Help Version 19.0.2017.10.27
References ▼
#include "ltwrappr.h"
L_INT LImageViewerCell::SelectCell (bSelect, uFlags);
L_BOOL bSelect; |
selection flag |
L_UINT uFlags; |
reserved for future use |
Selects or deselects the cell at the specified index.
| Parameter | Description | |
| bSelect | Flag that indicates whether to select or deselect the cell at the specified index. Possible values are: | |
| Value | Meaning | |
| TRUE | Select the cell at the specified index. | |
| FALSE | Deselect the cell at the specified index. | |
| uFlags | Flags that determine whether to apply the feature on the one cell only, or more than one cell. This value can only be used when the cell is attached to the LImageViewer through the function LImageViewer::InsertCell. Possible values are: | |
| Value | Meaning | |
| CELL_APPLYTOTHIS | [0x00000000] Apply the feature to this cell only. | |
| CELL_APPLYTOALL | [0x10000000] Apply the feature to all the cells in the Image Viewer. | |
| CELL_APPLYTOSELECTED | [0x20000000] Apply the feature to the selected cells in the Image Viewer. | |
SUCCESS |
The function was successful. |
< 1 |
An error occurred. Refer to Return Codes. |
Required DLLs and Libraries
LTIVW For a listing of the exact DLLs and Libraries needed, based on the toolkit version, refer to Files To Be Included With Your Application. |
The following example toggles the selection state:
L_INT LImageViewer_SelectCellExample(LImageViewer& ImageViewer){// Get the cell countL_INT nCount = ImageViewer.GetCellCount(0);L_INT nI;L_INT nRet = 0 ;LImageViewerCell * imageViewerCell;// if there is a selected cell, make it unselected and vice versafor (nI = 0; nI < nCount; nI++){imageViewerCell = ImageViewer.GetCellHandle(nI, 0);nRet = imageViewerCell->SelectCell(!imageViewerCell->IsCellSelected(0), 0);if(nRet != SUCCESS)return nRet;}return SUCCESS;}