Initializes a new ApplyTransformationParametersCommand class object with default parameters.
public ApplyTransformationParametersCommand()
Public Function New()
- (instancetype)init
public ApplyTransformationParametersCommand()
public:
ApplyTransformationParametersCommand();
This example computes the translation parameters. The example makes the assumption that you have saved the position of the registration marks of the reference image in a file. Modify this example and replace the manual assignment of the rmData with your own code to load the reference registration mark data before testing this example.
using Leadtools;
using Leadtools.Codecs;
using Leadtools.ImageProcessing.Core;
public void ApplyTransformationParametersConstructorExample()
{
// Load an image
RasterCodecs codecs = new RasterCodecs();
codecs.ThrowExceptionsOnInvalidImages = true;
RasterImage image = codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "RGSRef.cmp"));
// Prepare the command
RasterImage tempImage = image;
try
{
tempImage = image.Clone();
if (tempImage.HasRegion)
tempImage.MakeRegionEmpty();
if (image.HasRegion)
image.MakeRegionEmpty();
SearchRegistrationMarksCommandData[] rmData = new SearchRegistrationMarksCommandData[3];
// Mark1
rmData[0] = new SearchRegistrationMarksCommandData();
rmData[0].Rectangle = new LeadRect(680, 20, 941 - 680, 218 - 20);
rmData[0].MarkDetectedPoints = new LeadPoint[1];
rmData[0].Width = 31;
rmData[0].Height = 29;
rmData[0].Type = RegistrationMarkCommandType.TShape;
rmData[0].MinimumScale = 90;
rmData[0].MaximumScale = 110;
rmData[0].SearchMarkCount = 1;
// Mark2
rmData[1] = new SearchRegistrationMarksCommandData();
rmData[1].Rectangle = new LeadRect(665, 790, 899 - 665, 961 - 790);
rmData[1].MarkDetectedPoints = new LeadPoint[1];
rmData[1].Width = 31;
rmData[1].Height = 29;
rmData[1].Type = RegistrationMarkCommandType.TShape;
rmData[1].MinimumScale = 90;
rmData[1].MaximumScale = 110;
rmData[1].SearchMarkCount = 1;
// Mark3
rmData[2] = new SearchRegistrationMarksCommandData(31, 29, 90, 110, new LeadRect(7, 1073, 298 - 7, 1246 - 1073), 1, new LeadPoint[1], RegistrationMarkCommandType.TShape);
SearchRegistrationMarksCommand command1 = new SearchRegistrationMarksCommand();
command1.SearchMarks = rmData;
command1.Run(image);
if ((rmData[2].MarkDetectedCount != 1) || (rmData[1].MarkDetectedCount != 1) || (rmData[0].MarkDetectedCount != 1))
return;
LeadPoint[] original =
{
new LeadPoint(81400, 11300),
new LeadPoint(78600, 87400),
new LeadPoint(14300, 115400)
};
LeadPoint[] detected =
{
rmData[0].MarkDetectedPoints[0],
rmData[1].MarkDetectedPoints[0],
rmData[2].MarkDetectedPoints[0]
};
// Find center of mass for detected registration marks in the transformed image
LeadPoint[] transformed = CoreUtilities.GetRegistrationMarksCenterMass(image, detected);
// Find transformation parameters
TransformationParameters parameters = CoreUtilities.GetTransformationParameters(image, original, transformed);
// Apply transformation parameters to correct the image
ApplyTransformationParametersCommand applyCommand = new ApplyTransformationParametersCommand();
applyCommand.XTranslation = parameters.XTranslation;
applyCommand.YTranslation = parameters.YTranslation;
applyCommand.Angle = parameters.Angle;
applyCommand.XScale = parameters.XScale;
applyCommand.YScale = parameters.YScale;
applyCommand.Flags = ApplyTransformationParametersCommandFlags.Normal;
applyCommand.Run(tempImage);
}
catch (Exception exception)
{
MessageBox.Show(exception.Message);
}
}
static class LEAD_VARS
{
public const string ImagesDir = @"C:\Users\Public\Documents\LEADTOOLS Images";
}
Imports Leadtools
Imports Leadtools.Codecs
Imports Leadtools.ImageProcessing.Core
Public Sub ApplyTransformationParametersConstructorExample()
Dim codecs As New RasterCodecs()
codecs.ThrowExceptionsOnInvalidImages = True
Dim leadImage As RasterImage = codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "RGSRef.cmp"))
' Prepare the command
Dim tempImage As RasterImage
tempImage = leadImage
Try
tempImage = leadImage.Clone()
If (tempImage.HasRegion) Then
tempImage.MakeRegionEmpty()
End If
If (leadImage.HasRegion) Then
leadImage.MakeRegionEmpty()
End If
Dim rmData() As SearchRegistrationMarksCommandData
ReDim rmData(2)
Dim points() As LeadPoint
ReDim points(0)
' Mark1
rmData(0) = New SearchRegistrationMarksCommandData
rmData(0).Rectangle = New LeadRect(680, 20, 941 - 680, 218 - 20)
rmData(0).MarkDetectedPoints = points
rmData(0).Width = 31
rmData(0).Height = 29
rmData(0).Type = RegistrationMarkCommandType.TShape
rmData(0).MinimumScale = 90
rmData(0).MaximumScale = 110
rmData(0).SearchMarkCount = 1
' Mark2
rmData(1) = New SearchRegistrationMarksCommandData
rmData(1).Rectangle = New LeadRect(665, 790, 899 - 665, 961 - 790)
rmData(1).MarkDetectedPoints = points
rmData(1).Width = 31
rmData(1).Height = 29
rmData(1).Type = RegistrationMarkCommandType.TShape
rmData(1).MinimumScale = 90
rmData(1).MaximumScale = 110
rmData(1).SearchMarkCount = 1
' Mark3
rmData(2) = New SearchRegistrationMarksCommandData(31, 29, 90, 110, New LeadRect(7, 1073, 298 - 7, 1246 - 1073), 1, points, RegistrationMarkCommandType.TShape)
Dim command1 As SearchRegistrationMarksCommand
command1 = New SearchRegistrationMarksCommand
command1.SearchMarks = rmData
command1.Run(leadImage)
If ((rmData(2).MarkDetectedCount <> 1) OrElse (rmData(1).MarkDetectedCount <> 1) OrElse (rmData(0).MarkDetectedCount <> 1)) Then
Return
End If
Dim original() As LeadPoint
ReDim original(2)
original(0) = New LeadPoint(81400, 11300)
original(1) = New LeadPoint(78600, 87400)
original(2) = New LeadPoint(14300, 115400)
Dim detected() As LeadPoint
ReDim detected(2)
detected(0) = rmData(0).MarkDetectedPoints(0)
detected(1) = rmData(1).MarkDetectedPoints(0)
detected(2) = rmData(2).MarkDetectedPoints(0)
' Find center of mass for detected registration marks in the transformed image
Dim transformed() As LeadPoint
transformed = CoreUtilities.GetRegistrationMarksCenterMass(leadImage, detected)
' Find transformation parameters
Dim parameters As TransformationParameters
parameters = CoreUtilities.GetTransformationParameters(leadImage, original, transformed)
' Apply transformatin parameters to correct the image
Dim applyCommand As ApplyTransformationParametersCommand
applyCommand = New ApplyTransformationParametersCommand
applyCommand.XTranslation = parameters.XTranslation
applyCommand.YTranslation = parameters.YTranslation
applyCommand.Angle = parameters.Angle
applyCommand.XScale = parameters.XScale
applyCommand.YScale = parameters.YScale
applyCommand.Flags = ApplyTransformationParametersCommandFlags.Normal
applyCommand.Run(tempImage)
Catch e As Exception
MessageBox.Show(e.Message)
End Try
End Sub
Public NotInheritable Class LEAD_VARS
Public Const ImagesDir As String = "C:\Users\Public\Documents\LEADTOOLS Images"
End Class
c#[Silverlight C# Example]
using Leadtools;
using Leadtools.Examples;
using Leadtools.Codecs;
using Leadtools.ImageProcessing.Core;
public void ApplyTransformationParametersConstructorExample(RasterImage image, Stream outStream)
{
// Prepare the command
RasterImage tempImage = image;
tempImage = image.Clone();
if (tempImage.HasRegion)
tempImage.MakeRegionEmpty();
if (image.HasRegion)
image.MakeRegionEmpty();
// Apply transformatin parameters to correct the image
ApplyTransformationParametersCommand applyCommand = new ApplyTransformationParametersCommand();
applyCommand.XTranslation = 10;
applyCommand.YTranslation = 10;
applyCommand.Angle = 500;
applyCommand.XScale = 1;
applyCommand.YScale = 2;
applyCommand.Flags = ApplyTransformationParametersCommandFlags.Normal;
applyCommand.Run(tempImage);
// Save result image
RasterCodecs codecs = new RasterCodecs();
codecs.Save(image, outStream, RasterImageFormat.DicomGray, image.BitsPerPixel);
image.Dispose();
}
vb[Silverlight VB Example]
Imports Leadtools
Imports Leadtools.Codecs
Imports Leadtools.ImageProcessing.Core
Public Sub ApplyTransformationParametersConstructorExample(ByVal image As RasterImage, ByVal outStream As Stream)
' Prepare the command
Dim tempImage As RasterImage = image
tempImage = image.Clone()
If tempImage.HasRegion Then
tempImage.MakeRegionEmpty()
End If
If image.HasRegion Then
image.MakeRegionEmpty()
End If
' Apply transformatin parameters to correct the image
Dim applyCommand As ApplyTransformationParametersCommand = New ApplyTransformationParametersCommand()
applyCommand.XTranslation = 10
applyCommand.YTranslation = 10
applyCommand.Angle = 500
applyCommand.XScale = 1
applyCommand.YScale = 2
applyCommand.Flags = ApplyTransformationParametersCommandFlags.Normal
applyCommand.Run(tempImage)
' Save result image
Dim codecs As RasterCodecs = New RasterCodecs()
codecs.Save(image, outStream, RasterImageFormat.DicomGray, image.BitsPerPixel)
image.Dispose()
End Sub
ApplyTransformationParametersCommand Class
Help Collections
Raster .NET | C API | C++ Class Library | HTML5 JavaScript
Document .NET | C API | C++ Class Library | HTML5 JavaScript
Medical .NET | C API | C++ Class Library | HTML5 JavaScript
Medical Web Viewer .NET
Multimedia
Direct Show .NET | C API | Filters
Media Foundation .NET | C API | Transforms
Supported Platforms
.NET, Java, Android, and iOS/macOS Assemblies
Imaging, Medical, and Document
C API/C++ Class Libraries
Imaging, Medical, and Document
HTML5 JavaScript Libraries
Imaging, Medical, and Document