FindConnection Method

Imports Leadtools 
Imports Leadtools.Multimedia 
Imports LeadtoolsMultimediaExamples.Fixtures 
 
Public _result As Boolean = False 
Public _serverAndClient As CaptureAndPlayCtrlForm = New CaptureAndPlayCtrlForm() 
 
Private _captureCtrl As CaptureCtrl 
Private _playCtrl As PlayCtrl 
Private _pMux As LMNetMux 
Private _pSink As LMNetSnk 
 
Private Const _networkUrl As String = "ltsf://127.0.0.1:27015" ' network stream url 
Private Const _networkAuthenticatedUrl As String = "ltsf://User1:P99999@127.0.0.1:27015" ' network stream url 
Private Const TestMessage As String = "LEAD NETWORK" 
 
Public Sub RequireLoginExample() 
   ' reference the capture control 
   _captureCtrl = _serverAndClient.CaptureCtrl 
 
   ' reference the play control 
   _playCtrl = _serverAndClient.PlayCtrl 
 
   Try 
      ' try to find a video camera 
      If _captureCtrl.VideoDevices("Logitech") Is Nothing Then 
         Throw New Exception("No Logitech video device available") 
      End If 
 
      _captureCtrl.VideoDevices("Logitech").Selected = True 
 
      ' select a video compressor 
      _captureCtrl.VideoCompressors.Mpeg4.Selected = True 
 
      ' set the target output file 
      _captureCtrl.TargetFormat = TargetFormatType.NET 
      _captureCtrl.TargetFile = _networkUrl 
 
      If _captureCtrl.IsModeAvailable(CaptureMode.Video) Then 
         ' here we will only capture 15 seconds for this example. 
         ' in a real application, you would not normally want to  
         ' set the time limit for capture. 
         _captureCtrl.TimeLimit = 15 
         _captureCtrl.UseTimeLimit = True 
 
         ' enable preview 
         _captureCtrl.Preview = True 
 
         ' subscribe to the started event for this example 
         ' we will connect a client after the capture starts 
         AddHandler _captureCtrl.Started, AddressOf CaptureCtrl_Started 
 
         ' subscribe to the media event for the player 
         AddHandler _playCtrl.MediaEvent, AddressOf PlayCtrl_MediaEvent 
 
         ' ready the capture graph in order to get the LNMetMux instance 
         _captureCtrl.ReadyCapture(CaptureMode.Video) 
 
         ' get the network multiplexer reference 
         _pMux = TryCast(_captureCtrl.GetSubObject(CaptureObject.TargetFilter), LMNetMux) 
 
         If Not _pMux Is Nothing Then 
            ' set some mux settings 
            _pMux.LiveSource = True 
         End If 
 
         ' get the network sink reference 
         _pSink = TryCast(_captureCtrl.GetSubObject(CaptureObject.Sink), LMNetSnk) 
 
         If Not _pSink Is Nothing Then 
            ' set some mux settings 
            _pSink.RequireLogin = True 
            _pSink.UseEncryption = LMNetSnkLib.NetSnk_Encryption.NetSnk_Encryption_None 
 
            ' clear all user registrations 
            _pSink.RemoveAllUsers() 
 
            ' setup up user logins 
            AddModifyUsers() 
 
            ' enumeration users 
            EnumerateUsers() 
 
            ' add a restriction 
            AddRestriction() 
 
            ' test timer for connection checking 
            _serverAndClient.TestTimer.Interval = 10000 
            _serverAndClient.TestTimer.Start() 
            AddHandler _serverAndClient.TestTimer.Tick, AddressOf ConnectionChecker 
         End If 
 
         ' start capture 
         _captureCtrl.StartCapture(CaptureMode.Video) 
 
         ' we'll loop on the state and pump messages for this example. 
         ' but you should not need to if running from a Windows Forms application. 
         Do While _captureCtrl.State = CaptureState.Running OrElse _playCtrl.State = PlayState.Running 
            Application.DoEvents() 
         Loop 
 
         ' release the mux and demux COM objects 
         If Not _pMux Is Nothing Then 
            Marshal.ReleaseComObject(_pMux) 
         End If 
 
         If Not _pSink Is Nothing Then 
            Marshal.ReleaseComObject(_pSink) 
         End If 
      End If 
   Catch ex As Exception 
      _result = False 
   End Try 
End Sub 
 
Private Sub AddModifyUsers() 
   ' early out if we could not get the sink interface 
   If _pSink Is Nothing Then 
      Return 
   End If 
 
   ' get the current connection list version 
   Dim oldVers As Integer = _pSink.ConnectionVersion 
 
   ' add a user 
   _pSink.AddUser("User1", "P12345") 
 
   ' get the current connection list version 
   Dim newVers As Integer = _pSink.ConnectionVersion 
 
   ' add another user 
   _pSink.AddUser("User2", "P67890") 
 
   ' find a user 
   Dim user1Id As Integer = _pSink.FindUser("User1") 
 
   ' set user 1's password -- was set above in the AddUser call 
   ' but we will change it here for demonstration purposes 
   _pSink.SetPassword(user1Id, "P99999") 
 
   ' remove User2 from the registered users list  
   Dim user2Id As Integer = _pSink.FindUser("User2") 
   _pSink.RemoveUser(user2Id) 
End Sub 
 
Private Sub EnumerateUsers() 
   ' get the current user count 
   Dim userCount As Integer = _pSink.UserCount 
 
   ' verify that we have two users now 
   _result = (userCount = 1) 
 
   ' demonstrate enumeration registered users 
   Dim i As Integer = 0 
   Do While i < userCount 
      ' do something with user names and passwords 
      Dim userName As String = _pSink.GetUsername(i) 
      Dim passWord As String = _pSink.GetPassword(i) 
      i += 1 
   Loop 
 
End Sub 
 
Private Sub AddRestriction() 
   ' add a restriction to the client which has the IP = 10.0.0.5 
   ' this will not allow a connection from this address.  
 
   ' get number of restrictions 
   Dim oldRestCount As Integer = _pSink.RestrictionCount 
 
   ' Number of restrictions we have.  
   Dim restrictCount As Integer = _pSink.AddRestriction("10.0.0.5") 
 
   ' get number of restrictions 
   Dim newRestCount As Integer = _pSink.RestrictionCount 
 
   ' verify that we have a new restriction count 
   _result = _result And (oldRestCount <> newRestCount) 
 
   ' enumeration restrictions (demonstration purposes) 
   Dim i As Integer = 0 
   Do While i < restrictCount 
      Dim restAddress As String = _pSink.GetRestriction(i) 
      ' do something with Restriction 
      i += 1 
   Loop 
 
   ' find our restriction we added above 
   Dim restriction As Integer = _pSink.FindRestriction("10.0.0.5") 
 
   ' remove it 
   _pSink.RemoveRestriction(restriction) 
 
   ' remove all restrictions (demonstration purposes) 
   _pSink.RemoveAllRestrictions() 
End Sub 
 
Private Sub CaptureCtrl_Started(ByVal sender As Object, ByVal e As EventArgs) 
   StartClient() 
End Sub 
 
Private Sub StartClient() 
   Try 
      ' connect a client 
      _playCtrl.SourceFile = _networkAuthenticatedUrl 
   Catch ex As Exception 
      _result = False 
      Console.WriteLine("Player (Client) Exception: {0}", ex.Message) 
   End Try 
End Sub 
 
Private Sub ConnectionChecker(ByVal sender As Object, ByVal e As EventArgs) 
   _serverAndClient.TestTimer.Stop() 
 
   ' get the number of users connected to the server 
   Dim connCount As Integer = _pSink.ConnectionCount 
 
   ' get the first connection (demonstration purposes) 
   Dim pcon As ILMNetSnkConnection = _pSink.FindConnection(1) 
   ' release it -- it is a COM object you know! 
   Marshal.ReleaseComObject(pcon) 
 
   ' get the first connection 
   pcon = _pSink.FirstConnection 
 
   ' check all connections with the server 
   Do While Not pcon Is Nothing 
      Dim pnext As ILMNetSnkConnection = pcon.NextConnection 
      Dim id As Long = pcon.ID 
      Dim userName As String = pcon.Username 
      Dim connAddr As String = pcon.Address 
 
      ' determine whether connection is enabled  
      ' it should be, we just enabled it above 
      Dim enabled As Boolean = pcon.Enabled 
 
      ' is it connected 
      Dim connected As Boolean = pcon.Connected 
 
      ' determine whether connection is disabled 
      ' and disconnect it if so 
      If enabled = False Then 
         ' close this connection 
         pcon.Close() 
      End If 
      Marshal.ReleaseComObject(pcon) 
      pcon = pnext 
   Loop 
 
   ' close all connections (demonstration purposes) 
   _pSink.CloseAll() 
 
   _serverAndClient.TestTimer.Start() 
End Sub 
 
Private Sub PlayCtrl_MediaEvent(ByVal sender As Object, ByVal e As MediaEventArgs) 
   If e.eventCode = MediaEventCode.EC_COMPLETE Then 
      _result = _result And True 
   End If 
End Sub