←Select platform

GetDefaultOptions Method

Summary

Gets the default read options for a specified symbology.

Syntax

Java

Objective-C

WinRT C#

C++

public BarcodeReadOptions GetDefaultOptions( 
   BarcodeSymbology symbology 
)

Public Function GetDefaultOptions( _ 
   ByVal symbology As Leadtools.Barcode.BarcodeSymbology _ 
) As Leadtools.Barcode.BarcodeReadOptions

public Leadtools.Barcode.BarcodeReadOptions GetDefaultOptions(  
   Leadtools.Barcode.BarcodeSymbology symbology 
)

- (LTBarcodeReadOptions *)defaultOptionsForSymbology:(LTBarcodeSymbology)symbology

public BarcodeReadOptions getDefaultOptions(BarcodeSymbology symbology)

 function Leadtools.Barcode.BarcodeReader.GetDefaultOptions(  
   symbology  
)

public: 
Leadtools.Barcode.BarcodeReadOptions^ GetDefaultOptions(  
   Leadtools.Barcode.BarcodeSymbology symbology 
)

Parameters

symbology
An BarcodeSymbology enumeration member that specifies the barcode symbology (or type) to get its options.

Return Value

The BarcodeReadOptions derived object used by this BarcodeReader as the default read options to use when reading barcodes of the type specified in symbology.

Remarks

LEADTOOLS provides extra options to use when reading barcodes. These options are used to fine tune the parameters or provide extra pre-known information that are specific to certain types of barcodes. The base abstract class for the options is BarcodeReadOptions. LEADTOOLS provides derived classes for each symbology (or group of symbologies). Refer to BarcodeReadOptions for more information.

The BarcodeReader class contains default options for each barcode symbology (or group of common symbologies). These options can be retrieved using the GetDefaultOptions method passing the symbology of interest. You can then change the members of the returned BarcodeReadOptions (or after casting it to the appropriate derived class). These default options will be used by the BarcodeReader when the user calls the ReadBarcode and ReadBarcodes methods with no specific options (by either using versions of the method that do not take options as a parameter, pass null or Nothing for the options parameter for versions that accept options as a parameter, or finally if the options parameter array does not contain options class that is associated with a read barcode).

You can also create an instance of one of the derived BarcodeReadOptions classes and use it directly in ReadBarcode and ReadBarcodes methods that accept options as a parameter.

BarcodeSymbology.Unknown is a special type that is used to instruct the engine to read all barcodes. It does not have an associated read options class and should not be used in this method, otherwise, an exception will be thrown.

Example

This example shows how to get the default options used when reading standard linear 1D barcodes (UPC-A, UPC-E, etc) and changes them before reading the barcodes

Silverlight C#

Silverlight VB

using Leadtools; 
using Leadtools.Codecs; 
using Leadtools.Forms; 
using Leadtools.Barcode; 
using Leadtools.ImageProcessing; 
 
public void BarcodeReader_GetDefaultOptionsExample() 
{ 
   string imageFileName = Path.Combine(LEAD_VARS.ImagesDir, "Barcode1.tif"); 
 
   // Create a Barcode engine 
   BarcodeEngine engine = new BarcodeEngine(); 
 
   // Get the Barcode reader instance 
   BarcodeReader reader = engine.Reader; 
 
   // Load the image 
   using (RasterCodecs codecs = new RasterCodecs()) 
   { 
      using (RasterImage image = codecs.Load(imageFileName, 0, CodecsLoadByteOrder.BgrOrGray, 1, 1)) 
      { 
         // Rotate the image by 90, so default option of reading horizonal barcodes will not work 
         Console.WriteLine("Rotating the image by 90 degrees"); 
         RotateCommand rotate = new RotateCommand(90 * 100, RotateCommandFlags.Resize, RasterColor.FromKnownColor(RasterKnownColor.White)); 
         rotate.Run(image); 
 
         // Read a UPCA barcode from the image using default options 
         Console.WriteLine("Reading barcodes using default options"); 
         BarcodeData barcode = reader.ReadBarcode(image, LogicalRectangle.Empty, BarcodeSymbology.UPCA); 
 
         // Show its location and data if found 
         // This will print out "Not found" 
         if (barcode != null) 
         { 
            Console.WriteLine("Found a {0} barcode at {1}, data:\n{2}", barcode.Symbology, barcode.Bounds, barcode.Value); 
         } 
         else 
         { 
            Console.WriteLine("Not found"); 
         } 
 
         // Now set the default options for reading 1D barcodes to search for vertical barcodes and try again 
         OneDBarcodeReadOptions oneDReadOptions = reader.GetDefaultOptions(BarcodeSymbology.UPCA) as OneDBarcodeReadOptions; 
         oneDReadOptions.SearchDirection = BarcodeSearchDirection.Vertical; 
 
         // Read again 
         Console.WriteLine("Reading barcodes using new options"); 
         barcode = reader.ReadBarcode(image, LogicalRectangle.Empty, BarcodeSymbology.UPCA); 
 
         // Show its location and data if found 
         // This will find the barcode and print its information now 
         if (barcode != null) 
         { 
            Console.WriteLine("Found a {0} barcode at {1}, data:\n{2}", barcode.Symbology, barcode.Bounds, barcode.Value); 
         } 
         else 
         { 
            Console.WriteLine("Not found"); 
         } 
      } 
   } 
} 
 
static class LEAD_VARS 
{ 
   public const string ImagesDir = @"C:\Users\Public\Documents\LEADTOOLS Images"; 
}

Imports Leadtools 
Imports Leadtools.Codecs 
Imports Leadtools.Forms 
Imports Leadtools.Barcode 
Imports Leadtools.ImageProcessing 
 
Public Sub BarcodeReader_GetDefaultOptionsExample() 
   Dim imageFileName As String = Path.Combine(LEAD_VARS.ImagesDir, "Barcode1.tif") 
 
   ' Create a Barcode engine 
   Dim engine As New BarcodeEngine() 
 
   ' Get the Barcode reader instance 
   Dim reader As BarcodeReader = engine.Reader 
 
   ' Load the image 
   Using codecs As New RasterCodecs() 
      Using image As RasterImage = codecs.Load(imageFileName, 0, CodecsLoadByteOrder.BgrOrGray, 1, 1) 
         ' Rotate the image by 90, so default option of reading horizonal barcodes will not work 
         Console.WriteLine("Rotating the image by 90 degrees") 
         Dim rotate As New RotateCommand(90 * 100, RotateCommandFlags.Resize, RasterColor.FromKnownColor(RasterKnownColor.White)) 
         rotate.Run(image) 
 
         ' Read a UPCA barcode from the image using default options 
         Console.WriteLine("Reading barcodes using default options") 
         Dim barcode As BarcodeData = reader.ReadBarcode(image, LogicalRectangle.Empty, BarcodeSymbology.UPCA) 
 
         ' Show its location and data if found 
         ' This will print out "Not found" 
         If Not IsNothing(barcode) Then 
            Console.WriteLine("Found a {0} barcode at {1}, data:\n{2}", barcode.Symbology, barcode.Bounds, barcode.Value) 
         Else 
            Console.WriteLine("Not found") 
         End If 
 
         ' Now set the default options for reading 1D barcodes to search for vertical barcodes and try again 
         Dim oneDReadOptions As OneDBarcodeReadOptions = DirectCast(reader.GetDefaultOptions(BarcodeSymbology.UPCA), OneDBarcodeReadOptions) 
         oneDReadOptions.SearchDirection = BarcodeSearchDirection.Vertical 
 
         ' Read again 
         Console.WriteLine("Reading barcodes using new options") 
         barcode = reader.ReadBarcode(image, LogicalRectangle.Empty, BarcodeSymbology.UPCA) 
 
         ' Show its location and data if found 
         ' This will find the barcode and print its information now 
         If Not IsNothing(barcode) Then 
            Console.WriteLine("Found a {0} barcode at {1}, data:\n{2}", barcode.Symbology, barcode.Bounds, barcode.Value) 
         Else 
            Console.WriteLine("Not found") 
         End If 
      End Using 
   End Using 
End Sub 
 
Public NotInheritable Class LEAD_VARS 
   Public Const ImagesDir As String = "C:\Users\Public\Documents\LEADTOOLS Images" 
End Class

using Leadtools; 
using Leadtools.Codecs; 
using Leadtools.Forms; 
using Leadtools.Barcode; 
using Leadtools.ImageProcessing; 
using Leadtools.Examples; 
 
public void BarcodeReader_GetDefaultOptionsExample(RasterImage image) 
{ 
   // Create a Barcode engine 
   BarcodeEngine engine = new BarcodeEngine(); 
 
   // Get the Barcode reader instance 
   BarcodeReader reader = engine.Reader; 
 
   // Load the image 
   RasterCodecs codecs = new RasterCodecs(); 
 
   // Rotate the image by 90, so default option of reading horizonal barcodes will not work 
   Console.WriteLine("Rotating the image by 90 degrees"); 
   RotateCommand rotate = new RotateCommand(90 * 100, RotateCommandFlags.Resize, RasterColor.FromKnownColor(RasterKnownColor.White)); 
   rotate.Run(image); 
 
   // Read a UPCA barcode from the image using default options 
   Console.WriteLine("Reading barcodes using default options"); 
   BarcodeData barcode = reader.ReadBarcode(image, LogicalRectangle.Empty, BarcodeSymbology.UPCA); 
 
   // Show its location and data if found 
   // This will print out "Not found" 
   if (barcode != null) 
   { 
      Console.WriteLine("Found a {0} barcode at {1}, data:\n{2}", barcode.Symbology, barcode.Bounds, barcode.Value); 
   } 
   else 
   { 
      Console.WriteLine("Not found"); 
   } 
 
   // Now set the default options for reading 1D barcodes to search for vertical barcodes and try again 
   OneDBarcodeReadOptions oneDReadOptions = reader.GetDefaultOptions(BarcodeSymbology.UPCA) as OneDBarcodeReadOptions; 
   oneDReadOptions.SearchDirection = BarcodeSearchDirection.Vertical; 
 
   // Read again 
   Console.WriteLine("Reading barcodes using new options"); 
   barcode = reader.ReadBarcode(image, LogicalRectangle.Empty, BarcodeSymbology.UPCA); 
 
   // Show its location and data if found 
   // This will find the barcode and print its information now 
   if (barcode != null) 
   { 
      Console.WriteLine("Found a {0} barcode at {1}, data:\n{2}", barcode.Symbology, barcode.Bounds, barcode.Value); 
   } 
   else 
   { 
      Console.WriteLine("Not found"); 
   } 
}

Imports Leadtools 
Imports Leadtools.Codecs 
Imports Leadtools.Forms 
Imports Leadtools.Barcode 
Imports Leadtools.ImageProcessing 
Imports Leadtools.ImageProcessing.Color 
 
Public Sub BarcodeReader_GetDefaultOptionsExample(ByVal image As RasterImage) 
   ' Create a Barcode engine 
   Dim engine As BarcodeEngine = New BarcodeEngine() 
 
   ' Get the Barcode reader instance 
   Dim reader As BarcodeReader = engine.Reader 
 
   ' Load the image 
   Dim codecs As RasterCodecs = New RasterCodecs() 
 
   ' Rotate the image by 90, so default option of reading horizonal barcodes will not work 
   Console.WriteLine("Rotating the image by 90 degrees") 
   Dim rotate As RotateCommand = New RotateCommand(90 * 100, RotateCommandFlags.Resize, RasterColor.FromKnownColor(RasterKnownColor.White)) 
   rotate.Run(image) 
 
   ' Read a UPCA barcode from the image using default options 
   Console.WriteLine("Reading barcodes using default options") 
   Dim barcode As BarcodeData = reader.ReadBarcode(image, LogicalRectangle.Empty, BarcodeSymbology.UPCA) 
 
   ' Show its location and data if found 
   ' This will print out "Not found" 
   If Not barcode Is Nothing Then 
      Console.WriteLine("Found a {0} barcode at {1}, data:" & Constants.vbLf & "{2}", barcode.Symbology, barcode.Bounds, barcode.Value) 
   Else 
      Console.WriteLine("Not found") 
   End If 
 
   ' Now set the default options for reading 1D barcodes to search for vertical barcodes and try again 
   Dim oneDReadOptions As OneDBarcodeReadOptions = TryCast(reader.GetDefaultOptions(BarcodeSymbology.UPCA), OneDBarcodeReadOptions) 
   oneDReadOptions.SearchDirection = BarcodeSearchDirection.Vertical 
 
   ' Read again 
   Console.WriteLine("Reading barcodes using new options") 
   barcode = reader.ReadBarcode(image, LogicalRectangle.Empty, BarcodeSymbology.UPCA) 
 
   ' Show its location and data if found 
   ' This will find the barcode and print its information now 
   If Not barcode Is Nothing Then 
      Console.WriteLine("Found a {0} barcode at {1}, data:" & Constants.vbLf & "{2}", barcode.Symbology, barcode.Bounds, barcode.Value) 
   Else 
      Console.WriteLine("Not found") 
   End If 
End Sub

Requirements

Target Platforms

Reference

BarcodeReader Class

BarcodeReader Members

Help Version 19.0.2017.10.27

Leadtools.Barcode Assembly

Introduction

Getting Started

Namespaces

Leadtools.Barcode Namespace

Leadtools.Barcode.Deprecated Namespace

Assemblies