RingEffectCommand Class

Divides the image into the specified number of rings. Each ring is rotated according to a rotation angle. The rotation angle for each ring will be chosen randomly by the command or can be passed to the command. This command is available in the Imaging Pro and above toolkits.

Object Model

Syntax

C#
Visual Basic
WinRT C#
Objective-C
Java
WinRT JavaScript
C++

public class RingEffectCommand : Leadtools.ImageProcessing.RasterCommand, Leadtools.ImageProcessing.IRasterCommand

'Declaration
 
Public Class RingEffectCommand 
   Inherits Leadtools.ImageProcessing.RasterCommand
   Implements Leadtools.ImageProcessing.IRasterCommand

'Usage
 
Dim instance As RingEffectCommand

public sealed class RingEffectCommand : Leadtools.ImageProcessing.IRasterCommand

function Leadtools.ImageProcessing.SpecialEffects.RingEffectCommand()

public ref class RingEffectCommand : public Leadtools.ImageProcessing.RasterCommand, Leadtools.ImageProcessing.IRasterCommand

Remarks

This command can process the whole image or a region of the image. If the image has a region, the effect is applied only to the region.
Divides the image into a certain number of rings. Each ring is rotated compared to its inner ring according to a shift angle. The command will pick the shift angle at random if the RingEffectCommandFlags.FixedAngle flag is not set, or will use the angle specified by the Angle property, or the angle parameter of the Constructor if the RingEffectCommandFlags.FixedAngle flag is set).
If the RingEffectCommandFlags.FixedAngle flag is not set then the command will pick the shift angle randomly. The starting point (that is, the "randomize value") for the random number generator is set in the Randomize property, or the randomize parameter if you are using the appropriate RingEffectCommand Constructor as follows:
If the randomize value is zero then the command will select a random value between 1 and 500 for the randomize value.
If the randomize value is > 0, it will be used for the randomize value. Note that randomize value should be between 1 and 500 in this case.
Although the numbers generated are random, if you start with the same randomize value you will always get the same sequence of random numbers. This means that if you call the command twice with the same randomize value, you will get the same result.
The center of the rings is determined by the Origin property or the origin parameter if you are using the appropriate RingEffectCommand Constructor. The command calculates the width of each ring by dividing the maximum radius by the number of rings. The maximum radius is in the Radius property or the radius parameter of the Constructor when the RingEffectCommandFlags.MaxRadius flag is set.
The minimum width of each circle is 2. If the result of the division is less than 2, the command will draw ((radius value) / 2) rings, each ring having a width of 2.
Rings with a large radius might not be completely inside the image. We will refer to these as "incomplete rings". We will refer to a portion of the ring that is outside the image as "undetermined portion". When you rotate an incomplete ring, an undetermined portion of the ring might come into view. The command has 3 ways of specifying the output of the pixels where undetermined portions come into view:
Leave original image pixels unchanged (RingEffectCommandFlags.NoChange flag is set) or
Repeat edge pixels (RingEffectCommandFlags.Repeat flag is set) or
Fill the undefined area with color that is stored in the Color property, or the color parameter if you are using the appropriate RingEffectCommand Constructor, if the RingEffectCommandFlags.COlor flag is set).
The determined portion of the ring will always displace the original image pixels.
The image is split into an innermost circle and a number of rings. The innermost circle will not be rotated. Each ring is rotated compared to the inner ring. The rotation angle is as follows:
If the RingEffectCommandFlags.FixedAngle flag is set, each ring will be rotated against its inner ring by the value specified in the Angle property, or the angle parameter if you are using the appropriate RingEffectCommand Constructor. In other words, each index will be rotated against the original position by the angle value * <ring index>. (The index is 0-based. The innermost circle is considered to have an index of 0 and will not be rotated).
If the RingEffectCommandFlags.FixedAngle flag is not set, the command will pick random rotation angles for each ring.
The width of the ring is determined as follows:
If the RingEffectCommandFlags.Radius flag is set, the radius value is the width of each ring
If the RingEffectCommandFlags.MaxRadius flag is set, the radius value will be the maximum ring radius. In this case, the width of each ring will be ((radius value) / (Ring count value + 1)).
This command supports all bits/pixel supported by LEADTOOLS.
This command supports 12- and 16-bit grayscale and 48- and 64-bit color images. Support for 12- and 16-bit grayscale and 48- and 64-bit color images is available only in the Document/Medical toolkits.
This command does not support signed data images.
This command does not support 32-bit grayscale images.

For more information, refer to Applying Artistic Effects.

Example

Run the RingEffectCommand on an image.

C#
Visual Basic
WinRT C#
WinRT JavaScript
Silverlight C#
Silverlight VB

Copy Code

Imports Leadtools
Imports Leadtools.Codecs
Imports Leadtools.ImageProcessing.SpecialEffects

<TestMethod()> _
Public Sub RingEffectCommandExample()
   Dim codecs As New RasterCodecs()
   codecs.ThrowExceptionsOnInvalidImages = True
   Dim leadImage As RasterImage = codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "ImageProcessingDemo\\Image2.jpg"))

   ' Prepare the command
   Dim command As RingEffectCommand = New RingEffectCommand
   command.Origin = New LeadPoint(leadImage.Width \ 2, leadImage.Height \ 2)
   command.Radius = command.Origin.X
   command.RingCount = 10
   command.Randomize = 0
   command.Color = New RasterColor(0, 0, 0)
   command.Angle = 100
   command.Flags = RingEffectCommandFlags.Color Or RingEffectCommandFlags.FixedAngle Or RingEffectCommandFlags.MaxRadius
   ' Apply a ring effect to this image with origin (Origin). The maximum ring radius is equal to half of the image's width. Draw 10 rings, fill the undefined areas with the Black color and the shift angle is equal to 1 degrees. Note that _
         'you will have undefined areas only if the image width is greater than the image height.
   command.Run(leadImage)
   codecs.Save(leadImage, Path.Combine(LEAD_VARS.ImagesDir, "Result.jpg"), RasterImageFormat.Jpeg, 24)

End Sub

Public NotInheritable Class LEAD_VARS
Public Const ImagesDir As String = "C:\Users\Public\Documents\LEADTOOLS Images"
End Class

using Leadtools;
using Leadtools.Codecs;
using Leadtools.ImageProcessing.SpecialEffects;

[TestMethod]
public void RingEffectCommandExample()
{
   // Load an image
   RasterCodecs codecs = new RasterCodecs();
   codecs.ThrowExceptionsOnInvalidImages = true;
   RasterImage image = codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, @"ImageProcessingDemo\Image2.jpg"));

   // Prepare the command
   RingEffectCommand command  = new RingEffectCommand();
   command.Origin = new LeadPoint((image.Width / 2), (image.Height / 2));
   command.Radius             = command.Origin.X;
   command.RingCount          = 10;
   command.Randomize          = 0;
   command.Color              = new RasterColor(0,0,0);
   command.Angle              = 100;
   command.Flags              = RingEffectCommandFlags.Color | RingEffectCommandFlags.FixedAngle | RingEffectCommandFlags.MaxRadius;
   // Apply a ring effect to this image with origin (Origin). The maximum ring radius is equal to half of the image's width. Draw 10 rings, fill the undefined areas with the Black color and the shift angle is equal to 1 degrees.
         //Note that you will have undefined areas only if the image width is greater than the image height.
   command.Run(image);
   codecs.Save(image, Path.Combine(LEAD_VARS.ImagesDir, "Result.jpg"), RasterImageFormat.Jpeg, 24);

}

static class LEAD_VARS
{
public const string ImagesDir = @"C:\Users\Public\Documents\LEADTOOLS Images";
}

using Leadtools;
using Leadtools.Codecs;
using Leadtools.ImageProcessing.SpecialEffects;

[TestMethod]
public async Task RingEffectCommandExample()
{
   // Load an image
   RasterCodecs codecs = new RasterCodecs();
   codecs.ThrowExceptionsOnInvalidImages = true;
   string srcFileName = @"Assets\Image1.cmp";
   StorageFile loadFile = await Tools.AppInstallFolder.GetFileAsync(srcFileName);
   RasterImage image = await codecs.LoadAsync(LeadStreamFactory.Create(loadFile));

   // Prepare the command
   RingEffectCommand command  = new RingEffectCommand();
   command.Origin = LeadPointHelper.Create((image.Width / 2), (image.Height / 2));
   command.Radius             = command.Origin.X;
   command.RingCount          = 10;
   command.Randomize          = 0;
   command.Color              = RasterColorHelper.Create(0,0,0);
   command.Angle              = 100;
   command.Flags              = RingEffectCommandFlags.Color | RingEffectCommandFlags.FixedAngle | RingEffectCommandFlags.MaxRadius;
   // Apply a ring effect to this image with origin (Origin). The maximum ring radius is equal to half of the image's width. Draw 10 rings, fill the undefined areas with the Black color and the shift angle is equal to 1 degrees.
         Note that you will have undefined areas only if the image width is greater than the image height.
   command.Run(image);

   string destFileName = @"result.bmp";
   StorageFile saveFile = await Tools.AppLocalFolder.CreateFileAsync(destFileName);
   await codecs.SaveAsync(image, LeadStreamFactory.Create(saveFile), RasterImageFormat.Bmp, 24);
}

Requirements

Target Platforms

Reference