OnStatus Method

Summary

Called to indicate the status of the Print SCU.

Syntax

C++/CLI

public virtual void OnStatus( 
   DicomPrintScuStatus status, 
   DicomCommandStatusType operationStatus 
)

public: 
virtual void OnStatus(  
   DicomPrintScuStatus status, 
   DicomCommandStatusType operationStatus 
)

Parameters

status
Specifies the status of the Print SCU.

operationStatus
When the parameter status is one of the ReceivexxxRsp enumerated status values (such as DicomPrintScuStatus.ReceiveCreateFilmSessionRsp), operationStatus will be either DicomCommandStatusType.Success (in case a Success or Warning status code is specified in the response of the Print SCP) or the Failure status code specified in the response. For all other enumerated values of status, operationStatus is meaningless and is always set to 0.

Remarks

As an example, when the method CreateFilmSession is called to create a Film Session, and assuming that the method succeeds, the callback method OnStatus will be called twice: The first time with status set to DicomPrintScuStatus.SendCreateFilmSessionRQ and operationStatus set to 0, and the second time with status set to DicomPrintScuStatus.ReceiveCreateFilmSessionRsp and operationStatus set to DicomCommandStatusType.Success. When the parameter status is one of the ReceivexxxRsp enumerated status values, the parameter operationStatus is determined as follows:

If the status code specified in the response of the Print SCP is either a Success or Warning status code, operationStatus will be set to DicomCommandStatusType.Success. The method GetLastOperationStatus can be used to obtain the actual status code. If it is really a Success status code, the method will return DicomCommandStatusType.Success; otherwise, it will return the Warning status code.
If a Failure status code is specified in the response of the Print SCP, operationStatus will be set to that Failure status code. The same status code would be returned by the method GetLastOperationStatus.

The implementation of the DicomPrintScu class for this method simply does nothing. In order to make use of this callback method, you should create a new class derived from the DicomPrintScu class and override the method providing the desired implementation.

Example

using Leadtools; 
using Leadtools.Dicom; 
 
 
public class MyDicomPrintSCU : DicomPrintScu 
{ 
   public MyDicomPrintSCU(string path) : base(path) { } 
 
   public override void OnStatus(DicomPrintScuStatus status, DicomCommandStatusType operationStatus) 
   { 
      string statusCodeType = "Unknown"; 
      StringBuilder msg = new StringBuilder(); 
      switch (status) 
      { 
         case DicomPrintScuStatus.ReceiveAbort: 
            DicomPrintScuAbortInformation printSCUAbortInfo = GetAbortInformation(); 
            msg.AppendFormat("Source = {0}, Reason = {1}", printSCUAbortInfo.Source, printSCUAbortInfo.Reason); 
            Console.WriteLine("Print SCP Aborted the Association: " + msg.ToString()); 
            break; 
 
         case DicomPrintScuStatus.ReceivePrintFilmSessionRsp: 
            DicomCommandStatusType commandStatusType = GetLastOperationStatus(); 
            if (operationStatus == DicomCommandStatusType.Success) 
            { 
               if (commandStatusType == DicomCommandStatusType.Success) 
               { 
                  statusCodeType = "Success"; 
               } 
               else 
               { 
                  statusCodeType = "Warning"; 
               } 
            } 
            else 
            { 
               statusCodeType = "Failure"; 
            } 
            msg.AppendFormat("Status: 0x{0:X4} {1}", commandStatusType, statusCodeType); 
            Console.WriteLine($"Received N-ACTION-RSP (Basic Film Session SOP Class): {msg.ToString()}"); 
            break; 
      } 
   } 
 
      public override void OnPrinterReport(int eventTypeID, DicomPrinterReportInformation reportInfo) 
   { 
      StringBuilder msg = new StringBuilder(); 
      string eventTypeName = "Normal"; 
      switch (eventTypeID) 
      { 
         case 2: 
            eventTypeName = "Warning"; 
            break; 
 
         case 3: 
            eventTypeName = "Failure"; 
            break; 
      } 
 
      msg.AppendFormat("Event Type Name: {0}", eventTypeName); 
 
      if (eventTypeID != 1 && reportInfo != null) 
      { 
         if (reportInfo.PrinterStatusInfo != null) 
         { 
            msg.AppendFormat("{0}Printer Status Info: {1}", Environment.NewLine, reportInfo.PrinterStatusInfo); 
         } 
 
         if (reportInfo.FilmDestination != null) 
         { 
            msg.AppendFormat("{0}Film Destination: {1}", Environment.NewLine, reportInfo.FilmDestination); 
         } 
 
         if (reportInfo.PrinterName != null) 
         { 
            msg.AppendFormat("{0}Printer Name: {1}", Environment.NewLine, reportInfo.PrinterName); 
         } 
      } 
      Console.WriteLine($"Printer Status Report: {msg.ToString()}"); 
   } 
 
   public override void OnPrintJobReport(string printJobInstanceUID, int eventTypeID, DicomPrintJobReportInformation reportInfo) 
   { 
      StringBuilder msg = new StringBuilder(); 
      msg.AppendFormat("Print Job SOP Instance UID: {0}", printJobInstanceUID); 
 
      string eventTypeName = "Pending"; 
      switch (eventTypeID) 
      { 
         case 2: 
            eventTypeName = "Printing"; 
            break; 
 
         case 3: 
            eventTypeName = "Done"; 
            break; 
 
         case 4: 
            eventTypeName = "Failure"; 
            break; 
      } 
      msg.AppendFormat("{0}Event Type Name: {1}", Environment.NewLine, eventTypeName); 
 
      if (reportInfo != null) 
      { 
         if (reportInfo.ExecutionStatusInfo != null) 
         { 
            msg.AppendFormat("{0}Execution Status Info: {1}", Environment.NewLine, reportInfo.ExecutionStatusInfo); 
         } 
 
         if (reportInfo.FilmSessionLabel != null) 
         { 
            msg.AppendFormat("{0}Film Session Label: {1}", Environment.NewLine, reportInfo.FilmSessionLabel); 
         } 
 
         if (reportInfo.PrinterName != null) 
         { 
            msg.AppendFormat("{0}Printer Name: {1}", Environment.NewLine, reportInfo.PrinterName); 
         } 
      } 
      Console.WriteLine($"Print Job Status Report: {msg.ToString()}"); 
   } 
}; 
 
void PerformBasicPM() 
{ 
 
   //It's assumed that support for medical communication is already unlocked 
 
   //Make sure to initialize the DICOM engine, this needs to be done only once  
   //In the whole application 
   DicomEngine.Startup(); 
 
   //Make sure to initialize the DICOM Communication engine, this needs to be done only once  
   //In the whole application 
   DicomNet.Startup(); 
 
   //The DicomPrintSCU is disposable, this is why we are using the "using" keyword 
   using (MyDicomPrintSCU printSCU = new MyDicomPrintSCU(null)) 
   { 
      printSCU.SetTimeout(60); 
 
      try 
      { 
         // Establish the Association 
         bool ret = printSCU.Associate("10.1.1.209", 7104, "PrintSCP", "PrintSCU", 
                              DicomPrintScuPrintManagementClassFlags.BasicGrayscalePmMetaSopClass | 
                              DicomPrintScuPrintManagementClassFlags.BasicColorPmMetaSopClass | 
                              DicomPrintScuPrintManagementClassFlags.BasicAnnotationBoxSopClass | 
                              DicomPrintScuPrintManagementClassFlags.BasicPrintImageOverlayBoxSopClass | 
                              DicomPrintScuPrintManagementClassFlags.PresentationLutSopClass | 
                              DicomPrintScuPrintManagementClassFlags.PrintJobSopClass | 
                              DicomPrintScuPrintManagementClassFlags.PrinterConfigurationRetrievalSopClass); 
         //The method will return false if the association was rejected, 
         //if some other error occurred then an exception will be thrown 
         if (ret == false) 
         { 
            DicomPrintScuAssociateRejectInformation associateRejectInfo = printSCU.GetAssociateRejectInformation(); 
            if (associateRejectInfo != null) 
            { 
               StringBuilder msg = new StringBuilder(); 
               msg.AppendFormat("Source = {0}, Reason = {1}", associateRejectInfo.Source, associateRejectInfo.Reason); 
               Console.WriteLine(msg.ToString()); 
               return; 
            } 
         } 
 
         // Display some printer info 
         GetPrinterInfo(printSCU); 
 
         // Display some printer configuration info 
         GetPrinterConfigInfo(printSCU); 
 
         // Create a Film Session 
         DicomFilmSessionParameters filmSessionParameters = printSCU.GetDefaultFilmSessionParameters(); 
         filmSessionParameters.NumberOfCopies = 1; 
 
         //Over here we can set some other film session parameters before creating the film session. 
         //To set these parameters we can access one or more of these properties: 
         //DicomFilmSessionParameters.NumberOfCopies 
         //DicomFilmSessionParameters.MemoryAllocation 
         //DicomFilmSessionParameters.OwnerID 
         //DicomFilmSessionParameters.PrintPriority 
         //DicomFilmSessionParameters.MediumType 
         //DicomFilmSessionParameters.FilmDestination 
         //DicomFilmSessionParameters.FilmSessionLabel 
 
         printSCU.CreateFilmSession(filmSessionParameters, true); 
         Console.WriteLine($"Film Session SOP Instance UID: {printSCU.GetFilmSessionInstanceUid()}"); 
 
         // Update the Film Session to specify a "MED" Print Priority 
         filmSessionParameters = printSCU.GetDefaultFilmSessionParameters(); 
         filmSessionParameters.PrintPriority = "MED"; 
         printSCU.UpdateFilmSession(filmSessionParameters); 
 
 
         DicomFilmBoxParameters filmBoxParameters = printSCU.GetDefaultFilmBoxParameters(); 
 
         if (printSCU.IsClassSupported(DicomPrintScuPrintManagementClassFlags.BasicAnnotationBoxSopClass)) 
         { 
            filmBoxParameters.AnnotationDisplayFormatID = "SomeID"; 
         } 
 
         //Over here we can set some other film box parameters before creating the film box. 
         //To set these parameters we can access one or more of these properties: 
         //DicomFilmBoxParameters.ImageDisplayFormat 
         //DicomFilmBoxParameters.FilmOrientation 
         //DicomFilmBoxParameters.FilmSizeID 
         //DicomFilmBoxParameters.ConfigurationInformation 
         //DicomFilmBoxParameters.AnnotationDisplayFormatID 
         //DicomFilmBoxParameters.SmoothingType 
         //DicomFilmBoxParameters.BorderDensity 
         //DicomFilmBoxParameters.EmptyImageDensity 
         //DicomFilmBoxParameters.Trim 
         //DicomFilmBoxParameters.RequestedResolutionID 
         //DicomFilmBoxParameters.MaxDensity 
         //DicomFilmBoxParameters.MinDensity 
         //DicomFilmBoxParameters.Illumination 
         //DicomFilmBoxParameters.ReflectedAmbientLight 
         //DicomFilmBoxParameters.MagnificationType 
 
         // Create a Film Box 
         printSCU.CreateFilmBox(filmBoxParameters, null); 
         Console.WriteLine($"Film Box SOP Instance UID: {printSCU.GetFilmBoxInstanceUid()}"); 
 
         // Create a Presentation LUT 
         if (printSCU.IsClassSupported(DicomPrintScuPrintManagementClassFlags.PresentationLutSopClass)) 
         { 
            // Make sure that you have a valid presentation state dataset, 
            // otherwise leave this code commented out 
 
            /* 
            using (DicomDataSet presentationLUTDataset = new DicomDataSet()) 
            { 
               //Load DICOM File 
               presentationLUTDataset.Load(LeadtoolsExamples.Common.ImagesPath.Path + "plut_Pre.dcm", DicomDataSetLoadFlags.None); 
               printSCU.CreatePresentationLUT(presentationLUTDataset, null); 
 
               string presLUTInstanceUID = printSCU.GetPresentationLutInstanceUid(); 
               if(presLUTInstanceUID != null) 
               { 
                  Console.WriteLine($"Pres LUT SOP Instance UID: {presLUTInstanceUID}"); 
                  printSCU.UpdateFilmBox(null, presLUTInstanceUID); 
               } 
             } 
             */ 
         } 
 
         using (DicomDataSet imageDataset = new DicomDataSet()) 
         { 
            //Load DICOM File 
            imageDataset.Load(Path.Combine(LEAD_VARS.ImagesDir, "IMAGE3.dcm"), DicomDataSetLoadFlags.LoadAndClose); 
            // Update the Image Box. Since the Image Display Format of the Film Box was 
            // set to "STANDARD\1,1", then we are supposed to have one Image Box created 
            // by the Print SCP. 
            if (printSCU.GetImageBoxesCount() > 0) 
            { 
               Console.WriteLine($"Image Box SOP Instance UID: {printSCU.GetImageBoxInstanceUid(0)}"); 
 
               DicomImageBoxParameters imageBoxParameters = printSCU.GetDefaultImageBoxParameters(); 
               imageBoxParameters.ImagePosition = 1; 
 
               //Over here we can set some other image box parameters before updating the image box. 
               //To set these parameters we can access one or more of these properties: 
               //DicomImageBoxParameters.MinDensity 
               //DicomImageBoxParameters.MaxDensity 
               //DicomImageBoxParameters.RequestedImageSize 
               //DicomImageBoxParameters.Polarity 
               //DicomImageBoxParameters.MagnificationType 
               //DicomImageBoxParameters.SmoothingType 
               //DicomImageBoxParameters.ConfigurationInformation 
               //DicomImageBoxParameters.RequestedDecimateCropBehavior 
 
               printSCU.UpdateImageBox(printSCU.GetImageBoxInstanceUid(0), 
                                       imageDataset, 
                                       0, 
                                       imageBoxParameters, 
                                       null, 
                                       null); 
               // We don't need them any more 
               printSCU.FreeImageBoxesInstanceUids(); 
            } 
 
            // Create an overlay box 
            DicomOverlayBoxParameters overlayBoxParameters = printSCU.GetDefaultOverlayBoxParameters(); 
 
            //Over here we can set some other overlay box parameters before creating the image overlay box. 
            //To set these parameters we can access one or more of these properties: 
            //DicomOverlayBoxParameters.MagnifyToNumberOfColumns 
            //DicomOverlayBoxParameters.OverlayBackgroundDensity 
            //DicomOverlayBoxParameters.OverlayForegroundDensity 
            //DicomOverlayBoxParameters.OverlayMagnificationType 
            //DicomOverlayBoxParameters.OverlayOriginColumn 
            //DicomOverlayBoxParameters.OverlayOriginRow 
            //DicomOverlayBoxParameters.OverlayOrImageMagnification 
            //DicomOverlayBoxParameters.OverlaySmoothingType 
 
            printSCU.CreateOverlayBox(imageDataset, overlayBoxParameters); 
            Console.WriteLine($"Overlay Box SOP Instance UID: {printSCU.GetOverlayBoxInstanceUid()}"); 
         } 
 
         // Update the Annotation Boxes (if there are any)  
         int annotationBoxCount = printSCU.GetAnnotationBoxesCount(); 
         for (int i = 0; i < annotationBoxCount; i++) 
         { 
            printSCU.UpdateAnnotationBox(printSCU.GetAnnotationBoxInstanceUid(i), i + 1, "Some Text"); 
         } 
         printSCU.FreeAnnotationBoxesInstanceUids(); // We don't need them any more 
 
         // Print the Film Session (or the Film Box; there is no difference since we 
         // have a single Film Box in the Film Session)  
         printSCU.PrintFilmSession(); 
         // We can also call this 
         //PrintSCU.PrintFilmBox(); 
 
         // Display some info about the Print Job 
         if (printSCU.IsClassSupported(DicomPrintScuPrintManagementClassFlags.PrintJobSopClass)) 
         { 
            GetPrintJobInfo(printSCU, printSCU.GetPrintJobInstanceUid()); 
         } 
 
         // Delete the Film Box (anyway, it would be deleted when the Film Session 
         // is deleted)  
         printSCU.DeleteFilmBox(); 
 
         // Delete the Film Session 
         printSCU.DeleteFilmSession(); 
 
         // We can also call printSCU.DeletePresentationLUT and printSCU.DeleteOverlayBox 
         // to Delete the Presentation LUT and the Image Overlay Box  
 
      } 
      catch (DicomException ex) 
      { 
         Console.WriteLine(string.Format("An error occurred, code: {0}", ex.Code)); 
         return; 
      } 
      finally 
      { 
         // Release the Association and close the connection 
         printSCU.Release(); 
      } 
   } 
   DicomNet.Shutdown(); 
   DicomEngine.Shutdown(); 
} 
 
void GetPrinterInfo(DicomPrintScu printSCU) 
{ 
   // Query the Print SCP for the information 
   try 
   { 
      DicomPrinterInformation printerInfo = printSCU.GetPrinterInformation(null, true); 
      StringBuilder msg = new StringBuilder(); 
      msg.AppendFormat("Printer Status: {0}{2}Printer Status Info: {1}", printerInfo.PrinterStatus, printerInfo.PrinterStatusInfo, Environment.NewLine); 
 
      //Over here we can also investigate other printer information by accessing the following  
      //properties from the DicomPrinterInformation class: TimeOfLastCalibration, DateOfLastCalibration, 
      //SoftwareVersions, DeviceSerialNumber, ManufacturerModelName , Manufacturer, CreationDate, and CreationTime. 
 
      Console.WriteLine($"Printer Info: {msg.ToString()}"); 
   } 
   catch (DicomException ex) 
   { 
      Console.WriteLine(string.Format("Failed to get printer information, Error code: {0}", ex.Code)); 
   } 
} 
 
void GetPrinterConfigInfo(DicomPrintScu printSCU) 
{ 
   // Assume that the Association is already established 
 
   try 
   { 
      // Query the Print SCP for the printer configuration information 
      DicomDataSet printerConfiguration = printSCU.GetPrinterConfiguration(); 
 
      // We will display only the Printer Name and Memory Bit Depth 
      // in the first Item 
 
      DicomElement element = printerConfiguration.FindFirstElement(null, DicomTag.PrinterConfigurationSequence, false); 
      if (element == null) 
         return; 
 
      element = printerConfiguration.GetChildElement(element, true); 
      if (element == null) 
         return; 
 
      element = printerConfiguration.GetChildElement(element, true); 
      if (element == null) 
         return; 
 
      StringBuilder msg = new StringBuilder(); 
      msg.Append("Printer Name: "); 
 
      DicomElement printerName = printerConfiguration.FindFirstElement(element, DicomTag.PrinterName, true); 
      if (printerName != null) 
      { 
         string name = printerConfiguration.GetStringValue(printerName, 0); 
         if (name != null) 
         { 
            msg.AppendFormat("{0}{1}", name, Environment.NewLine); 
         } 
         else 
         { 
            msg.AppendFormat("N/A{0}", Environment.NewLine); 
         } 
      } 
 
      msg.Append("Memory Bit Depth: "); 
 
      DicomElement memoryBitDepth = printerConfiguration.FindFirstElement(element, DicomTag.MemoryBitDepth, true); 
      if (memoryBitDepth != null) 
      { 
         short[] value = printerConfiguration.GetShortValue(memoryBitDepth, 0, 1); 
         if (value.Length > 0) 
         { 
            msg.AppendFormat("{0}", value[0]); 
         } 
         else 
         { 
            msg.Append("N/A"); 
         } 
      } 
      Console.WriteLine($"Printer Config Info: {msg.ToString()}"); 
 
   } 
   catch (DicomException ex) 
   { 
      Console.WriteLine(string.Format("Failed to get Printer Configuration Info, Error code: {0}", ex.Code)); 
   } 
} 
 
void GetPrintJobInfo(DicomPrintScu printSCU, string printJobInstanceUID) 
{ 
   // Query the Print SCP for the Print Job information 
   try 
   { 
      DicomPrintJobInformation printJobInfo = printSCU.GetPrintJobInformation(printJobInstanceUID, null); 
      StringBuilder msg = new StringBuilder(); 
 
      msg.AppendFormat("Execution Status: {0}{2}Execution Status Info: {1}", 
         printJobInfo.ExecutionStatus, 
         printJobInfo.ExecutionStatusInfo, 
         Environment.NewLine); 
 
      Console.WriteLine($"Print Job Info: {msg.ToString()}"); 
   } 
   catch (DicomException ex) 
   { 
      Console.WriteLine(string.Format("Failed to get Print Job information, Error code: {0}", ex.Code)); 
   } 
} 
 
static class LEAD_VARS 
{ 
   public const string ImagesDir = @"C:\LEADTOOLS23\Resources\Images"; 
}

Requirements

Target Platforms

Reference

DicomPrintScu Class

DicomPrintScu Members

GetLastOperationStatus Method

Download our FREE evaluation

Help Version 23.0.2024.8.20

Leadtools.Dicom Assembly

Introduction

Getting Started

Namespaces

Leadtools.Dicom Namespace

Assemblies