This topic and its replies were posted before the current version of LEADTOOLS was released and may no longer be applicable.
#1
Posted
:
Thursday, July 21, 2005 6:37:11 AM(UTC)
Groups: Registered
Posts: 9
Hi
I have try the NetServer example in video conferencing SDK, if I send H264, there is no problem, the client can play the video. Unfortunately, whe I send H263 (allH263), the client side can not decode or something, no video display on the client side. Is there something wrong with the example or codec, or just my problem??
Thank you very much for reading this post.
Best Regards
Ferdinand Ng
Edited by moderator Thursday, October 20, 2016 10:42:10 AM(UTC)
| Reason: Removed defunct emoticon
#2
Posted
:
Friday, July 22, 2005 10:18:29 AM(UTC)
Groups: Registered
Posts: 9
By default, the LEAD H263 Codec sends a key frame every 60 seconds. The client cannot show any data until it gets a new key frame, which can take up to 60 seconds with these default compressor settings. This is too much for the NetServer, so you should reduce the key frame interval in the H263 encoder (try setting it to 2-3 seconds).
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.