Saves a stamp in an existing file with specific options.
public void SaveStamp(
RasterImage image,
string fileName,
int firstPage,
int lastPage,
int firstSavePageNumber,
CodecsSavePageMode pageMode
)
Public Overloads Sub SaveStamp( _
ByVal image As RasterImage, _
ByVal fileName As String, _
ByVal firstPage As Integer, _
ByVal lastPage As Integer, _
ByVal firstSavePageNumber As Integer, _
ByVal pageMode As CodecsSavePageMode _
)
- (BOOL) saveStamp:(LTRasterImage *)image
file:(NSString *)file
firstPage:(NSInteger)firstPage
lastPage:(NSInteger)lastPage
firstSavePageNumber:(NSInteger)firstSavePageNumber
pageMode:(LTCodecsSavePageMode)pageMode
error:(NSError **)error
public:
void SaveStamp(
RasterImage^ image,
String^ fileName,
int firstPage,
int lastPage,
int firstSavePageNumber,
CodecsSavePageMode pageMode
)
image
The RasterImage object that contain the thumbnail (stamp) image.
fileName
A String containing the name of an existing image file.
firstPage
1-based index of the first page in image to save.
lastPage
1-based index of the last page in image to save. Pass -1 to save from firstPage to the last page in image.
firstSavePageNumber
1-based index of the first output page. If the output file already exists, then this parameter lets you control which pages to overwrite and/or where to append the new pages.
pageMode
Determines how to handle the page when saving to multipage formats. This can be one of the following:
Value | Meaning |
---|---|
CodecsSavePageMode.Append | Append the new page(s) to the end of the file. If the file does not exist, this option will create the file and add the pages to it. firstSavePageNumber is not used. |
CodecsSavePageMode.Insert | Insert the new page(s) at the index specified by firstSavePageNumber. |
CodecsSavePageMode.Replace | Replace the page(s) starting at the index specified by firstSavePageNumber. |
CodecsSavePageMode.Overwrite | Overwrite the page(s) starting at the index specified by firstSavePageNumber. |
The stamp will be written to last page in the file. If that page already has a stamp, it will be overwritten; If the file to which the stamp is being written does not exist, an exception will occur.
This method works for regular JPEG files and Exif JPEG files. For regular JPEG files, the stamp saved is always uncompressed and can be 8 or 24 bits per pixel. The stamp can be any width and height, but the stamp data and stamp header must completely fit in an APP0 marker. Therefore, the size must be less than 64k bytes (0xFFFF).
For Exif JPEG files, the stamps can be uncompressed or JPEG compressed and must be 24 bits per pixel. Exif JPEG stamps are supposed to be 160 x 120. However, LEADTOOLS can save and read Exif JPEG stamps of other dimensions. The stamp, along with other information such as the TIFF_HEADER, 0th IFD, 1st IFD, etc. must completely fit in an APP1 marker. Therefore, the size must be less than 64k bytes (0xFFFF).
NOTE: At this time, there are no multipage formats that support stamps.
This example will add a stamp to an existing file before reading it back
using Leadtools;
using Leadtools.Codecs;
using Leadtools.ImageProcessing;
using Leadtools.ImageProcessing.Color;
using Leadtools.Svg;
using LeadtoolsExamples.Common;
public void StampExample()
{
RasterCodecs codecs = new RasterCodecs();
string srcFileName = Path.Combine(LEAD_VARS.ImagesDir, "Image1.cmp");
string destFileName = Path.Combine(LEAD_VARS.ImagesDir, "Image1_WithCustomStamp.cmp");
string stampFileName = Path.Combine(LEAD_VARS.ImagesDir, "Image1_Stamp.bmp");
// Load the source file name
RasterImage image = codecs.Load(srcFileName);
// Save as the destination image
codecs.Save(image, destFileName, RasterImageFormat.Cmp, 24);
// Resize the image to fit into 128 by 128 pixels keeping the aspect ratio
LeadRect rc = new LeadRect(0, 0, 128, 128);
rc = RasterImage.CalculatePaintModeRectangle(
image.ImageWidth,
image.ImageHeight,
rc,
RasterPaintSizeMode.FitAlways,
RasterPaintAlignMode.Near,
RasterPaintAlignMode.Near);
SizeCommand command = new SizeCommand();
command.Width = rc.Width;
command.Height = rc.Height;
command.Flags = RasterSizeFlags.None;
command.Run(image);
// Add the word "Stamp" on the image at the middle
string message = "Stamp";
using (Leadtools.Drawing.RasterGraphics rg = Leadtools.Drawing.RasterImagePainter.CreateGraphics(image))
{
using (System.Drawing.StringFormat sf = new System.Drawing.StringFormat())
{
sf.Alignment = System.Drawing.StringAlignment.Center;
sf.LineAlignment = System.Drawing.StringAlignment.Center;
using (System.Drawing.Font f = new System.Drawing.Font("Arial", 20, System.Drawing.FontStyle.Bold))
{
System.Drawing.Rectangle rcDraw = new System.Drawing.Rectangle(rc.X, rc.Y, rc.Width, rc.Height);
rg.Graphics.DrawString(message, f, System.Drawing.Brushes.Yellow, rcDraw, sf);
}
}
}
// Now set this image as the stamp for this file
codecs.SaveStamp(image, destFileName, 1, 1, 1, CodecsSavePageMode.Overwrite);
image.Dispose();
// Load the stamp from the file and save it into another file
image = codecs.ReadStamp(destFileName, 1);
codecs.Save(image, stampFileName, RasterImageFormat.Bmp, 24);
image.Dispose();
// Clean up
codecs.Dispose();
}
static class LEAD_VARS
{
public const string ImagesDir = @"C:\Users\Public\Documents\LEADTOOLS Images";
}
Imports Leadtools
Imports Leadtools.Codecs
Imports Leadtools.ImageProcessing
Imports Leadtools.ImageProcessing.Color
Imports Leadtools.Drawing
Imports Leadtools.Svg
Public Sub StampExample()
Dim codecs As RasterCodecs = New RasterCodecs()
Dim srcFileName As String = Path.Combine(LEAD_VARS.ImagesDir, "Image1.cmp")
Dim destFileName As String = Path.Combine(LEAD_VARS.ImagesDir, "Image1_WithCustomStamp.cmp")
Dim stampFileName As String = Path.Combine(LEAD_VARS.ImagesDir, "Image1_Stamp.bmp")
' Load the source file name
Dim image As RasterImage = codecs.Load(srcFileName)
' Save as the destination image
codecs.Save(image, destFileName, RasterImageFormat.Cmp, 24)
' Resize the image to fit into 128 by 128 pixels keeping the aspect ratio
Dim rc As LeadRect = New LeadRect(0, 0, 128, 128)
rc = RasterImage.CalculatePaintModeRectangle(image.ImageWidth, image.ImageHeight, rc, RasterPaintSizeMode.FitAlways, RasterPaintAlignMode.Near, RasterPaintAlignMode.Near)
Dim command As SizeCommand = New SizeCommand()
command.Width = rc.Width
command.Height = rc.Height
command.Flags = RasterSizeFlags.None
command.Run(image)
' Add the word "Stamp" on the image at the middle
Dim message As String = "Stamp"
Using rg As RasterGraphics = RasterImagePainter.CreateGraphics(image)
Using sf As New System.Drawing.StringFormat()
sf.Alignment = System.Drawing.StringAlignment.Center
sf.LineAlignment = System.Drawing.StringAlignment.Center
Using f As New System.Drawing.Font("Arial", 20, System.Drawing.FontStyle.Bold)
Dim rcDraw As New System.Drawing.Rectangle(rc.X, rc.Y, rc.Width, rc.Height)
rg.Graphics.DrawString(message, f, System.Drawing.Brushes.Yellow, rcDraw, sf)
End Using
End Using
End Using
' Now set this image as the stamp for this file
codecs.SaveStamp(image, destFileName, 1, 1, 1, CodecsSavePageMode.Overwrite)
image.Dispose()
' Load the stamp from the file and save it into another file
image = codecs.ReadStamp(destFileName, 1)
codecs.Save(image, stampFileName, RasterImageFormat.Bmp, 24)
image.Dispose()
' Clean up
codecs.Dispose()
End Sub
Public NotInheritable Class LEAD_VARS
Public Const ImagesDir As String = "C:\Users\Public\Documents\LEADTOOLS Images"
End Class
c#[Silverlight C# Example]
using Leadtools;
using Leadtools.Codecs;
using Leadtools.Examples;
using Leadtools.ImageProcessing;
using Leadtools.ImageProcessing.Color;
using Leadtools.Windows.Media;
private void StampExample(RasterImage image, Stream outStreamFileWithStamp, Stream outStreamStampOnly)
{
RasterCodecs codecs = new RasterCodecs();
// Save as the destination image
codecs.Save(image, outStreamFileWithStamp, RasterImageFormat.Cmp, 24);
// Resize the image to fit into 128 by 128 pixels keeping the aspect ratio
LeadRect rc = new LeadRect(0, 0, 128, 128);
rc = RasterImage.CalculatePaintModeRectangle(
image.ImageWidth,
image.ImageHeight,
rc,
RasterPaintSizeMode.FitAlways,
RasterPaintAlignMode.Near,
RasterPaintAlignMode.Near);
SizeCommand command = new SizeCommand();
command.Width = rc.Width;
command.Height = rc.Height;
command.Flags = RasterSizeFlags.None;
command.Run(image);
// Add the word "Stamp" on the image at the middle
string message = "Stamp";
// To add "Stamp", we will create a WriteableBitmap from the RasterImage
// then add a canvas and a text block on top of it
// Create a writeable bitmap from the image source
WriteableBitmap bitmap = new WriteableBitmap(image.ImageWidth, image.ImageHeight);
// The white background canvas
Canvas canvas = new Canvas();
canvas.Width = image.ImageWidth;
canvas.Height = image.ImageHeight;
// Get the RasterImage as an ImageSource
ImageSource source = RasterImageConverter.ConvertToSource(image, ConvertToSourceOptions.UseSetSource);
// The image for the ImageSource
Image img = new Image();
img.Source = source;
// The black text block
TextBlock textBlock = new TextBlock();
textBlock.FontFamily = new FontFamily("Arial");
textBlock.FontSize = 20;
textBlock.Text = message;
textBlock.Foreground = new SolidColorBrush(Color.FromArgb(255, 0, 0, 0));
// Add the image source and the text block
canvas.Children.Add(img);
canvas.Children.Add(textBlock);
// Center the text
double left = (canvas.Width - textBlock.ActualWidth) / 2;
double top = (canvas.Height - textBlock.ActualHeight) / 2;
textBlock.SetValue(Canvas.LeftProperty, left);
textBlock.SetValue(Canvas.TopProperty, top);
// Render
bitmap.Render(canvas, null);
bitmap.Invalidate();
image.Dispose();
// Re-create the RasterImage from the WriteableBitmap
image = RasterImageConverter.ConvertFromSource(bitmap, ConvertFromSourceOptions.None);
// stamp has to be 24-bit, so convert it back
ColorResolutionCommand cmd = new ColorResolutionCommand();
cmd.BitsPerPixel = 24;
cmd.Run(image);
// This image contains the stamp, save it to the output stream
codecs.SaveStamp(image, outStreamFileWithStamp);
image.Dispose();
// Load the stamp from the file and save it to the other output stream
image = codecs.ReadStamp(outStreamFileWithStamp, 1);
codecs.Save(image, outStreamStampOnly, RasterImageFormat.Bmp, 24);
image.Dispose();
}
vb[Silverlight VB Example]
Imports Leadtools
Imports Leadtools.Codecs
Imports Leadtools.ImageProcessing
Imports Leadtools.ImageProcessing.Color
Imports Leadtools.Windows.Media
Private Sub StampExample(ByVal image As RasterImage, ByVal outStreamFileWithStamp As Stream, ByVal outStreamStampOnly As Stream)
Dim codecs As RasterCodecs = New RasterCodecs()
' Save as the destination image
codecs.Save(image, outStreamFileWithStamp, RasterImageFormat.Cmp, 24)
' Resize the image to fit into 128 by 128 pixels keeping the aspect ratio
Dim rc As LeadRect = New LeadRect(0, 0, 128, 128)
rc = RasterImage.CalculatePaintModeRectangle(image.ImageWidth, image.ImageHeight, rc, RasterPaintSizeMode.FitAlways, RasterPaintAlignMode.Near, RasterPaintAlignMode.Near)
Dim command As SizeCommand = New SizeCommand()
command.Width = rc.Width
command.Height = rc.Height
command.Flags = RasterSizeFlags.None
command.Run(image)
' Add the word "Stamp" on the image at the middle
Dim message As String = "Stamp"
' To add "Stamp", we will create a WriteableBitmap from the RasterImage
' then add a canvas and a text block on top of it
' Create a writeable bitmap from the image source
Dim bitmap As WriteableBitmap = New WriteableBitmap(image.ImageWidth, image.ImageHeight)
' The white background canvas
Dim canvas As Canvas = New Canvas()
canvas.Width = image.ImageWidth
canvas.Height = image.ImageHeight
' Get the RasterImage as an ImageSource
Dim source As ImageSource = RasterImageConverter.ConvertToSource(image, ConvertToSourceOptions.UseSetSource)
' The image for the ImageSource
Dim img As Image = New Image()
img.Source = source
' The black text block
Dim textBlock As TextBlock = New TextBlock()
textBlock.FontFamily = New FontFamily("Arial")
textBlock.FontSize = 20
textBlock.Text = message
textBlock.Foreground = New SolidColorBrush(Color.FromArgb(255, 0, 0, 0))
' Add the image source and the text block
canvas.Children.Add(img)
canvas.Children.Add(textBlock)
' Center the text
Dim left As Double = (canvas.Width - textBlock.ActualWidth) / 2
Dim top As Double = (canvas.Height - textBlock.ActualHeight) / 2
textBlock.SetValue(canvas.LeftProperty, left)
textBlock.SetValue(canvas.TopProperty, top)
' Render
bitmap.Render(canvas, Nothing)
bitmap.Invalidate()
image.Dispose()
' Re-create the RasterImage from the WriteableBitmap
image = RasterImageConverter.ConvertFromSource(bitmap, ConvertFromSourceOptions.None)
' stamp has to be 24-bit, so convert it back
Dim cmd As ColorResolutionCommand = New ColorResolutionCommand()
cmd.BitsPerPixel = 24
cmd.Run(image)
' This image contains the stamp, save it to the output stream
codecs.SaveStamp(image, outStreamFileWithStamp)
image.Dispose()
' Load the stamp from the file and save it to the other output stream
image = codecs.ReadStamp(outStreamFileWithStamp, 1)
codecs.Save(image, outStreamStampOnly, RasterImageFormat.Bmp, 24)
image.Dispose()
End Sub
Help Collections
Raster .NET | C API | C++ Class Library | HTML5 JavaScript
Document .NET | C API | C++ Class Library | HTML5 JavaScript
Medical .NET | C API | C++ Class Library | HTML5 JavaScript
Medical Web Viewer .NET
Multimedia
Direct Show .NET | C API | Filters
Media Foundation .NET | C API | Transforms
Supported Platforms
.NET, Java, Android, and iOS/macOS Assemblies
Imaging, Medical, and Document
C API/C++ Class Libraries
Imaging, Medical, and Document
HTML5 JavaScript Libraries
Imaging, Medical, and Document