AnnPolylineObject Object

Summary

Defines an annotation polyline object.

Syntax
TypeScript
JavaScript
function lt.Annotations.Engine.AnnPolylineObject 
	extends lt.Annotations.Engine.AnnObject 
	implements IAnnObjectCloneable 
class lt.Annotations.Engine.AnnPolylineObject() 
	extends AnnObject 
	implements IAnnObjectCloneable 
Remarks

The polyline object is a simple polyline that contains a collection of LeadPointD points and a stroke

With the automated functions, on systems with mouse support, each line segment is formed with a mouse click, and the object is completed on a double-click.

With the automated functions, on systems with touch support, the first line segment starts with the first tap and hold. Each successive tap and hold, hold for 1.5 seconds, results in a new line segment. The object is completed by the user removing the finger from the device.

Programmatically, the boundaries and location of the polyline object can be controlled using the following properties:

Each object can be transformed with the following methods:

The AnnPolylineObject class inherits a number of properties from the AnnObject class, providing support for font, stroke and fill characteristics. These properties are listed below:

The name of the polyline object can be controlled using Labels property, inherited from the AnnObject class. An object can be part of a group annotation object or part of a container object. It cannot be part of both a group and a container at the same time. The following properties can also be used to programmatically set characteristics of an AnnPolylineObject:

Example

This example creates a polyline object and adds it to the automation container.

AnnPolyline.ts
EngineHelper.ts
AnnPolyline.js
EngineHelper.js
AnnPolyline.html
import { EngineHelper } from "../../utilities/EngineHelper"; 
 
export class AnnObjects_Polyline { 
   constructor() { 
      const helper = new EngineHelper(); 
      helper.run(this.create); 
   } 
 
   create = (automation: lt.Annotations.Automation.AnnAutomation) => { 
      const inch: number = 720.0; 
      // Add a freehand hotspot object 
      const polyLineObj: lt.Annotations.Engine.AnnPolylineObject = new lt.Annotations.Engine.AnnPolylineObject(); 
      // Set the points for the freehand hotspot 
      polyLineObj.points.add(lt.LeadPointD.create(1 * inch, 1 * inch)); 
      polyLineObj.points.add(lt.LeadPointD.create(2 * inch, 2 * inch)); 
      polyLineObj.points.add(lt.LeadPointD.create(1 * inch, 5 * inch)); 
      polyLineObj.points.add(lt.LeadPointD.create(5 * inch, 5 * inch)); 
      polyLineObj.points.add(lt.LeadPointD.create(4 * inch, 2 * inch)); 
      polyLineObj.points.add(lt.LeadPointD.create(5 * inch, 1 * inch)); 
      // Set the stroke 
      polyLineObj.stroke = lt.Annotations.Engine.AnnStroke.create(lt.Annotations.Engine.AnnSolidColorBrush.create("red"), lt.LeadLengthD.create(3)); 
      // Set the fill 
      polyLineObj.fill = lt.Annotations.Engine.AnnSolidColorBrush.create("green"); 
      // Set the figure to closed 
      polyLineObj.isClosed = true; 
      // Add the object to the automation container 
      automation.container.children.add(polyLineObj); 
      // Select the object 
      automation.selectObject(polyLineObj); 
   } 
} 
export class EngineHelper { 
   // Automation object 
   protected _automation: lt.Annotations.Automation.AnnAutomation = null; 
   // Image viewer 
   protected _viewer: lt.Controls.ImageViewer = null; 
 
   constructor() { 
      // Set the LEADTOOLS license. Replace this with your actual license file 
      lt.RasterSupport.setLicenseUri("https://demo.leadtools.com/licenses/js/LEADTOOLSEVAL.txt", "EVAL", null); 
   } 
 
   public run(callback?: (automation: lt.Annotations.Automation.AnnAutomation, viewer: lt.Controls.ImageViewer) => void): void { 
      // Create the viewer 
      const imageViewerDiv = document.getElementById("imageViewerDiv"); 
      const createOptions: lt.Controls.ImageViewerCreateOptions = new lt.Controls.ImageViewerCreateOptions(imageViewerDiv); 
      const viewer: lt.Controls.ImageViewer = new lt.Controls.ImageViewer(createOptions); 
      viewer.autoCreateCanvas = true; 
      this._viewer = viewer; 
 
      // PanZoom interactive mode 
      const panZoom: lt.Controls.ImageViewerPanZoomInteractiveMode = new lt.Controls.ImageViewerPanZoomInteractiveMode(); 
 
      // Create an instance of the Automation control object that works with LEADTOOLS ImageViewer 
      const imageViewerAutomationControl: lt.Demos.Annotations.ImageViewerAutomationControl = new lt.Demos.Annotations.ImageViewerAutomationControl(); 
      // Attach our image viewer 
      imageViewerAutomationControl.imageViewer = viewer; 
 
      // Set the image viewer interactive mode 
      const automationInteractiveMode: lt.Demos.Annotations.AutomationInteractiveMode = new lt.Demos.Annotations.AutomationInteractiveMode(); 
      automationInteractiveMode.automationControl = imageViewerAutomationControl; 
 
      // Set the image URL 
      viewer.imageUrl = "http://demo.leadtools.com/images/png/pngimage.png"; 
 
      // Create and set up the automation manager using the HTML5 rendering engine 
      const renderingEngine: lt.Annotations.Rendering.AnnHtml5RenderingEngine = new lt.Annotations.Rendering.AnnHtml5RenderingEngine(); 
      const manager: lt.Annotations.Automation.AnnAutomationManager = lt.Annotations.Automation.AnnAutomationManager.create(renderingEngine); 
 
      // Create default automation objects 
      manager.createDefaultObjects(); 
 
      // Add the objects to the objects select element 
      const currentObjectIdSelect = document.getElementById("currentObjectIdSelect") as HTMLSelectElement; 
      // Add the PanZoom option 
      currentObjectIdSelect.options[currentObjectIdSelect.options.length] = new Option("Pan/Zoom", lt.Annotations.Engine.AnnObject.none.toString()); 
 
      const automationObjCount: number = manager.objects.count; 
      for (let i = 0; i < automationObjCount; i++) { 
         // Get the object 
         const automationObj: lt.Annotations.Automation.AnnAutomationObject = manager.objects.item(i); 
 
         // Add its name to the select element 
         const name: string = automationObj.name; 
         const id: string = automationObj.id.toString(); 
         currentObjectIdSelect.options[currentObjectIdSelect.options.length] = new Option(name, id); 
      } 
 
      // Hook to its change event 
      currentObjectIdSelect.addEventListener("change", () => { 
         // Get the object ID 
         const id: number = parseInt(currentObjectIdSelect.options[currentObjectIdSelect.selectedIndex].value); 
 
         // Set it as the current object in the manager 
         manager.currentObjectId = id; 
 
         // If this is the "Pan/Zoom" option, then back to pan zoom, otherwise, set our automation control 
         if (id == lt.Annotations.Engine.AnnObject.none) { 
            viewer.defaultInteractiveMode = panZoom; 
         } 
         else { 
            viewer.defaultInteractiveMode = automationInteractiveMode; 
         } 
      }); 
 
      // When the current object ID changes, we need to update our select 
      manager.add_currentObjectIdChanged((sender, e) => { 
         const currentObjectId: number = manager.currentObjectId; 
         for (let i = 0; i < currentObjectIdSelect.options.length; i++) { 
            const id: number = parseInt(currentObjectIdSelect.options[i].value); 
            if (id === currentObjectId) { 
               currentObjectIdSelect.selectedIndex = i; 
               break; 
            } 
         } 
      }); 
 
      // Pan zoom by default 
      viewer.defaultInteractiveMode = panZoom; 
 
      // set up the automation (will create the container as well) 
      const automation: lt.Annotations.Automation.AnnAutomation = new lt.Annotations.Automation.AnnAutomation(manager, imageViewerAutomationControl); 
      this._automation = automation; 
 
      // Add handler to update the container size when the image size changes 
      viewer.itemChanged.add((sender, e) => { 
         const container: lt.Annotations.Engine.AnnContainer = automation.container; 
         container.size = container.mapper.sizeToContainerCoordinates(viewer.imageSize); 
 
         //Create new canvas data provider for the new image 
         const canvasDataProvider: lt.Demos.Annotations.CanvasDataProvider = new lt.Demos.Annotations.CanvasDataProvider(viewer.activeItem.canvas); 
         imageViewerAutomationControl.automationDataProvider = canvasDataProvider; 
 
      }); 
 
      // set up this automation as the active one 
      this._automation.active = true; 
 
      const exampleButton = document.getElementById("exampleButton"); 
      exampleButton.onclick = () => { 
         if(callback) 
            callback(this._automation, this._viewer); 
      } 
   } 
} 
import { EngineHelper } from "../../utilities/EngineHelper"; 
 
export class AnnObjects_Polyline { 
   constructor() { 
      const helper = new EngineHelper(); 
      helper.run(this.create); 
   } 
 
   create = (automation) => { 
      const inch = 720.0; 
      // Add a freehand hotspot object 
      const polyLineObj = new lt.Annotations.Engine.AnnPolylineObject(); 
      // Set the points for the freehand hotspot 
      polyLineObj.points.add(lt.LeadPointD.create(1 * inch, 1 * inch)); 
      polyLineObj.points.add(lt.LeadPointD.create(2 * inch, 2 * inch)); 
      polyLineObj.points.add(lt.LeadPointD.create(1 * inch, 5 * inch)); 
      polyLineObj.points.add(lt.LeadPointD.create(5 * inch, 5 * inch)); 
      polyLineObj.points.add(lt.LeadPointD.create(4 * inch, 2 * inch)); 
      polyLineObj.points.add(lt.LeadPointD.create(5 * inch, 1 * inch)); 
      // Set the stroke 
      polyLineObj.stroke = lt.Annotations.Engine.AnnStroke.create(lt.Annotations.Engine.AnnSolidColorBrush.create("red"), lt.LeadLengthD.create(3)); 
      // Set the fill 
      polyLineObj.fill = lt.Annotations.Engine.AnnSolidColorBrush.create("green"); 
      // Set the figure to closed 
      polyLineObj.isClosed = true; 
      // Add the object to the automation container 
      automation.container.children.add(polyLineObj); 
      // Select the object 
      automation.selectObject(polyLineObj); 
   } 
} 
export class EngineHelper { 
   // Automation object 
   _automation = null; 
   // Image viewer 
   _viewer = null; 
 
   constructor() { 
      // Set the LEADTOOLS license. Replace this with your actual license file 
      lt.RasterSupport.setLicenseUri("https://demo.leadtools.com/licenses/js/LEADTOOLSEVAL.txt", "EVAL", null); 
   } 
 
   run(callback) { 
      // Create the viewer 
      const imageViewerDiv = document.getElementById("imageViewerDiv"); 
      const createOptions = new lt.Controls.ImageViewerCreateOptions(imageViewerDiv); 
      const viewer = new lt.Controls.ImageViewer(createOptions); 
      viewer.autoCreateCanvas = true; 
      this._viewer = viewer; 
 
      // PanZoom interactive mode 
      const panZoom = new lt.Controls.ImageViewerPanZoomInteractiveMode(); 
 
      // Create an instance of the Automation control object that works with LEADTOOLS ImageViewer 
      const imageViewerAutomationControl = new lt.Demos.Annotations.ImageViewerAutomationControl(); 
      // Attach our image viewer 
      imageViewerAutomationControl.imageViewer = viewer; 
 
      // Set the image viewer interactive mode 
      const automationInteractiveMode = new lt.Demos.Annotations.AutomationInteractiveMode(); 
      automationInteractiveMode.automationControl = imageViewerAutomationControl; 
 
      // Set the image URL 
      viewer.imageUrl = "http://demo.leadtools.com/images/png/pngimage.png"; 
 
      // Create and set up the automation manager using the HTML5 rendering engine 
      const renderingEngine = new lt.Annotations.Rendering.AnnHtml5RenderingEngine(); 
      const manager = lt.Annotations.Automation.AnnAutomationManager.create(renderingEngine); 
 
      // Create default automation objects 
      manager.createDefaultObjects(); 
 
      // Add the objects to the objects select element 
      const currentObjectIdSelect = document.getElementById("currentObjectIdSelect"); 
      // Add the PanZoom option 
      currentObjectIdSelect.options[currentObjectIdSelect.options.length] = new Option("Pan/Zoom", lt.Annotations.Engine.AnnObject.none.toString()); 
 
      const automationObjCount = manager.objects.count; 
      for (let i = 0; i < automationObjCount; i++) { 
         // Get the object 
         const automationObj = manager.objects.item(i); 
 
         // Add its name to the select element 
         const name = automationObj.name; 
         const id = automationObj.id.toString(); 
         currentObjectIdSelect.options[currentObjectIdSelect.options.length] = new Option(name, id); 
      } 
 
      // Hook to its change event 
      currentObjectIdSelect.addEventListener("change", () => { 
         // Get the object ID 
         const id = parseInt(currentObjectIdSelect.options[currentObjectIdSelect.selectedIndex].value); 
 
         // Set it as the current object in the manager 
         manager.currentObjectId = id; 
 
         // If this is the "Pan/Zoom" option, then back to pan zoom, otherwise, set our automation control 
         if (id == lt.Annotations.Engine.AnnObject.none) { 
            viewer.defaultInteractiveMode = panZoom; 
         } 
         else { 
            viewer.defaultInteractiveMode = automationInteractiveMode; 
         } 
      }); 
 
      // When the current object ID changes, we need to update our select 
      manager.add_currentObjectIdChanged((sender, e) => { 
         const currentObjectId = manager.currentObjectId; 
         for (let i = 0; i < currentObjectIdSelect.options.length; i++) { 
            const id = parseInt(currentObjectIdSelect.options[i].value); 
            if (id === currentObjectId) { 
               currentObjectIdSelect.selectedIndex = i; 
               break; 
            } 
         } 
      }); 
 
      // Pan zoom by default 
      viewer.defaultInteractiveMode = panZoom; 
 
      // set up the automation (will create the container as well) 
      const automation = new lt.Annotations.Automation.AnnAutomation(manager, imageViewerAutomationControl); 
      this._automation = automation; 
 
      // Add handler to update the container size when the image size changes 
      viewer.itemChanged.add((sender, e) => { 
         const container = automation.container; 
         container.size = container.mapper.sizeToContainerCoordinates(viewer.imageSize); 
 
         //Create new canvas data provider for the new image 
         const canvasDataProvider = new lt.Demos.Annotations.CanvasDataProvider(viewer.activeItem.canvas); 
         imageViewerAutomationControl.automationDataProvider = canvasDataProvider; 
 
      }); 
 
      // set up this automation as the active one 
      this._automation.active = true; 
 
      const exampleButton = document.getElementById("exampleButton"); 
      exampleButton.onclick = () => { 
         if(callback) 
            callback(this._automation, this._viewer); 
      } 
   } 
} 
<!doctype html> 
<html lang="en"> 
<title>AnnObject Example | AnnPolyline</title> 
 
<head> 
   <script src="https://code.jquery.com/jquery-2.2.4.min.js" 
      integrity="sha256-BbhdlvQf/xTY9gja0Dq3HiwQF8LaCRTXxZKRutelT44=" crossorigin="anonymous"></script> 
 
   <script src="../../LT/Leadtools.js"></script> 
   <script src="../../LT/Leadtools.Controls.js"></script> 
   <script src="../../LT/Leadtools.Annotations.Engine.js"></script> 
   <script src="../../LT/Leadtools.Annotations.Designers.js"></script> 
   <script src="../../LT/Leadtools.Annotations.Rendering.Javascript.js"></script> 
   <script src="../../LT/Leadtools.Annotations.Automation.js"></script> 
   <script src="../../LT/Leadtools.Annotations.BatesStamp.js"></script> 
   <script src="../../LT/Leadtools.Demos.js"></script> 
   <script src="../../LT/Leadtools.Demos.Annotations.js"></script> 
   <style> 
      #imageViewerDiv { 
         border: 1px solid #000000; 
         width: 800px; 
         height: 800px; 
         background-color: #7F7F7F; 
      } 
   </style> 
   <!-- All demo files are bundled and appended to the window --> 
   <script src="../../bundle.js" type="text/javascript"></script> 
</head> 
 
<body> 
   <p>Either Pan/Zoom or Annotations mode. In annotations mode, draw new objects or edit them.</p> 
   <div> 
      <select id="currentObjectIdSelect"></select> 
   </div> 
   <div> 
      <input type="button" id="exampleButton" value="Example" /> 
      <label id="exampleLabel" /> 
   </div> 
   <div id="imageViewerDiv" /> 
</body> 
 
<script> 
   window.onload = () => new window.examples.AnnObjects.AnnPolyline(); 
</script> 
</html> 
Requirements

Target Platforms

Help Version 22.0.2023.1.31
Products | Support | Contact Us | Intellectual Property Notices
© 1991-2023 LEAD Technologies, Inc. All Rights Reserved.

Leadtools.Annotations.Engine Assembly
Products | Support | Contact Us | Intellectual Property Notices
© 1991-2023 LEAD Technologies, Inc. All Rights Reserved.