References ▼
#include "ltwrappr.h"
virtual L_INT LDialogColor::DoModalWindowLevel (hWndOwner)
Brings up the Window Level dialog box, and gets the options for LBitmap::WindowLevel. This function is available in the MedicalMedical toolkits.
Handle of the window which owns the dialog.
| Value | Meaning |
|---|---|
| SUCCESS_DLG_OK | The "OK" button was pressed, and the dialog exited successfully. |
| SUCCESS_DLG_CANCEL | The "Cancel" button was pressed, and the dialog exited successfully. |
| < 1 | An error occurred. Refer to Return Codes. |
✎ NOTE
This dialog only works for 12 or 16 bit grayscale images. Trying to use this dialog with other images will result in an error.
You must allocate the memory for the LUT before calling this function. You can calculate the required size with (sizeof(RGBQUAD) * (1<<(nHighBit - nLowBit + 1))), you can get the nHighBit and nLowBit values by using LBitmap::GetMinMaxBits function as seen in the example below.
For example, suppose you are working with a 12 bit grayscale image. There are 4096 intensity levels in a 12 bit image (2 raised to the 12th power). Normally, the interval between 0 and 4095 would be mapped to colors between (0, 0, 0) and (255, 255, 255). With this function, any value that falls between the low level and the high level will be mapped to colors between the start color and the end color. If you do not want a gradient, set the start and end colors equal.
Required DLLs and Libraries
L_INT LDialogColor_DoModalWindowLevelExample(LBitmap * pBitmap, HWND hWnd){L_INT nRet;L_INT nSize = 0 ;LDialogColor DlgColor;nRet = DlgColor.Initialize(DLG_INIT_COLOR );if(nRet != SUCCESS)return nRet;DlgColor.SetBitmap(pBitmap);L_INT nHighBit,nLowBit;nHighBit = 0;nLowBit = 0;nRet = pBitmap->GetMinMaxBits (&nLowBit,&nHighBit);if(nRet != SUCCESS)return nRet;nSize = ( L_UINT32 ) ( 1L<< ( nHighBit - nLowBit + 1 ) ) ;WINDOWLEVELDLGPARAMS DlgParams;memset ( &DlgParams, 0, sizeof ( WINDOWLEVELDLGPARAMS ) ) ;DlgParams.uStructSize = sizeof ( WINDOWLEVELDLGPARAMS ) ;DlgParams.pLUT = ( RGBQUAD * ) malloc ( ( nSize * sizeof ( RGBQUAD ) ) ) ;DlgParams.uLUTLength = ( L_UINT32 ) nSize ;DlgParams.uLowBit = nLowBit;DlgParams.uHighBit = nHighBit;DlgParams.nLow = nLowBit;DlgParams.nHigh = 1<<(nHighBit - nLowBit + 1);DlgParams.crStart = RGB(255,0,0);DlgParams.crEnd = RGB(0,0,255);DlgParams.nFactor = 10;DlgParams.uWindowLevelFlags = FILLLUT_INSIDE|FILLLUT_LOGARITHMIC;DlgParams.uDlgFlags = DLG_WINDOWLEVEL_SHOW_RANGE ;DlgColor.EnableCallBack (FALSE);DlgColor.EnablePreview(TRUE);DlgColor.EnableAutoProcess(TRUE);DlgColor.EnableToolbar(TRUE);nRet = DlgColor.SetWindowLevelParams(&DlgParams) ;if(nRet != SUCCESS)return nRet;nRet = DlgColor.DoModalWindowLevel(hWnd);if(nRet < 1)return nRet;// Gets the updated values for the structurenRet = DlgColor.GetWindowLevelParams(&DlgParams, sizeof(DlgParams)) ;if(nRet != SUCCESS)return nRet;nRet = DlgColor.Free ();if(nRet != SUCCESS)return nRet;free(DlgParams.pLUT);return SUCCESS;}