EnableAutoFeed, what capability is underneath this

Options

View

Last

Unread

Previous Topic Next Topic

This topic and its replies were posted before the current version of LEADTOOLS was released and may no longer be applicable.

#1 Posted : Wednesday, March 1, 2006 12:14:48 PM(UTC)

aflowers001

Groups: Registered
Posts: 2

Within the TwainSession class in the .NET 14.5 classes there are a whole pile of properties that can control how the transfer takes place and how the scanner works.

If I set EnableAutoFeed to true in between a Get/Set properties call it doesn't appear to use the sheet feeder when scanning, whereas if I set the capability manually using TwainCapabilityType.FeederEnabled it will use/not use the sheet feed or flatbed correctly.

Is there some documentation available that details what each of the properties within the TwainSession class actually set, and any relationships betwen them.


	Try the latest version of LEADTOOLS for free for 60 days by downloading the evaluation: https://www.leadtools.com/downloads Wanna join the discussion? Login to your LEADTOOLS Support account or Register a new forum account.

#2 Posted : Sunday, March 5, 2006 12:24:33 AM(UTC)

Bashar

Groups: Guests
Posts: 3,022

Was thanked: 2 time(s) in 2 post(s)

Those two are different capabilities. The FeederEnabled
capability needs to be set first to enable the feeder. It does
not cause the application to actually scan from the feeder. Setting the EnableAutoFeed capability afterwards does this job.

You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.