This is the interface for the LEAD AC3 Encoder.
typedef enum
{
LEncAC3_APILEVEL_1,
} LEncAC3_APILEVEL;
Lists the valid values for the ApiLevel parameter that can be passed to the ResetToDefaultsEx method.
LEncAC3_APILEVEL_1 | Use the defaults from the current version of the codec. |
enum
{
LENCAC3_UNCHANGED = 0,
LENCAC3_FORCE_MONO = 1,
LENCAC3_FORCE_STEREO = 2,
LENCAC3_FORCE_6CHANNELS = 6
} eAC3OutputChannels;
Type |
Name |
Description |
long |
OutputBitrate |
Sets the output bitrate of the compressed audio data. The bitrate is the average number of bits that one second of audio data will take up in the compressed bitstream. The bitrate represents the strength of compression. It also influences quality: the higher the bitrate, the higher the quality. The unit of measure for the bitrate is in kbps. To calculate the number of bytes per second of audio data, divide the bitrate value by eight. The following bitrate values are valid: {32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320, 384, 448, 512, 576, 640}. |
OutputChannelsFlag |
An enumeration that specifies the number of output channels. The following values are possible: LENCAC3_UNCHANGED: The number of output channels equals the number of input channels. |
|
BOOL |
SimulateSurround |
Enables or disables surround sound simulation. The following values are possible: TRUE: Enables surround sound simulation. FALSE: Disables surround sound simulation. This property is used only if the LENCAC3_FORCE_6CHANNELS eAC3OutputChannels value is selected. |
long | OutputSampleRate | The output sample rate, in samples per second (Hz). The following values are possible: {32000, 44100, 48000}. |
ApiLevel | Specifies which defaults should be used by the filter. |
Resets the filter to default values. The ApiLevel parameter determines which default values to use. Current applications should set ApiLevel to LEncAC3_APILEVEL_1 = 0. The filter might change in the future and have different properties or default behaviour. Calling this method ensures future versions of the filter will behave the same way as when the application was developed. It is best to call ResetToDefaultsEx(LEncAC3_APILEVEL_1) before you start setting properties and start calling other methods for this interface.
S_OK if successful, < 0 if an error occurred.
E_INVALIDARG |
The ApiLevel parameter is invalid. |
Resets the filter properties to their default values. Calling this method can cause the filter to reconnect its output pin.
The default values are:
ForceOutChannels = LENCAC3_UNCHANGED
SimulateSurround = FALSE
OutputBitrate = 192
OutputSampleRate = 0
S_OK if successful, < 0 if an error occurred.
VFW_E_WRONG_STATE |
The filter is in the wrong state. |