IMAGEHEADER

Summary

The IMAGEHEADER structure provides information about NITF file image header.

Syntax

typedef struct tagIMAGEHEADER 
{ 
   L_CHAR   *     pIM; 
   L_CHAR   *     pIID1; 
   NITFDATETIME  IDATIM; 
   L_CHAR   *  pTGTID; 
   L_CHAR   *  pIID2; 
   L_CHAR   *  pISCLAS; 
   L_CHAR   *  pISCLSY; 
   L_CHAR   *  pISCODE; 
   L_CHAR   *  pISCTLH; 
   L_CHAR   *  pISREL; 
   L_CHAR   *  pISDCTP; 
   NITFDATE    ISDCDT; 
   L_CHAR   *  pISDCXM; 
   L_CHAR   *  pISDG; 
   NITFDATE    ISDGDT; 
   L_CHAR   *  pISCLTX; 
   L_CHAR   *  pISCATP; 
   L_CHAR   *  pISCAUT; 
   L_CHAR   *  pISCRSN; 
   NITFDATE    ISSRDT; 
   L_CHAR   *  pISCTLN; 
   L_UINT      uENCRYP; 
   L_CHAR   *  pISORCE; 
   L_UINT      uNROWS; 
   L_UINT      uNCOLS; 
   L_CHAR   *  pPVTYPE; 
   L_CHAR   *  pIREP; 
   L_CHAR   *  pICAT; 
   L_UINT      uABPP; 
   L_CHAR   *  pPJUST; 
   L_CHAR   *  pICORDS; 
   L_CHAR   *  pIGEOLO; 
   L_UINT      uNICOM; 
   L_CHAR   ** pICOM; 
   L_CHAR   *  pIC; 
   L_CHAR   *  pCOMRAT; 
   L_UINT      uNBANDS; 
   L_UINT      uXBANDS; 
   L_CHAR   **  pIREPBAND; 
   L_CHAR   **  pISUBCAT; 
   L_CHAR   **  pIFCN; 
   L_CHAR   **  pIMFLTN; 
   L_UINT       uISYNC; 
   L_CHAR   *  pIMODE; 
   L_UINT      uNBPR; 
   L_UINT      uNBPC; 
   L_UINT      uNPPBH; 
   L_UINT      uNPPBV; 
   L_UINT      uNBPP; 
   L_UINT      uIDLVL; 
   L_UINT      uIALVL; 
   L_INT       nILOCRow; 
   L_INT       nILOCCol; 
   L_CHAR  *  pIMAG; 
   L_UINT      uUDIDL; 
   L_UINT      uUDOFL; 
   L_UCHAR *   pUDID; 
   L_UINT      uIXSHDL; 
   L_UINT      uIXSOFL; 
   L_UCHAR  *  pIXSHD; 
   L_UINT      uIMDATOFF; 
   L_UINT16    uBMRLNTH; 
   L_UINT16    uTMRLNTH; 
   L_UINT16    uTPXCDLNTH; 
   L_UCHAR   *  pTPXCD; 
}  IMAGEHEADER, *pIMAGEHEADER; 

Members

L_CHAR * pIM

Pointer to a character string that contains the ID of the sub-header type to be used. Possible value is:

L_CHAR * pIID1

Pointer to a character string that contains an alphanumeric sequence that represents the identification code associated with the image. The valid codes are determined by the application.

NITFDATETIME IDATIM

NITFDATETIME structure that contains information about the time of the image acquisition.

L_CHAR * pTGTID

Pointer to a character string that contains the identification of the primary target in the format, BBBBBBBBBBOOOOOCC, consisting of ten characters of Basic Encyclopedia (BE) identifier, followed by five characters of facility OSUFFIX, followed by the two character country code as specified in FIPS PUB 10-4.

L_CHAR * pIID2

Pointer to a character string that contains the identification of additional information about the image.

L_CHAR * pISCLAS

Pointer to a character string that contains a symbol character that represents the image security classification level. Possible values are:

L_CHAR * pISCLSY

Pointer to a character string that contains valid values that indicates the national or multinational image security classification system used to classify the image. Country Codes per FIPS PUB 10-4 shall be used to indicate national security systems.

If this member is all spaces it shall imply that no security classification system applies to the image.

L_CHAR * pISCODE

Pointer to a character string that contains the image codewords that indicates the image security compartments. Multiple entries shall be separated by a single space. The selection of a relevant set of codewords is application specific.

If this member is all spaces, it shall imply that no codewords apply to the image.

L_CHAR * pISCTLH

Pointer to a character string that contains an additional image security control and/or handling instructions (caveats). The selection of a relevant caveat(s) is application specific.

If this member is all spaces, it shall imply that no additional control and handling instructions apply to the image.

L_CHAR * pISREL

Pointer to a character string that contains a valid list of country and/or multilateral entity codes to which countries and/or multilateral entities the image is authorized for release. Valid items in the list are one or more country codes as found in FIPS PUB 10-4 and/or codes identifying multilateral entities.

If this member is all spaces, it shall imply that no image release instructions apply.

L_CHAR * pISDCTP

Pointer to a character string that contains a symbol character that represents the image declassification type or the image downgrading instructions. Possible values are:

If this member is all spaces, it shall imply that no image security declassification or downgrading instructions apply.

NITFDATE ISDCDT

NITFDATE structure that contains information about the image declassification date.

This member is valid only if the value of the pISDCTP member is set to "DD" string.

L_CHAR * pISDCXM

Pointer to a character string that contains the reason why the image is exempt from automatic declassification.

This member is valid only if the value of the pISDCTP member is set to "X" string. Possible values range from "X1" to "X8" and "X251" to "X259".

If this member is all spaces, it shall imply that an image declassification exemption does not apply.

L_CHAR * pISDG

Pointer to a character string that contains a symbol character that represents the image downgrade classification level.

This member is valid only if the value of the pISDCTP member is set to "GD" or "GE" string. Possible values are:

If this member contains a space, it shall imply that file security downgrading does not apply.

NITFDATE ISDGDT

NITFDATE structure that contains information about the date on which an image is to be downgraded.

This member is valid only if the value of the pISDCTP member is set to "GD" string.

L_CHAR * pISCLTX

Character string that contains the image classification text that includes information about the identification of declassification or downgrading event.

This member is valid only if the value of the pISDCTP member is set to "DE" or "GE" strings. It may also be used to identify multiple classification sources and/or any other special handling rules. Values are user-defined free text. If this member is all spaces, it shall imply that additional information about image classification does not apply.

L_CHAR * pISCATP

Pointer to a character string that contains a symbol character that represents the image classification authority type. Possible values are:

If this member contains a space, it shall imply that image classification authority type does not apply.

L_CHAR * pISCAUT

Pointer to a character string that contains the image classification authority dependent on the value of the pISCATP member.

Values are user-defined free text which should contain the following information:

In the latter case, the image originator will maintain a record of the sources used in accordance with existing security directives. One of the multiple sources may also be identified in image classification Text if desired.

If this member is all spaces, it shall imply that no image classification authority applies.

L_CHAR * pISCRSN

Pointer to a character string that contains a symbol character that represents the image classification reason. Possible values range from "A" to "G". These correspond to the reasons for original classification per E.O. 12958, Section 1.5. (a) Through (g).

If this member contains a space, it shall imply that no image classification reason applies.

NITFDATE ISSRDT

NITFDATE structure that contains information about the date of the source used to derive the classification of the image. In the case of multiple sources, the date of the most recent source shall be used.

L_CHAR * pISCTLN

Pointer to a character string that contains the image security control number. The format of the security control number shall be in accordance with the regulations governing the appropriate security channel(s).

If this member is all spaces, it shall imply that no image security control number applies.

L_UINT uENCRYP

Reserved for future use. Must be 0.

L_CHAR * pISORCE

Pointer to a character string that contains a description of the source of the image. If the source of the data is classified, then the description shall be preceded by the classification, including codeword(s).

If this member is all spaces, it shall imply that no image source data applies.

L_UINT uNROWS

Value that represents the total number of rows of significant pixels in the image. If the value of uNROWS member is less than the value of (uNPPBV * uNBPC), the rows indexed within the range uNROWS to (uNPPBV * uNBPC) 1, shall contain fill data.

NOTE: Only the rows indexed within the range 0 to (uNROWS 1) of the image contain significant data.

The pixel fill values are determined by the application.

L_UINT uNCOLS

Value that represents the total number of columns of significant pixels in the image. If the value of uNCOLS member is less than the value of (uNPPBH * uNBPR), the columns indexed within the range uNCOLS to (uNPPBH * uNBPR) 1 of the image contain significant data.

The pixel fill values are determined by the application.

L_CHAR * pPVTYPE

Pointer to a character string that contains symbol characters that represents the type of computer representation used for each pixel of each band in the image. Possible values are:

Data bits of this type shall be limited to 16, 32, or 64-bits.

L_CHAR * pIREP

Pointer to a character string that contains symbol characters that represents the processing required for displaying an image. Possible values are:

In addition, compressed imagery can have this member set to YCbCr601 when compressed in the ITU-R Recommendation BT.601-5 color space using JPEG (pIC member = "C3"). This member should be used in conjunction with the pIREPBAND member to interpret the processing required to display each band in the image.

L_CHAR * pICAT

Pointer to a character string that contains a symbol characters that represents the specific category of image, raster or grid data. The specific category of an IS reveals its intended use or the nature of its collector. Possible categories are:

Categories for geographic products or geo-reference support data:

This member should be used in conjunction with the pISUBCAT member to interpret the significance of each band in the image.

L_UINT uABPP

• Value that represents the number of "significant bits" for the value in each band of each pixel without compression. Even when the image is compressed, uABPP member contains the number of significant bits per pixel that were present in the image before compression. The value of this member must be less than or equal to the value of uNBPP member. The number of adjacent bits within each uNBPP member is used to represent the value. These "representation bits" shall be left justified or right justified within the bits of the uNBPP bits member, according to the value in the pPJUST member. For example, if 11-bits pixels are stored in 16 bits, the value of this member will be 11 and uNBPP will be 16. The default number of significant bits to be used is the value of uNBPP member.

L_CHAR * pPJUST

• Pointer to a character string that contains a symbol character that represents the pixel justification. Possible values are:

  Value	Meaning
  "L"	Left justified significant bits.
  "R"	Right justified significant bits.

Non-significant bits in each pixel must contain the binary value 0. Right justification is recommended.

This member is valid only if the value of the uABPP member is not equal to the value of the uNBPP member.

L_CHAR * pICORDS

Pointer to a character string that contains a symbol character that represents the type of coordinate representation used for providing an approximate location of the image in the pIGEOLO member. Possible values are:

(Choice between "N" and "S" is based on hemisphere of northernmost point.) If no coordinate system is identified, the space shall be used.

L_CHAR * pIGEOLO

Pointer to a character string that contains an approximate geographic location which is not intended for analytical purposes (e.g., targeting, mensuration, distance calculation); it is intended to support general user appreciation for the image location which is specified in pICORDS member (e.g., cataloging).

The locations of the four corners of the (significant) image data shall be given in image coordinate order: (0,0), (0, MaxCol), (MaxRow, MaxCol), (MaxRow, 0). MaxCol and MaxRow shall be determined from the values contained, respectively, in the uNCOLS member and the uNROWS member. MaxCol = is equal to the value contained in the uNCOLS member - 1 (MaxCol = uNCOLS -1).

Valid corner locations in geographic coordinates shall be expressed as latitude and longitude. The format ddmmssXdddmmssY represents latitude and longitude. The first half, ddmmssX, represents degrees, minutes, and seconds of latitude with X representing North or South (N for North, S for South). The second half, dddmmssY, represents degrees, minutes, and seconds of longitude with Y representing East or West (E for East, W for West), respectively. Coordinates shall only be populated in the IGEOLO member to the known precision of the corner coordinates. Non-significant digits of the member shall be replaced with spaces. An example of the 60 character member with two spaces depicting the absence of arc seconds is ddmm Xdddmm Yddmm Xdddmm Yddmm Xdddmm Yddmm Xdddmm Y.

Decimal degrees are expressed as +\-dd.ddd +\-ddd.ddd (four times) where +\-dd.ddd equals latitude (+ represents northern hemisphere, - represents southern hemisphere) and +\-ddd.ddd equals longitude (+ represents eastern hemisphere, - represents western shall be expressed either in plain UTM coordinates or using MGRS. Normally UTM/MGRS coordinates should be rounded to the nearest 10 meters to match the precision of the geographic coordinates. Plain UTM coordinates use the format zzeeeeeennnnnnn where zz represents the UTM zone number, and eeeeee, nnnnnnn represents Easting and Northing. Hemisphere (N or S) for plain UTM is expressed in the pICORDS member.UTM expressed in MGRS use the format zzBJKeeeeennnnn where zzBJK represents the zone, band and 100 km square within the zone and eeeee, nnnnn represents residuals of Easting and Northing. (MaxRow, 0).MaxCol and MaxRow shall be determined from the values contained, respectively, in the uNCOLS member and the uNROWS member. MaxCol is equal to the value contained in the uNCOLS member minus 1 (MaxCol = uNCOLS -1).

Valid corner locations in geographic coordinates shall be expressed as latitude and longitude. The format ddmmssXdddmmssY represents latitude and longitude. The first half, ddmmssX, represents degrees, minutes, and seconds of latitude with X representing North or South (N for North, S for South). The second half, dddmmssY, represents degrees, minutes, and seconds of longitude with Y representing East or West (E for East, W for West), respectively. Coordinates shall only be populated in the pIGEOLO field to the known precision of the corner coordinates. Non-significant digits of the field shall be replaced with spaces. An example of the 60 character member with two spaces depicting the absence of arc seconds is ddmm Xdddmm Yddmm Xdddmm Yddmm Xdddmm Yddmm Xdddmm Y. Decimal degrees are expressed as +/-dd.ddd+/-ddd.ddd (four times) where +/-dd.ddd equals latitude (+ represents northern hemisphere, - represents southern hemisphere) and +/-ddd.ddd equals longitude (+ represents eastern hemisphere, - represents western hemisphere). Non-significant digits of the member shall be replaced with spaces.

L_UINT uNICOM

Value that represents the number of image comments used as free text.

L_CHAR ** pICOM

Pointer to a character string that contains a free-form text, That intended to be used as a single comment block and should be used that way. This member must contain the nth free text image comment, where n is defined as follows: 0<=n< the value of the uNICOM member. If the image comment is classified, it must be preceded by the classification, including codeword(s). The value of this member will be ignored if the value of the uNICOM member is set to 0.

L_CHAR * pIC

Pointer to a character string that contains symbol characters that represents the form of compression used in representing the image data. Possible values are:

L_CHAR * pCOMRAT

Pointer to a character string that contains symbol characters that represents the compression rate code for the image.

This member is valid only for all values of pIC except "NC" and "NM". Possible values are:

If the value of the pIC member is "C1" or "M1":

For more information, refer to ITU-T T.4, AMD2.

For more information, refer to ITU-T T.4, AMD2.

For more information, refer to ITU-T T.4, AMD2.

If the value of the pIC member is "C3", "M3", "C5", "M5", or "I1":

If the value of the pIC member is "C4" or "M4":

L_UINT uNBANDS

Value that represents the number of data bands within the specified image. This member and the pIREP member are interrelated and independent of the pIMODE member. The corresponding values for the pIREP and uNBANDS members are NODISPLY, 0 to 9; MONO, 1; RGB, 3; RGB/LUT, 1; YCbCr601, 3; NVECTOR, 0 to 9; POLAR, 2; VPH, 2; MULTI, 0, 2 to 9; and zeros for multiple band images or matrices with greater than 9 bands.

L_UINT uXBANDS

Value that represents the number of bands or data points comprising the multiple band image.

This member is valid only if the value of the uNBANDS member is set to 0.Otherwise this member will be ignored if the value of the uNBANDS member is range from 1 to 9.

L_CHAR ** pIREPBAND

Pointer to a character string that contains a symbol that represents the processing required for displaying the nth band of the image with regard to the general image type as recorded in the pIREP member. The significance of each band in the image can be derived from the combination of the pICAT, and pISUBCAT[n] members. Valid values of the pIREPBAND[n] member depend on the value of the pIREP member.

The following standard values shall apply:

1. R, G, B respectively for a Red, Green, Blue representation of the band,

2. LU for a LUT representation of the band (e.g., a three table LUT for RGB and a single table LUT for shades of grey),

3. M for a monochrome representation of the band, spaces for a band not designated for display, but may be displayed if desired,

4. E Y, Cb, Cr respectively for the Luminance,

5. Chrominance (blue), and Chrominance (red) representation of a YCbCr601 (compressed case only) image.

The only valid values when pIREP contains MULTI are M, R, G, B, and LU:

1. It is strongly recommended that 3 of the multiple bands have the IREPBAND[n] members populated with R, G, and B.

2. When bands marked as LU, R, G, B, and M are present, the RGB designated bands are the default bands for display. If R, G, B are not present, the default displayable band is the LU band. If R, G, B, or LU are not present, the default displayable band is the first M band. When no bands are marked with LU, R,G, B, or M the first three bands may be displayed as R, G, and B respectively. For consistency, multi-spectral images cannot have more than one band, each marked as R, G, and B.

3. IREPBAND[n] shall be filled with the M value, if the band is to be represented as monochrome.

4. IREPBAND[n] shall be filled with the LU value, if the band is to be represented using a LUT.

5. When IREPBAND[n] is filled with spaces (code 0x20), no specific representation is defined for the band, but it may be displayed if desired.

The only valid values when pIREP contains MONO images is M or spaces.
The only valid values when pIREP contains RGB images are R, G and B.
The only valid value when IREP contains RGB/LUT images is LU.
The only valid values when IREP contains YCbCr601 images are Y, Cb and Cr.

L_CHAR ** pISUBCAT

Pointer to a character string that contains the nth band subcategory. The purpose of this member is to provide the significance of the nth bands of the image with regard to the specific category (pICAT member) of the overall image. The use of this member is user-defined except for the following: For MultiSpectral imagery (pICAT contains MS), HyperSpectral imagery (pICAT contains HS), and Infrared imagery (pICAT contains IR), pISUBCAT[n] contains the wavelength in nanometers. When pICAT contains SAR, ISUBCAT[n] contains I for the inphase and Q for the quadrature components or M for the magnitude and P for the phase components. When pICAT contains WIND or CURRENT, pISUBCAT[n] contains SPEED for wind or water speed , or DIRECT for wind or water direction. For location grids, the number of bands is strictly equal to 2, consequently, there are only 2 members, the pISUBCAT[0] member and the pISUBCAT[1] member. Standard values of these members of location grids are either CGX and CGY for the cartographic X (Easting) and Y (Northing) bands, or GGX and GGY with the geographic X representing the longitude band and Y representing the latitude band.

L_CHAR ** pIFCN

Pointer to a character string that contains the nth band image filter condition. Possible value is:

Other values are reserved for future use.

L_CHAR ** pIMFLTN

Reserved for future use. Pass spaces.

L_UINT uISYNC

Reserved for future use. Pass 0.

L_CHAR * pIMODE

Pointer to a character string that contains the image mode. Possible values are: "B", "P", "R", and "S". The interpretation of pIMODE member is dependent on whether the image is JPEG compressed (pIC = "C3", "C5", "I1", "M3", or "M5"), VQ compressed (pIC = "C4", or "M4"), or uncompressed (pIC = "NC" or "NM").

L_UINT uNBPR

Value that represents the number of image blocks in a row of blocks in the horizontal direction. If the image consists of only a single block, this member will contain the value 1.

L_UINT uNBPC

Value that represents the number of image blocks in a column of blocks in the vertical direction. If the image consists of only a single block, this member will contain the value 1.

L_UINT uNPPBH

Value that represents the number of pixels horizontally in each block of the image. It shall be the case that the product of the values of the uNBPR member and the uNPPBH member is greater than or equal to the value of the uNCOLS member (uNBPR * uNPPBH >= uNCOLS).

L_UINT uNPPBV

Value that represents the number of pixels vertically in each block of the image. It shall be the case that the product of the values of the uNBPC member and the uNPPBV member is greater than or equal to the value of the uNROWS member (uNBPC * uNPPBV >= uNROWS).

L_UINT uNBPP

Value that represents the number of bits per pixel per band. If the value of the pIC member is set to "NC", "NM", "C4", or "M4", the uNBPP member will contain the number of storage bits used for the value from each component of a pixel vector. The value in this member always will be greater than or equal to actual bits per pixel (uABPP). For example, if 11-bit pixels are stored in 16 bits, this member shall contain 16 and actual bits per pixel shall contain 11. If pIC = "C3", "M3", "C5", "M5", or "I1" this member shall contain the value 8 or the value 12. If pIC = "C1", this member shall contain the value 1.

L_UINT uIDLVL

Value that represents the display level of the image relative to other displayed file components in a composite display. Possible values range from 1 to 999. The display level of each displayable segment (image or graphic) within a file shall be unique; that is, each number from 1 to 999 is the display level of, at most, one segment.

L_UINT uIALVL

Value that represents the attachment level of the image. Possible values are zero, and the display level value of any other image or graphic in the file.

L_INT nILOCRow

Value that represents the image location offset from the nILOCRow or GRAPHICHEADER.nSLOCRow member value of the segment to which the image is attached or from the origin of the CCS when the image is unattached (IALVL contains 000). A row value of 0 indicates no offset. Positive row values indicate offsets down. While negative row values indicate offsets up.

L_INT nILOCCol

Value that represents the image location offset from the nILOCCol or GRAPHICHEADER.nSLOCCol member value of the segment to which the image is attached or from the origin of the CCS when the image is unattached (IALVL contains 000). A row value of 0 indicates no offset. Positive row values indicate offsets down. While negative row values indicate offsets up.

L_CHAR * pIMAG

Pointer to a value that represents the magnification (or reduction) factor of the image relative to the original source image. Decimal values are used to indicate magnification, and decimal fraction values indicate reduction. For example, "2.30" indicates the original image has been magnified by a factor of "2.30", while "0.5" indicates the original image has been reduced by a factor of 2. In addition, the following values shall be used for reductions that are reciprocals of non-negative powers of 2: /2 (for 1/2), /4 (for 1/4), /8 (for 1/8), /16 (for 1/16), /32 (for 1/32), /64 (for 1/64), /128 (for 1/128). Possible values are:

L_UINT uUDIDL

Value that represents the user-defined image data length. A value of 0 indicates that no TREs are included in the pUDID member. If a TREs exists, the member will contain the sum of the length of all the TREs appearing in the pUDID member + 3 bytes (length of uUDOFL member). If a TRE is too long to fit in the pUDID member or the pIXSHD member, it shall be put in the TRE overflow DES with DESID set to the value TRE_OVERFLOW.

L_UINT uUDOFL

Value that represents the user-defined overflow. If present, the value of this member is 0 if the TREs in the pUDID member do not overflow into a DES, or the value is a sequence number of the DES into which they do overflow. The value of this member will be ignored if the value of the uUDIDL member is set to 0.

L_UCHAR * pUDID

Pointer to a character string that contains the user-defined image data. This member shall contain user-defined TREs. The length of this member shall be the length specified by the member uUDIDL - 3. TREs in this member for an image shall contain information pertaining specifically to the image. TREs shall appear one after the other with no intervening bytes. The first byte of this member shall be the first byte of the first TRE appearing in the member. The last byte of this member shall be the last byte of the last TRE to appear in the member. This member shall be ignored if the value of the uUDIDL member is set to 0.

L_UINT uIXSHDL

Value that represents the image extended sub-header data length. A value of zero shall represent that no TREs are included in the uIXSHD member. If a TRE exists, the member shall contain the sum of the length of all the TREs appearing in the pIXSHD member + 3 (length of uIXSOFL member), in bytes. If a TRE is too long to fit in the pIXSHD member or the pUDID member, it may be put in the TRE overflow DES with DESID set to the value TRE_OVERFLOW.

L_UINT uIXSOFL

Value that represents the image extended sub-header overflow. This member shall contain 0 if the TREs in pIXSHD member do not overflow into a DES, or shall contain the sequence number of the DES into which they do overflow. This member shall be ignored if the value of the iIXSHDL member is set to 0.

L_UCHAR * pIXSHD

Pointer to a character string that contains the image extended sub-header data. This member shall contain TREs approved and under configuration management by the ISMC. The length of this member shall be the length specified by the member uIXSHDL - 3. TREs in this member for an image shall contain information pertaining specifically to the image. TREs shall appear one after the other in this member with no intervening bytes. The first byte of this member shall be the first byte of the first TRE appearing in the member. The last byte of this member shall be the last byte of the last TRE to appear in the member. This member shall be ignored if the value of the uIXSHDL member is set to 0.

L_UINT uIMDATOFF

Value that represents the blocked image data offset. This member is valid only if the value of the pIC member is set to "NM", "M1", "M3", "M4", or "M5". It identifies the offset from the beginning of the image data mask to the first byte of the blocked image data.

L_UINT16 uBMRLNTH

Value that represents the block mask record length. This member is valid only if the value of the pIC member is set to "NM", "M1", "M3", "M4", or "M5". It identifies the length of each block mask record, in bytes. The length of each block mask record is 4 bytes. The total length of all the block mask records is equal to uBMRLNTH * uNBPR * uNBPC * uNBANDS (one 4 bytes record for each block of each band in the image).

L_UINT16 uTMRLNTH

Value that represents the pad pixel mask record length. This member is valid only if the value of the pIC member is set to "NM", "M1", "M3", "M4", or "M5". It identifies the length of each pad pixel mask record, in bytes. When present, the length of each pad pixel mask record is 4 bytes. The total length of the pad pixel mask records is equal to uTMRLNTH * uNBPR * uNBPC * uNBANDS (one 4 bytes record for each block for each band in the image).

L_UINT16 uTPXCDLNTH

Value that represents the pad output pixel code length. This member is valid only if the value of the pIC member is set to "NM", "M1", "M3", "M4", or "M5". It identifies the length in bits of the pad output pixel code. If coded as 0, then no pad pixels are present, and the pTPXCD member is not recorded. If the value of the pIC member is set to "M3", the value of this member shall be set to 0.

L_UCHAR * pTPXCD

Pointer to a character string that contains the pad output pixel code. This member is valid only if the value of the pIC member is set to "NM", "M1", "M3", "M4", or "M5" and the value of the uTPXCDLNTH member is not zero. It contains the output pixel code that represents a pad pixel in the image. This value is unique within the image, and allows the user to identify pad pixels. The pad output pixel code length is determined by the uTPXCDLNTH member. If the number of bits used by pTPXCD member is less than the number of bits available for storage, the value shall be justified in accordance with the pPJUST member in the image sub-header (L for left, R for right justified.)

Comments

pIMAGEHEADER is a pointer to an IMAGEHEADER structure. Where a function parameter type is pIMAGEHEADER, declare an IMAGEHEADER variable and pass the variable's address in the parameter. Declaring a pIMAGEHEADER variable is necessary only if the program requires a pointer.

Usage

• LNITFFile::FreeImageHeader
• LNITFFile::GetImageHeader
• LNITFFile::SetImageHeader