How to import DICOM files to the Storage Server Demo Application?

This post will show you what you will need to do to store your DICOM files to the LEADTOOLS PACS DICOM Storage Server.

If you have not already ran the PACS Config Demo and the PACS Database Config Demo then you will have to set these up first before you can start storing DICOM files to the storage server. Here is another post that will walk you through setting that up:
https://www.leadtools.co...p-the-Medical-Web-Viewer

Once you have setup both the PACS Config Demos mentioned above, you can then start storing your DICOM files to the Storage Server.

• Open the Storage Server Manager application found here: C:\LEADTOOLS 19\Shortcuts\PACS\.NET Class Libraries\PACS Storage Server\Storage Server
  
  
• It will ask you to fill in a username/password. You should have received these when setting up the PACS Config Demos. The username/password should be the name of your PC.
  
  
  
  
• Click the "Database Manager" tab on the left
  
  
  
  
• You should now see six X-Rays of the human chest near the top. Select the one with a " + " located in the bottom right.
  
  
  
  
• Now it will ask you to find the DICOM that you wish to add to the server. Select your DICOM and click "Open"
  
  
• There will be a Status Report Box that pops up to notify you if the adding the file was successful/unsuccessful. Click "Close" to close the window.
  
  
• Your file has been added to the DICOM Storage Server
  

Edited by moderator Monday, February 3, 2020 8:25:57 AM(UTC)  | Reason: Not specified