This topic and its replies were posted before the current version of LEADTOOLS was released and may no longer be applicable.
#1
Posted
:
Tuesday, January 16, 2007 7:40:29 AM(UTC)
Groups: Registered
Posts: 3
Dear Sir,
I am using Imaging Control V 14.5 .Net. I have HP Laser Jet P2015 printer.
When printing the attached docuement using "PrintPreviewDemo" Example sent with package. The problem is that the size of the document in the printer pool is around 60 MB.
So what is the problem??
Thank u in advance
Ihab attached the following image(s):
#2
Posted
:
Tuesday, January 16, 2007 12:04:18 PM(UTC)
Groups: Registered, Tech Support, Administrators
Posts: 764
This is not a problem and is by design. In .NET, there is nothing you can do to decrease the size of the spool size except printing at a lower DPI.
#3
Posted
:
Wednesday, January 17, 2007 4:08:54 AM(UTC)
Groups: Registered
Posts: 3
Thank you very much for your reply.
But how this could be done?
From the code or from the printer it self?
Best Regards,
#4
Posted
:
Wednesday, January 17, 2007 4:26:10 AM(UTC)
Groups: Registered, Tech Support, Administrators
Posts: 764
This would depend on the printer's drivers. Some printers have a fixed DPI setting that cannot be changed. However, most printers will let you change the DPI you are printing at. For information on how to do this, check with your printer manufacturer and/or MSDN.
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.