right, this.ClientRectangle.Bottom);
}
public MedicalViewerCutLineForm(MedicalViewerSeriesManager output)
{
RasterCodecs _codecs = new RasterCodecs();
this.SizeChanged += new EventHandler(MedicalViewerCutLineForm_SizeChanged);
// Create the medical viewer and adjust the size and the location.
_medicalViewer = new MedicalViewer(1, 2);
_medicalViewer.Location = new Point(0, 0);
_medicalViewer.Size = new Size(this.ClientRectangle.Right, this.ClientRectangle.Bottom);
_seriesManager = output;
MedicalViewerMultiCell cell = new MedicalViewerMultiCell(null, true, 1, 1);
int index;
int count = output.Stacks[0].Items.Count;
CodecsImageInfo codecsInformation;
// Get the image information for each frame and send them to the low memory usage function.
MedicalViewerImageInformation[] imageInformation = new MedicalViewerImageInformation[count];
for (index = 0; index < count; index++)
{
codecsInformation = _codecs.GetInformation((string)(output.Stacks[0].Items[index].Data), true);
imageInformation[index] = new MedicalViewerImageInformation();
imageInformation[index].ImageHeight = codecsInformation.Width;
imageInformation[index].ImageWidth = codecsInformation.Width;
imageInformation[index].XResolution = codecsInformation.XResolution;
imageInformation[index].YResolution = codecsInformation.YResolution;
}
cell.Data3DRequested += new EventHandler<MedicalViewerData3DRequestedEventArgs>(cell_Data3DRequested);
cell.Data3DFrameRequested += new EventHandler<MedicalViewer3DFrameRequestedEventArgs>(cell_Data3DFrameRequested);
cell.FramesRequested +=new EventHandler<MedicalViewerRequestedFramesInformationEventArgs>(cell_FramesRequested);
FormClosing += new FormClosingEventHandler(MedicalViewerCutLineForm_FormClosing);
cell.EnableLowMemoryUsage(2, count, imageInformation);
_medicalViewer.Cells.Add(cell);
cell.PixelSpacing = output.Stacks[0].PixelSpacing;
for (index = 0; index < count; index++)
{
cell.SetImagePosition(index, output.Stacks[0].Items[index].ImagePosition, (index == count - 1));
}
// add some actions that will be used to change the properties of the images inside the control.
cell.AddAction(MedicalViewerActionType.WindowLevel);
cell.AddAction(MedicalViewerActionType.Alpha);
cell.AddAction(MedicalViewerActionType.Offset);
// assign the added actions to a mouse button, meaning that when the user clicks and drags the mouse button, the associated action will be activated.
cell.SetAction(MedicalViewerActionType.WindowLevel, MedicalViewerMouseButtons.Left, MedicalViewerActionFlags.Active);
cell.SetAction(MedicalViewerActionType.Alpha, MedicalViewerMouseButtons.Middle, MedicalViewerActionFlags.Active);
cell.SetAction(MedicalViewerActionType.Offset, MedicalViewerMouseButtons.Right, MedicalViewerActionFlags.Active);
// adjust some properties of the cell and add some tags.
_medicalViewer.Cells[0].SetTag(2, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.UserData, "EX. ID 230-36-5448");
_medicalViewer.Cells[0].SetTag(4, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Frame);
_medicalViewer.Cells[0].SetTag(6, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Scale);
_medicalViewer.Cells[0].SetTag(2, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.WindowLevelData);
_medicalViewer.Cells[0].SetTag(1, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.FieldOfView);
// Set the image DICOM data
cell.PixelSpacing = output.Stacks[0].PixelSpacing;
// Create some cells that will hold the derivative images resulted from the cut-planes.
MedicalViewerCell singleDerivativeCell = new MedicalViewerCell();
MedicalViewerCell firstDerivativeCell = new MedicalViewerCell();
MedicalViewerCell secondDerivativeCell = new MedicalViewerCell();
cell.DerivativeGenerated +=new EventHandler<MedicalViewerDerivativeGeneratedEventArgs>(cell_DerivativeGenerated);
// create a single cut-plane and double cut-plane.
cell.ReferenceLine.CutLines.Add(new MedicalViewerPlaneCutLine(singleDerivativeCell));
cell.ReferenceLine.DoubleCutLines.Add(new MedicalViewerDoublePlaneCutLine(firstDerivativeCell, secondDerivativeCell));
_medicalViewer.Cells.Add(singleDerivativeCell);
_medicalViewer.Cells.Add(firstDerivativeCell);
_medicalViewer.Cells.Add(secondDerivativeCell);
Controls.Add(_medicalViewer);
_medicalViewer.Dock = DockStyle.Fill;
}
void MedicalViewerCutLineForm_FormClosing(object sender, FormClosingEventArgs e)
{
}
void cell_Data3DRequested(object sender, MedicalViewerData3DRequestedEventArgs e)
{
e.Succeed = Medical3DEngine.Provide3DInformation(e);
}
void cell_Data3DFrameRequested(object sender, MedicalViewer3DFrameRequestedEventArgs e)
{
RasterCodecs _codecs = new RasterCodecs();
e.Image = _codecs.Load((string)(_seriesManager.Stacks[0].Items[e.ImageIndex].Data));
_codecs.Dispose();
}
void cell_DerivativeGenerated(object sender, MedicalViewerDerivativeGeneratedEventArgs e)
{
e.DerivativeCell.ShowCellBoundaries = true;
e.DerivativeCell.ReferenceLine.Enabled = true;
}
void cell_FramesRequested(object sender, MedicalViewerRequestedFramesInformationEventArgs e)
{
MedicalViewerMultiCell cell = (MedicalViewerMultiCell)(sender);
RasterCodecs _codecs = new RasterCodecs();
int i;
RasterImage image;
string fileName;
if (e.RequestedFramesIndexes.Length > 0)
{
fileName = (string)(_seriesManager.Stacks[0].Items[e.RequestedFramesIndexes[0]].Data);
image = _codecs.Load(fileName);
}
else
return;
for (i = 1; i < e.RequestedFramesIndexes.Length; i++)
{
fileName = (string)(_seriesManager.Stacks[0].Items[e.RequestedFramesIndexes[i]].Data);
image.AddPage(_codecs.Load(fileName));
}
cell.SetRequestedImage(image, e.RequestedFramesIndexes, MedicalViewerSetImageOptions.Insert);
}
public MedicalViewer Viewer
{
get { return _medicalViewer; }
}
}
MedicalViewerCutLineForm GetMedicalViewerCutLineControl()
{
MedicalViewerSeriesManagerFrom form = new MedicalViewerSeriesManagerFrom();
MedicalViewerSeriesManager output = form.LoadJamesHead();
return new MedicalViewerCutLineForm(output);
}
// This example changes the default window level value by decrease the width by 100. Then resets the images based on the new value.
public void MedicalViewerCutLineExample()
{
MedicalViewerCutLineForm myForm = GetMedicalViewerCutLineControl();
MedicalViewer medicalViewer = myForm.Viewer;
myForm.ShowDialog();
}
using Leadtools;
using Leadtools.Dicom;
using Leadtools.Medical3D;
using Leadtools.Codecs;
using Leadtools.MedicalViewer;
using Leadtools.ImageProcessing;
using Leadtools.ImageProcessing.Core;
using Leadtools.ImageProcessing.Color;
using Leadtools.Annotations;
class MedicalViewerCutLineForm : Form
{
private MedicalViewer _medicalViewer;
private MedicalViewerSeriesManager _seriesManager;
void MedicalViewerCutLineForm_SizeChanged(object sender, EventArgs e)
{
_medicalViewer.Size = new Size(this.ClientRectangle.Right, this.ClientRectangle.Bottom);
}
public MedicalViewerCutLineForm(MedicalViewerSeriesManager output)
{
RasterCodecs _codecs = new RasterCodecs();
this.SizeChanged += new EventHandler(MedicalViewerCutLineForm_SizeChanged);
// Create the medical viewer and adjust the size and the location.
_medicalViewer = new MedicalViewer(1, 2);
_medicalViewer.Location = new Point(0, 0);
_medicalViewer.Size = new Size(this.ClientRectangle.Right, this.ClientRectangle.Bottom);
_seriesManager = output;
MedicalViewerMultiCell cell = new MedicalViewerMultiCell(null, true, 1, 1);
int index;
int count = output.Stacks[0].Items.Count;
CodecsImageInfo codecsInformation;
// Get the image information for each frame and send them to the low memory usage function.
MedicalViewerImageInformation[] imageInformation = new MedicalViewerImageInformation[count];
for (index = 0; index < count; index++)
{
codecsInformation = _codecs.GetInformation((string)(output.Stacks[0].Items[index].Data), true);
imageInformation[index] = new MedicalViewerImageInformation();
imageInformation[index].ImageHeight = codecsInformation.Width;
imageInformation[index].ImageWidth = codecsInformation.Width;
imageInformation[index].XResolution = codecsInformation.XResolution;
imageInformation[index].YResolution = codecsInformation.YResolution;
}
cell.Data3DRequested += new EventHandler<MedicalViewerData3DRequestedEventArgs>(cell_Data3DRequested);
cell.Data3DFrameRequested += new EventHandler<MedicalViewer3DFrameRequestedEventArgs>(cell_Data3DFrameRequested);
cell.FramesRequested +=new EventHandler<MedicalViewerRequestedFramesInformationEventArgs>(cell_FramesRequested);
FormClosing += new FormClosingEventHandler(MedicalViewerCutLineForm_FormClosing);
cell.EnableLowMemoryUsage(2, count, imageInformation);
_medicalViewer.Cells.Add(cell);
cell.PixelSpacing = output.Stacks[0].PixelSpacing;
for (index = 0; index < count; index++)
{
cell.SetImagePosition(index, output.Stacks[0].Items[index].ImagePosition, (index == count - 1));
}
// add some actions that will be used to change the properties of the images inside the control.
cell.AddAction(MedicalViewerActionType.WindowLevel);
cell.AddAction(MedicalViewerActionType.Alpha);
cell.AddAction(MedicalViewerActionType.Offset);
// assign the added actions to a mouse button, meaning that when the user clicks and drags the mouse button, the associated action will be activated.
cell.SetAction(MedicalViewerActionType.WindowLevel, MedicalViewerMouseButtons.Left, MedicalViewerActionFlags.Active);
cell.SetAction(MedicalViewerActionType.Alpha, MedicalViewerMouseButtons.Middle, MedicalViewerActionFlags.Active);
cell.SetAction(MedicalViewerActionType.Offset, MedicalViewerMouseButtons.Right, MedicalViewerActionFlags.Active);
// adjust some properties of the cell and add some tags.
_medicalViewer.Cells[0].SetTag(2, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.UserData, "EX. ID 230-36-5448");
_medicalViewer.Cells[0].SetTag(4, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Frame);
_medicalViewer.Cells[0].SetTag(6, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Scale);
_medicalViewer.Cells[0].SetTag(2, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.WindowLevelData);
_medicalViewer.Cells[0].SetTag(1, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.FieldOfView);
// Set the image DICOM data
cell.PixelSpacing = output.Stacks[0].PixelSpacing;
// Create some cells that will hold the derivative images resulted from the cut-planes.
MedicalViewerCell singleDerivativeCell = new MedicalViewerCell();
MedicalViewerCell firstDerivativeCell = new MedicalViewerCell();
MedicalViewerCell secondDerivativeCell = new MedicalViewerCell();
cell.DerivativeGenerated +=new EventHandler<MedicalViewerDerivativeGeneratedEventArgs>(cell_DerivativeGenerated);
// create a single cut-plane and double cut-plane.
cell.ReferenceLine.CutLines.Add(new MedicalViewerPlaneCutLine(singleDerivativeCell));
cell.ReferenceLine.DoubleCutLines.Add(new MedicalViewerDoublePlaneCutLine(firstDerivativeCell, secondDerivativeCell));
_medicalViewer.Cells.Add(singleDerivativeCell);
_medicalViewer.Cells.Add(firstDerivativeCell);
_medicalViewer.Cells.Add(secondDerivativeCell);
Controls.Add(_medicalViewer);
_medicalViewer.Dock = DockStyle.Fill;
}
void MedicalViewerCutLineForm_FormClosing(object sender, FormClosingEventArgs e)
{
}
void cell_Data3DRequested(object sender, MedicalViewerData3DRequestedEventArgs e)
{
e.Succeed = Medical3DEngine.Provide3DInformation(e);
}
void cell_Data3DFrameRequested(object sender, MedicalViewer3DFrameRequestedEventArgs e)
{
RasterCodecs _codecs = new RasterCodecs();
e.Image = _codecs.Load((string)(_seriesManager.Stacks[0].Items[e.ImageIndex].Data));
_codecs.Dispose();
}
void cell_DerivativeGenerated(object sender, MedicalViewerDerivativeGeneratedEventArgs e)
{
e.DerivativeCell.ShowCellBoundaries = true;
e.DerivativeCell.ReferenceLine.Enabled = true;
}
void cell_FramesRequested(object sender, MedicalViewerRequestedFramesInformationEventArgs e)
{
MedicalViewerMultiCell cell = (MedicalViewerMultiCell)(sender);
RasterCodecs _codecs = new RasterCodecs();
int i;
RasterImage image;
string fileName;
if (e.RequestedFramesIndexes.Length > 0)
{
fileName = (string)(_seriesManager.Stacks[0].Items[e.RequestedFramesIndexes[0]].Data);
image = _codecs.Load(fileName);
}
else
return;
for (i = 1; i < e.RequestedFramesIndexes.Length; i++)
{
fileName = (string)(_seriesManager.Stacks[0].Items[e.RequestedFramesIndexes[i]].Data);
image.AddPage(_codecs.Load(fileName));
}
cell.SetRequestedImage(image, e.RequestedFramesIndexes, MedicalViewerSetImageOptions.Insert);
}
public MedicalViewer Viewer
{
get { return _medicalViewer; }
}
}
MedicalViewerCutLineForm GetMedicalViewerCutLineControl()
{
MedicalViewerSeriesManagerFrom form = new MedicalViewerSeriesManagerFrom();
MedicalViewerSeriesManager output = form.LoadJamesHead();
return new MedicalViewerCutLineForm(output);
}
// This example changes the default window level value by decrease the width by 100. Then resets the images based on the new value.
public void MedicalViewerCutLineExample()
{
MedicalViewerCutLineForm myForm = GetMedicalViewerCutLineControl();
MedicalViewer medicalViewer = myForm.Viewer;
myForm.ShowDialog();
}
Products | Support | Contact Us | Copyright Notices