References ▼
Version Changes: 21 to 22
The following members have been added:
| Name | Description |
|---|---|
Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.#ctor |
Initializes a new instance of the AnnAfterObjectChangedEventArgs class. |
Leadtools.Annotations.Automation.AnnAutomation.#ctor |
Initializes a new instance of the AnnAutomation class. |
Leadtools.Annotations.Automation.AnnAutomation.addLayer |
Adds a layer to the container. |
Leadtools.Annotations.Automation.AnnAutomation.attach |
Attaches this AnnAutomation object to an IAnnAutomationControl object. |
Leadtools.Annotations.Automation.AnnAutomation.attachContainer |
Attaches this AnnAutomation object to a container and optional undo/redo object. |
Leadtools.Annotations.Automation.AnnAutomation.bringLayerToFront |
Brings the currently selected layer up in the Z-order. |
Leadtools.Annotations.Automation.AnnAutomation.bringToFront |
Brings the currently selected object(s) up in the Z-order. |
Leadtools.Annotations.Automation.AnnAutomation.deleteLayer |
Deletes a layer from the container. |
Leadtools.Annotations.Automation.AnnAutomation.flip |
Flips the objects that are currently being edited (selected) in this AnnAutomation. |
Leadtools.Annotations.Automation.AnnAutomation.getContainerInvalidRect |
Gets the current invalidation rectangle (the physical location and size) for a container. |
Leadtools.Annotations.Automation.AnnAutomation.getObjectInvalidateRect |
Gets a LeadRectD object that specifies the current physical rectangle of this AnnObject. |
Leadtools.Annotations.Automation.AnnAutomation.hitTestContainer |
Gets the container under the specified location. |
Leadtools.Annotations.Automation.AnnAutomation.invalidate |
Invalidates the specified region of the automation control. |
Leadtools.Annotations.Automation.AnnAutomation.invalidateContainer |
Invalidates the specified container and re-renders its content in the automation control. |
Leadtools.Annotations.Automation.AnnAutomation.invalidateObject |
Invalidates and re-draws an object. |
Leadtools.Annotations.Automation.AnnAutomation.invokeAfterObjectChanged |
Invokes the AfterObjectChanged event with the specified parameters. |
Leadtools.Annotations.Automation.AnnAutomation.invokeObjectModified |
Invokes the ObjectModified event with the specified parameters. |
Leadtools.Annotations.Automation.AnnAutomation.layerFromSelectedObjects |
Creates a new layer from the currently selected objects. |
Leadtools.Annotations.Automation.AnnAutomation.onAfterUndoRedo |
Raises the AfterUndoRedo event. |
Leadtools.Annotations.Automation.AnnAutomation.onAutomationPointerDown |
Called by the IAnnAutomationControl pointer down event. |
Leadtools.Annotations.Automation.AnnAutomation.onAutomationPointerMove |
Called by the IAnnAutomationControl pointer move event. |
Leadtools.Annotations.Automation.AnnAutomation.onAutomationPointerUp |
Called by the IAnnAutomationControl pointer up event. |
Leadtools.Annotations.Automation.AnnAutomation.onCurrentDesignerChanged |
Raises the CurrentDesignerChanged event. |
Leadtools.Annotations.Automation.AnnAutomation.onDragDrop |
Raises the DragDrop event. |
Leadtools.Annotations.Automation.AnnAutomation.onUndoRedoChanged |
Raises the UndoRedoChanged event. |
Leadtools.Annotations.Automation.AnnAutomation.pasteAt |
Copies the annotation objects from the clipboard to this AnnAutomation at the specified location. |
Leadtools.Annotations.Automation.AnnAutomation.pasteStringAt |
Copies the annotation objects contained in a serialization object at the specified position. |
Leadtools.Annotations.Automation.AnnAutomation.selectLayer |
Selects a layer in this AnnAutomation. |
Leadtools.Annotations.Automation.AnnAutomation.selectObject |
Select an object in this AnnAutomation. |
Leadtools.Annotations.Automation.AnnAutomation.selectObjects |
Selects an object or a group of objects in this AnnAutomation. |
Leadtools.Annotations.Automation.AnnAutomation.sendLayerToBack |
Sends the currently selected layer down in the Z-order. |
Leadtools.Annotations.Automation.AnnAutomation.sendToBack |
Sends the currently selected object(s) down in the Z-order. |
Leadtools.Annotations.Automation.AnnAutomationEventArgs.#ctor |
Initializes a new instance of AnnAutomationEventArgs. |
Leadtools.Annotations.Automation.AnnAutomationEventArgs.create |
Creates a new instance of AnnAutomationEventArgs with the specified parameter. |
Leadtools.Annotations.Automation.AnnAutomationManager.create |
Creates a new instance of AnnAutomationManager with the specified rendering engine. |
Leadtools.Annotations.Automation.AnnAutomationManager.findObject |
Finds the AnnAutomationObject for a specified AnnObject |
Leadtools.Annotations.Automation.AnnAutomationManager.findObjectById |
Finds the specified AnnAutomationObject by its id. |
Leadtools.Annotations.Automation.AnnAutomationManager.loadPackage |
Loads the automation objects from the specified package. |
Leadtools.Annotations.Automation.AnnAutomationObjects.add |
Adds the specified AnnAutomationObject to the end of the collection. |
Leadtools.Annotations.Automation.AnnAutomationObjects.addRange |
Adds the items of the specified array to the end of this collection. |
Leadtools.Annotations.Automation.AnnAutomationObjects.clear |
Removes all elements from this AnnAutomationObjects collection. |
Leadtools.Annotations.Automation.AnnAutomationObjects.clearItems |
Removes all items from the collection. |
Leadtools.Annotations.Automation.AnnAutomationObjects.collectionChanged |
Occurs when the collection changes. |
Leadtools.Annotations.Automation.AnnAutomationObjects.contains |
Determines whether an AnnAutomationObject is in the collection. |
Leadtools.Annotations.Automation.AnnAutomationObjects.count |
Gets the number of elements contained in the collection. |
Leadtools.Annotations.Automation.AnnAutomationObjects.getEnumerator |
Returns an enumerator that iterates through the collection. |
Leadtools.Annotations.Automation.AnnAutomationObjects.indexOf |
Searches for the specified object and returns the zero-based index of the first occurrence within the entire collection. |
Leadtools.Annotations.Automation.AnnAutomationObjects.insert |
Inserts an item into this collection at the specified index. |
Leadtools.Annotations.Automation.AnnAutomationObjects.insertItem |
Inserts the specified AnnAutomationObject into this AnnAutomationObjects collection at the specified index. |
Leadtools.Annotations.Automation.AnnAutomationObjects.insertItemRange |
Inserts the items of the specified array to into this collection at the specified index. |
Leadtools.Annotations.Automation.AnnAutomationObjects.insertRange |
Inserts the items of the specified array to into this collection at the specified index. |
Leadtools.Annotations.Automation.AnnAutomationObjects.item |
Gets or sets the element at the specified index. |
Leadtools.Annotations.Automation.AnnAutomationObjects.move |
Moves the item at the specified index to a new location in the collection. |
Leadtools.Annotations.Automation.AnnAutomationObjects.moveItem |
Moves the item at the specified index to a new location in the collection. |
Leadtools.Annotations.Automation.AnnAutomationObjects.onCollectionChanged |
Raises the CollectionChanged event with the provided arguments. |
Leadtools.Annotations.Automation.AnnAutomationObjects.remove |
Removes the first occurrence of a specific object from the collection. |
Leadtools.Annotations.Automation.AnnAutomationObjects.removeAt |
Removes the element at the specified index of the AnnAutomationObjects collection. |
Leadtools.Annotations.Automation.AnnAutomationObjects.removeItem |
Removes the element at the specified index of the AnnAutomationObjects collection. |
Leadtools.Annotations.Automation.AnnAutomationObjects.setItem |
Replaces the element at the specified index. |
Leadtools.Annotations.Automation.AnnAutomationObjects.toArray |
Copies the elements of the AnnAutomationObjects collection to a new array. |
Leadtools.Annotations.Automation.AnnAutomations.add |
Adds the specified AnnAutomationObject to the end of the collection. |
Leadtools.Annotations.Automation.AnnAutomations.addRange |
Adds the items of the specified array to the end of this collection. |
Leadtools.Annotations.Automation.AnnAutomations.clear |
Removes all elements from this AnnAutomationObjects collection. |
Leadtools.Annotations.Automation.AnnAutomations.clearItems |
Removes all items from the collection. |
Leadtools.Annotations.Automation.AnnAutomations.collectionChanged |
Occurs when the collection changes. |
Leadtools.Annotations.Automation.AnnAutomations.contains |
Determines whether the specified AnnAutomation is in the collection. |
Leadtools.Annotations.Automation.AnnAutomations.count |
Gets the number of elements contained in the collection. |
Leadtools.Annotations.Automation.AnnAutomations.getEnumerator |
Returns an enumerator that iterates through the collection. |
Leadtools.Annotations.Automation.AnnAutomations.indexOf |
Searches for the specified object and returns the zero-based index of the first occurrence within the entire collection. |
Leadtools.Annotations.Automation.AnnAutomations.insert |
Inserts an item into this collection at the specified index. |
Leadtools.Annotations.Automation.AnnAutomations.insertItem |
Inserts the specified AnnAutomation into this AnnAutomations collection at the specified index. |
Leadtools.Annotations.Automation.AnnAutomations.insertItemRange |
Inserts the items of the specified array to into this collection at the specified index. |
Leadtools.Annotations.Automation.AnnAutomations.insertRange |
Inserts the items of the specified array to into this collection at the specified index. |
Leadtools.Annotations.Automation.AnnAutomations.item |
Gets or sets the element at the specified index. |
Leadtools.Annotations.Automation.AnnAutomations.move |
Moves the item at the specified index to a new location in the collection. |
Leadtools.Annotations.Automation.AnnAutomations.moveItem |
Moves the item at the specified index to a new location in the collection. |
Leadtools.Annotations.Automation.AnnAutomations.onCollectionChanged |
Raises the CollectionChanged event with the provided arguments. |
Leadtools.Annotations.Automation.AnnAutomations.remove |
Removes the first occurrence of a specific object from the collection. |
Leadtools.Annotations.Automation.AnnAutomations.removeAt |
Removes the element at the specified index of the AnnAutomations collection. |
Leadtools.Annotations.Automation.AnnAutomations.removeItem |
Removes the element at the specified index of the AnnAutomationObjects collection. |
Leadtools.Annotations.Automation.AnnAutomations.setItem |
Replaces the element at the specified index. |
Leadtools.Annotations.Automation.AnnAutomations.toArray |
Copies the elements of the AnnAutomations collection to a new array. |
Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.#ctor |
Initializes a new instance of the AnnBeforeObjectChangedEventArgs class. |
Leadtools.Annotations.Automation.AnnCursorEventArgs.#ctor |
Initializes a new instance of AnnCursorEventArgs with the specified parameters. |
Leadtools.Annotations.Automation.AnnDragDropEventArgs.create |
Creates a new instance of AnnDragDropEventArgs with the specified parameters. |
Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs.#ctor |
Creates a new instance of AnnObjectModifiedEventArgs with the specified parameters. |
The following members have been removed:
| Name |
|---|
| None |
Version Changes: 20 to 21
The following members have been added:
| Name |
|---|
| None |
The following members have been removed:
| Name |
|---|
| None |
Version Changes: 19 to 20
The following members have been added:
| Name | Description |
|---|---|
Leadtools.Annotations.Automation.AnnAutomation.activeContainerChanged |
Occurs when the active container of this object is changed. |
Leadtools.Annotations.Automation.AnnAutomation.afterObjectChanged |
Occurs when an AnnObject has changed. |
Leadtools.Annotations.Automation.AnnAutomation.afterUndoRedo |
Occurs after an undo or redo operation. |
Leadtools.Annotations.Automation.AnnAutomation.beforeObjectChanged |
Occurs when an AnnObject is about to be changed. |
Leadtools.Annotations.Automation.AnnAutomation.currentDesignerChanged |
Occurs when the current designer has been changed. |
Leadtools.Annotations.Automation.AnnAutomation.deserializeObjectError |
Occurs when an error occur during an object serialization operation. |
Leadtools.Annotations.Automation.AnnAutomation.dragDrop |
Occurs when an AnnObject is being dragged out of a container. |
Leadtools.Annotations.Automation.AnnAutomation.draw |
Occurs when an AnnObject is being drawn. |
Leadtools.Annotations.Automation.AnnAutomation.edit |
Occurs when an AnnObject is being edited. |
Leadtools.Annotations.Automation.AnnAutomation.editContent |
Occurs when the content of an AnnObject is edited. |
Leadtools.Annotations.Automation.AnnAutomation.editText |
Occurs when the text of an AnnObject is edited. |
Leadtools.Annotations.Automation.AnnAutomation.lockObject |
Occurs when an AnnObject is locked. |
Leadtools.Annotations.Automation.AnnAutomation.objectModified |
Occurs when one or more AnnObject has changed. |
Leadtools.Annotations.Automation.AnnAutomation.onShowContextMenu |
Occurs when the automation needs to show the context menu when no objects are selected. |
Leadtools.Annotations.Automation.AnnAutomation.onShowObjectProperties |
Occurs when the automation needs to show the properties dialog of the selected object. |
Leadtools.Annotations.Automation.AnnAutomation.restoreCursor |
Occurs when the automation has determine that the original cursor needs to be restored. |
Leadtools.Annotations.Automation.AnnAutomation.run |
Occurs when an AnnObject is being run. |
Leadtools.Annotations.Automation.AnnAutomation.selectedObjectsChanged |
Occurs when the selected object changes. |
Leadtools.Annotations.Automation.AnnAutomation.setCursor |
Occurs when the automation has determine that the user needs to change the cursor. |
Leadtools.Annotations.Automation.AnnAutomation.toolTip |
Occurs when the mouse hovers over an annotation object and a tooltip is requested. |
Leadtools.Annotations.Automation.AnnAutomation.undoRedoChanged |
Occurs when the undo or redo buffer changes. |
Leadtools.Annotations.Automation.AnnAutomation.unlockObject |
Occurs when an AnnObject is unlocked. |
Leadtools.Annotations.Automation.AnnAutomationManager.currentObjectIdChanged |
Occurs when the value of the CurrentObjectId property changes. |
Leadtools.Annotations.Automation.AnnAutomationManager.currentRubberStampTypeChanged |
Occurs when the value of the CurrentRubberStampType property changes. |
Leadtools.Annotations.Automation.AnnAutomationManager.UseFreehandSelection |
Indicates whether to use free hand selection. |
Leadtools.Annotations.Automation.AnnAutomationManager.userModeChanged |
Occurs when the value of the UserMode property changes |
Leadtools.Annotations.Automation.AnnAutomationObjects.collectionChanged |
Occurs when the collection changes. |
Leadtools.Annotations.Automation.AnnAutomations.collectionChanged |
Occurs when the collection changes. |
The following members have been removed:
| Name | Description |
|---|---|
Leadtools.Annotations.Automation.AnnAutomation.activeContainerChanged.remove |
Occurs when the active container of this object is changed. |
Leadtools.Annotations.Automation.AnnAutomation.afterObjectChanged.remove |
Occurs when an AnnObject has changed. |
Leadtools.Annotations.Automation.AnnAutomation.afterUndoRedo.remove |
Occurs after an undo or redo operation. |
Leadtools.Annotations.Automation.AnnAutomation.beforeObjectChanged.remove |
Occurs when an AnnObject is about to be changed. |
Leadtools.Annotations.Automation.AnnAutomation.currentDesignerChanged.remove |
Occurs when the current designer has been changed. |
Leadtools.Annotations.Automation.AnnAutomation.deserializeObjectError.remove |
Occurs when an error occur during an object serialization operation. |
Leadtools.Annotations.Automation.AnnAutomation.dragDrop.remove |
Occurs when an AnnObject is being dragged out of a container. |
Leadtools.Annotations.Automation.AnnAutomation.draw.remove |
Occurs when an AnnObject is being drawn. |
Leadtools.Annotations.Automation.AnnAutomation.edit.remove |
Occurs when an AnnObject is being edited. |
Leadtools.Annotations.Automation.AnnAutomation.editContent.remove |
Occurs when the content of an AnnObject is edited. |
Leadtools.Annotations.Automation.AnnAutomation.editText.remove |
Occurs when the text of an AnnObject is edited. |
Leadtools.Annotations.Automation.AnnAutomation.lockObject.remove |
Occurs when an AnnObject is locked. |
Leadtools.Annotations.Automation.AnnAutomation.objectModified.remove |
Occurs when one or more AnnObject has changed. |
Leadtools.Annotations.Automation.AnnAutomation.onShowContextMenu.remove |
Occurs when the automation needs to show the context menu when no objects are selected. |
Leadtools.Annotations.Automation.AnnAutomation.onShowObjectProperties.remove |
Occurs when the automation needs to show the properties dialog of the selected object. |
Leadtools.Annotations.Automation.AnnAutomation.restoreCursor.remove |
Occurs when the automation has determine that the original cursor needs to be restored. |
Leadtools.Annotations.Automation.AnnAutomation.run.remove |
Occurs when an AnnObject is being run. |
Leadtools.Annotations.Automation.AnnAutomation.selectedObjectsChanged.remove |
Occurs when the selected object changes. |
Leadtools.Annotations.Automation.AnnAutomation.setCursor.remove |
Occurs when the automation has determine that the user needs to change the cursor. |
Leadtools.Annotations.Automation.AnnAutomation.toolTip.remove |
Occurs when the mouse hovers over an annotation object and a tooltip is requested. |
Leadtools.Annotations.Automation.AnnAutomation.undoRedoChanged.remove |
Occurs when the undo or redo buffer changes. |
Leadtools.Annotations.Automation.AnnAutomation.unlockObject.remove |
Occurs when an AnnObject is unlocked. |
Leadtools.Annotations.Automation.AnnAutomationManager.currentObjectIdChanged.remove |
Occurs when the value of the CurrentObjectId property changes. |
Leadtools.Annotations.Automation.AnnAutomationManager.currentRubberStampTypeChanged.remove |
Occurs when the value of the CurrentRubberStampType property changes. |
Leadtools.Annotations.Automation.AnnAutomationManager.userModeChanged.remove |
Occurs when the value of the UserMode property changes |
Leadtools.Annotations.Automation.AnnAutomationObjects.collectionChanged.remove |
Occurs when the collection changes. |
Leadtools.Annotations.Automation.AnnAutomations.collectionChanged.remove |
Occurs when the collection changes. |
Version Changes: 18 to 19
The following members have been added:
| Name | Description |
|---|---|
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.#ctor | Initializes a new instance of the AnnAfterObjectChangedEventArgs class. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.cancel | Gets or sets a value indicating whether the change should be canceled. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.changeType | Gets the type of change. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.designer | Gets the designer responsible for the change. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.objects | Gets the objects that have been changed. |
| Leadtools.Annotations.Automation.AnnAutomation.#ctor | Initializes a new instance of the AnnAutomation class. |
| Leadtools.Annotations.Automation.AnnAutomation.active | Gets or sets a value indicating whether this AnnAutomation is active. |
| Leadtools.Annotations.Automation.AnnAutomation.activeContainer | Gets or sets the active container of the automation. |
| Leadtools.Annotations.Automation.AnnAutomation.activeContainerChanged.remove | Occurs when the active container of this object is changed. |
| Leadtools.Annotations.Automation.AnnAutomation.addLayer | Adds a layer to the container. |
| Leadtools.Annotations.Automation.AnnAutomation.afterObjectChanged.remove | Occurs when an AnnObject has changed. |
| Leadtools.Annotations.Automation.AnnAutomation.afterUndoRedo.remove | Occurs after an undo or redo operation. |
| Leadtools.Annotations.Automation.AnnAutomation.alignBottoms | Aligns the selected objects along with alignment target bottom side. |
| Leadtools.Annotations.Automation.AnnAutomation.alignCenters | Aligns the selected objects along with alignment target horizontal center. |
| Leadtools.Annotations.Automation.AnnAutomation.alignLefts | Aligns the selected objects along with alignment target left side. |
| Leadtools.Annotations.Automation.AnnAutomation.alignMiddles | Aligns the selected objects along with alignment target vertical center. |
| Leadtools.Annotations.Automation.AnnAutomation.alignRights | Aligns the selected objects along with alignment target rights side. |
| Leadtools.Annotations.Automation.AnnAutomation.alignTops | Aligns the selected objects along with alignment target top side. |
| Leadtools.Annotations.Automation.AnnAutomation.applyAllDecryptors | Applies all the decryptor AnnEncryptObject objects in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.applyAllEncryptors | Applies all the encryptor AnnEncryptObject objects in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.applyDecryptor | Applies the decryptor AnnEncryptObject that is currently being edited (selected). |
| Leadtools.Annotations.Automation.AnnAutomation.applyEncryptor | Applies the encryptor AnnEncryptObject object currently being edited (selected). |
| Leadtools.Annotations.Automation.AnnAutomation.attach | Attaches this AnnAutomation object to an IAnnAutomationControl object. |
| Leadtools.Annotations.Automation.AnnAutomation.attachContainer | Attaches this AnnAutomation object to a container and optional undo/redo object. |
| Leadtools.Annotations.Automation.AnnAutomation.automationControl | Gets the automation control for this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.beforeObjectChanged.remove | Occurs when an AnnObject is about to be changed. |
| Leadtools.Annotations.Automation.AnnAutomation.beginUndo | Creates a new undo node in this AnnAutomation object. |
| Leadtools.Annotations.Automation.AnnAutomation.beginUpdateContainers | Stops the automation from passing events to the automation control while containers are being added or removed. |
| Leadtools.Annotations.Automation.AnnAutomation.bringLayerToFront | Brings the currently selected layer up in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.bringToFront | Brings the currently selected object(s) up in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.canAlign | Gets a value that indicates whether this AnnAutomation can align or change the size for selected objects based on alignment target. |
| Leadtools.Annotations.Automation.AnnAutomation.canApplyAllDecryptors | Gets a value that indicates whether any decryptor AnnEncryptObject object in this AnnAutomation can be applied. |
| Leadtools.Annotations.Automation.AnnAutomation.canApplyAllEncryptors | Gets a value that indicates whether any encryptor AnnEncryptObject object in this AnnAutomation can be applied. |
| Leadtools.Annotations.Automation.AnnAutomation.canApplyDecryptor | Gets a value that indicates whether the object currently being edited is a decryptor AnnEncryptObject and can be applied. |
| Leadtools.Annotations.Automation.AnnAutomation.canApplyEncryptor | Gets a value that indicates whether the object currently being edited (selected) is an encryptor AnnEncryptObject and can be applied. |
| Leadtools.Annotations.Automation.AnnAutomation.canBringLayerToFirst | Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be brought up to the top of the z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.canBringLayerToFront | Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be brought up the z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.canBringToFirst | Gets a value that indicates whether this AnnAutomation can bring the currently selected object(s) to the top of the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.canBringToFront | Gets a value that indicates whether this AnnAutomation can bring the currently selected object(s) up in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.cancel | Cancels the operation currently being performed in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.cancelUndo | Cancels the undo node started in this AnnAutomation object. |
| Leadtools.Annotations.Automation.AnnAutomation.canCopy | Gets a value that indicates whether this AnnAutomation is currently in a state where objects can be copied to the clipboard. |
| Leadtools.Annotations.Automation.AnnAutomation.canDeleteObjects | Gets a value that indicates whether this AnnAutomation is currently in a state where objects can be deleted. |
| Leadtools.Annotations.Automation.AnnAutomation.canFlip | Gets a value that indicates whether this AnnAutomation is currently in a state where objects can be flipped. |
| Leadtools.Annotations.Automation.AnnAutomation.canGroup | Gets a value indicating whether this AnnAutomation is in a state where objects can be grouped together. |
| Leadtools.Annotations.Automation.AnnAutomation.canLock | Gets a value that indicates whether the object currently being edited (selected) can be locked. |
| Leadtools.Annotations.Automation.AnnAutomation.canPaste | Gets a value that indicates whether the clipboard contains annotation objects that can be pasted. |
| Leadtools.Annotations.Automation.AnnAutomation.canRealizeAllRedactions | Gets a value that indicates whether any of the AnnRedactionObject objects in this AnnAutomation can be realized. |
| Leadtools.Annotations.Automation.AnnAutomation.canRealizeRedaction | Gets a value that indicates whether the object currently being edited (selected) is an AnnRedactionObject object and can be realized. |
| Leadtools.Annotations.Automation.AnnAutomation.canRedo | Gets a value indicating whether the user can redo the previous operation performed in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.canResetRotatePoints | Gets a value that indicates whether this AnnAutomation is currently in a state where the selected AnnObject is able to have its rotate controlpoints reset to the default location. |
| Leadtools.Annotations.Automation.AnnAutomation.canRestoreAllRedactions | Gets a value that indicates whether any AnnRedactionObject objects in this AnnAutomation can be restored. |
| Leadtools.Annotations.Automation.AnnAutomation.canRestoreRedaction | Gets a value that indicates whether the object currently being edited (selected) is an AnnRedactionObject and can be restored. |
| Leadtools.Annotations.Automation.AnnAutomation.canSelectNone | Gets a value indicating whether this AnnAutomation is in a state where it can deselect objects. |
| Leadtools.Annotations.Automation.AnnAutomation.canSelectObjects | Gets a value that indicates whether the this AnnAutomation is in a state where any object can be selected. |
| Leadtools.Annotations.Automation.AnnAutomation.canSendLayerToBack | Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be sent down the z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.canSendLayerToLast | Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be sent to end of the z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.canSendToBack | Gets a value that indicates whether this AnnAutomation can send the currently selected object(s) down in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.canSendToLast | Gets a value that indicates whether this AnnAutomation can send the currently selected object(s) to the bottom of the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.canShowObjectContextMenu | Gets a value that indicates whether this AnnAutomation is currently in a state where the object context menu can be displayed. |
| Leadtools.Annotations.Automation.AnnAutomation.canShowObjectProperties | Gets a value that indicates whether this AnnAutomation is currently in a state where the object properties can be displayed. |
| Leadtools.Annotations.Automation.AnnAutomation.canShowProperties | Gets a value that indicates whether this AnnAutomation is currently in a state where the user properties dialog can be displayed. |
| Leadtools.Annotations.Automation.AnnAutomation.canUndo | Gets a value that indicates whether the user can undo the previous operation performed in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.canUngroup | Gets a value indicating whether this AnnAutomation is in a state where objects can be ungrouped. |
| Leadtools.Annotations.Automation.AnnAutomation.canUnlock | Gets a value that indicates whether the object currently being edited (selected) can be unlocked. |
| Leadtools.Annotations.Automation.AnnAutomation.container | Gets the AnnContainer of this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.containers | The list of containers in this AnnAutomation when multi-containers mode is used. |
| Leadtools.Annotations.Automation.AnnAutomation.copy | Copies the objects currently being edited to the clipboard. |
| Leadtools.Annotations.Automation.AnnAutomation.currentDesigner | Gets the current working designer. |
| Leadtools.Annotations.Automation.AnnAutomation.currentDesignerChanged.remove | Occurs when the current designer has been changed. |
| Leadtools.Annotations.Automation.AnnAutomation.currentEditObject | Gets the current AnnObject being edited. |
| Leadtools.Annotations.Automation.AnnAutomation.defaultCurrentObjectId | Gets or sets the annotations object id to use when a draw designer finishes its operation. |
| Leadtools.Annotations.Automation.AnnAutomation.deleteLayer | Deletes a layer from the container |
| Leadtools.Annotations.Automation.AnnAutomation.deleteSelectedObjects | Deletes the selected objects from this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.deserializeObjectError.remove | Occurs when an error occur during an object serialization operation. |
| Leadtools.Annotations.Automation.AnnAutomation.detach | Detaches this AnnAutomation object from its IAnnAutomationControl object. |
| Leadtools.Annotations.Automation.AnnAutomation.dragDrop.remove | Occurs when an AnnObject is being dragged out of a container. |
| Leadtools.Annotations.Automation.AnnAutomation.draw.remove | Occurs when an AnnObject is being drawn. |
| Leadtools.Annotations.Automation.AnnAutomation.edit.remove | Occurs when an AnnObject is being edited. |
| Leadtools.Annotations.Automation.AnnAutomation.editContent.remove | Occurs when the content of an AnnObject is edited. |
| Leadtools.Annotations.Automation.AnnAutomation.editText.remove | Occurs when the text of an AnnObject is edited. |
| Leadtools.Annotations.Automation.AnnAutomation.enableDragDrop | Gets or sets a value that indicates whether drag and drop is enabled in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.endDesigner | Ends (and commits) the operation currently being performed in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.endUndo | Commits the undo node started in this AnnAutomation object. |
| Leadtools.Annotations.Automation.AnnAutomation.endUpdateContainers | Instruct the viewer that updates are completed and rendering of the content can be resumed. |
| Leadtools.Annotations.Automation.AnnAutomation.flip | Flips the objects that are currently being edited (selected) in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.getContainerInvalidRect | Gets the current invalidation rectangle (the physical location and size) for a container |
| Leadtools.Annotations.Automation.AnnAutomation.getDefaultCurrentObjectId | Returns the value of the default current object id. |
| Leadtools.Annotations.Automation.AnnAutomation.getObjectInvalidateRect | Gets a LeadRectD object that specifies the current physical rectangle of this AnnObject. |
| Leadtools.Annotations.Automation.AnnAutomation.getUndoRedoObject | Gets an object that contains the current undo/redo object data. |
| Leadtools.Annotations.Automation.AnnAutomation.hitTestContainer | Gets the container under the specified location. |
| Leadtools.Annotations.Automation.AnnAutomation.invalidate | Invalidates the specified region of the automation control. |
| Leadtools.Annotations.Automation.AnnAutomation.invalidateContainer | Invalidates the specified container and re-renders its content in the automation control. |
| Leadtools.Annotations.Automation.AnnAutomation.invalidateObject | Invalidates and re-draws an object. |
| Leadtools.Annotations.Automation.AnnAutomation.invokeAfterObjectChanged | Invokes the AfterObjectChanged event with the specified parameters. |
| Leadtools.Annotations.Automation.AnnAutomation.invokeObjectModified | Invokes the ObjectModified event with the specified parameters. |
| Leadtools.Annotations.Automation.AnnAutomation.layerFromSelectedObjects | Creates a new layer from the currently selected objects. |
| Leadtools.Annotations.Automation.AnnAutomation.lock | Locks the object(s) currently being edited (selected). |
| Leadtools.Annotations.Automation.AnnAutomation.lockObject.remove | Occurs when an AnnObject is locked. |
| Leadtools.Annotations.Automation.AnnAutomation.makeSameHeight | Make the height for selected objects the same with alignment target height. |
| Leadtools.Annotations.Automation.AnnAutomation.makeSameSize | Make the size for selected objects the same with alignment target size. |
| Leadtools.Annotations.Automation.AnnAutomation.makeSameWidth | Make the width for selected objects the same with alignment target width. |
| Leadtools.Annotations.Automation.AnnAutomation.manager | Returns the AnnAutomationManager that this AnnAutomation object belongs to. |
| Leadtools.Annotations.Automation.AnnAutomation.objectModified.remove | Occurs when one or more AnnObject has changed. |
| Leadtools.Annotations.Automation.AnnAutomation.onAfterUndoRedo | Raises the AfterUndoRedo event. |
| Leadtools.Annotations.Automation.AnnAutomation.onAutomationPointerDown | Called by the IAnnAutomationControl pointer down event. |
| Leadtools.Annotations.Automation.AnnAutomation.onAutomationPointerMove | Called by the IAnnAutomationControl pointer move event. |
| Leadtools.Annotations.Automation.AnnAutomation.onAutomationPointerUp | Called by the IAnnAutomationControl pointer up event. |
| Leadtools.Annotations.Automation.AnnAutomation.onCurrentDesignerChanged | Raises the CurrentDesignerChanged event. |
| Leadtools.Annotations.Automation.AnnAutomation.onDragDrop | Raises the DragDrop event. |
| Leadtools.Annotations.Automation.AnnAutomation.onShowContextMenu.remove | Occurs when the automation needs to show the context menu when no objects are selected. |
| Leadtools.Annotations.Automation.AnnAutomation.onShowObjectProperties.remove | Occurs when the automation needs to show the properties dialog of the selected object. |
| Leadtools.Annotations.Automation.AnnAutomation.onUndoRedoChanged | Raises the UndoRedoChanged event. |
| Leadtools.Annotations.Automation.AnnAutomation.paste | Copies the annotation objects from the clipboard to this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.pasteAt | Copies the annotation objects from the clipboard to this AnnAutomation at the specified location. |
| Leadtools.Annotations.Automation.AnnAutomation.pasteStringAt | Copies the annotation objects contained in a serialization object at the specified position. |
| Leadtools.Annotations.Automation.AnnAutomation.realizeAllRedactions | Realizes all the AnnRedactionObject objects in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.realizeRedaction | Realizes the AnnRedactionObject object currently being edited (selected). |
| Leadtools.Annotations.Automation.AnnAutomation.redo | Reapplies the last operation that was undone in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.resetRotatePoints | Resets the rotate control points of the selected AnnObject to their default locations. |
| Leadtools.Annotations.Automation.AnnAutomation.restoreAllRedactions | Restores all of the AnnRedactionObject objects in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.restoreCursor.remove | Occurs when the automation has determine that the original cursor needs to be restored. |
| Leadtools.Annotations.Automation.AnnAutomation.restoreRedaction | Restores the AnnRedactionObject object currently being edited (selected). |
| Leadtools.Annotations.Automation.AnnAutomation.run.remove | Occurs when an AnnObject is being run. |
| Leadtools.Annotations.Automation.AnnAutomation.selectedObjectsChanged.remove | Occurs when the selected object changes. |
| Leadtools.Annotations.Automation.AnnAutomation.selectLayer | Selects a layer in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.selectObject | Select an object in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.selectObjects | Selects an object or a group of objects in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.sendLayerToBack | Sends the currently selected layer down in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.sendToBack | Sends the currently selected object(s) down in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.setCursor.remove | Occurs when the automation has determine that the user needs to change the cursor. |
| Leadtools.Annotations.Automation.AnnAutomation.showContextMenu | Displays the automation context menu. |
| Leadtools.Annotations.Automation.AnnAutomation.showObjectContextMenu | Displays the object context menu. |
| Leadtools.Annotations.Automation.AnnAutomation.showObjectProperties | Shows the object properties |
| Leadtools.Annotations.Automation.AnnAutomation.toolTip.remove | Occurs when the mouse hovers over an annotation object and a tooltip is requested. |
| Leadtools.Annotations.Automation.AnnAutomation.undo | Reverses the last operation performed in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.undoCapacity | Gets or sets a value that specifies the capacity of the undo/redo buffer. |
| Leadtools.Annotations.Automation.AnnAutomation.undoRedoChanged.remove | Occurs when the undo or redo buffer changes. |
| Leadtools.Annotations.Automation.AnnAutomation.unlock | Unlocks the object(s) currently being edited (selected). |
| Leadtools.Annotations.Automation.AnnAutomation.unlockObject.remove | Occurs when an AnnObject is unlocked. |
| Leadtools.Annotations.Automation.AnnAutomationEventArgs.#ctor | Initializes a new instance of AnnAutomationEventArgs. |
| Leadtools.Annotations.Automation.AnnAutomationEventArgs.cancel | Get or sets a value that indicates whether this event is to be cancelled. |
| Leadtools.Annotations.Automation.AnnAutomationEventArgs.create | Creates a new instance of AnnAutomationEventArgs with the specified parameter. |
| Leadtools.Annotations.Automation.AnnAutomationEventArgs.object | Gets the current selected automation object. |
| Leadtools.Annotations.Automation.AnnAutomationManager.automations | Gets the collection of AnnAutomation objects in this AnnAutomationManager. |
| Leadtools.Annotations.Automation.AnnAutomationManager.cancelInactiveDesigners | Gets or sets a value indicating whether any designers in an AnnAutomation are automatically canceled when the automation becomes inactive. |
| Leadtools.Annotations.Automation.AnnAutomationManager.create | Creates a new instance of AnnAutomationManager with the specified rendering engine. |
| Leadtools.Annotations.Automation.AnnAutomationManager.createDefaultObjects | Creates the default automation annotation objects. |
| Leadtools.Annotations.Automation.AnnAutomationManager.currentObjectId | Gets or sets the current automation object ID. |
| Leadtools.Annotations.Automation.AnnAutomationManager.currentObjectIdChanged.remove | Occurs when the value of the CurrentObjectId property changes. |
| Leadtools.Annotations.Automation.AnnAutomationManager.currentRubberStampType | Gets or sets the current automation rubber stamp object type. |
| Leadtools.Annotations.Automation.AnnAutomationManager.currentRubberStampTypeChanged.remove | Occurs when the value of the CurrentRubberStampType property changes. |
| Leadtools.Annotations.Automation.AnnAutomationManager.deselectOnDown | Gets or sets a value that indicates whether to de-select any objects as soon as the user clicks down with the cursor or taps using touch onthe container outside their boundaries. |
| Leadtools.Annotations.Automation.AnnAutomationManager.editContentAfterDraw | Gets or sets a value that indicates whether the EditContent event should occur automatically after the designer has successfullyfinished drawing a new object. |
| Leadtools.Annotations.Automation.AnnAutomationManager.editObjectAfterDraw | Gets or sets a value that indicates whether newly drawn objects are selected (edited). |
| Leadtools.Annotations.Automation.AnnAutomationManager.editTextAfterDraw | Gets or sets a value that indicates whether the EditText event should occur automatically after the designer has successfullyfinished drawing a new text object. |
| Leadtools.Annotations.Automation.AnnAutomationManager.enableDeselectObject | Gets or sets a value that indicates whether clicking on an already selected object while the MultiSelectModifierKey is pressedshould de-select it. |
| Leadtools.Annotations.Automation.AnnAutomationManager.enableObjectsAlignment | Gets or sets a value that indicates whether you can align selected objects based on one of them. |
| Leadtools.Annotations.Automation.AnnAutomationManager.enablePartialDrop | Gets or sets a value that indicates whether to allow partial drop of annotation objects between multiple containers. |
| Leadtools.Annotations.Automation.AnnAutomationManager.enableThumbsSelection | Gets or sets a value that indicates whether clicking on any of the thumbs of the objects automatically starts editing. |
| Leadtools.Annotations.Automation.AnnAutomationManager.enableToolTip | Gets or sets a value that indicates whether firing the ToolTip event is enabled |
| Leadtools.Annotations.Automation.AnnAutomationManager.endDrawWhenLostFocus | Gets or sets a value indicating whether any designers in an AnnAutomation are automatically canceled when the automation loses focus. |
| Leadtools.Annotations.Automation.AnnAutomationManager.endEditDesignerBeforeDraw | Gets or sets a value that indicates whether to end the current edit designer when the user starts drawing a new object. |
| Leadtools.Annotations.Automation.AnnAutomationManager.extendedModeModifierKey | Gets or sets the extended mode modifier key. |
| Leadtools.Annotations.Automation.AnnAutomationManager.findObject | Finds the AnnAutomationObject for a specified AnnObject |
| Leadtools.Annotations.Automation.AnnAutomationManager.findObjectById | Finds the specified AnnAutomationObject by id. |
| Leadtools.Annotations.Automation.AnnAutomationManager.FontRelativeToImageDpi | Indicates whether to take image DPI in consideration when calculating font size. |
| Leadtools.Annotations.Automation.AnnAutomationManager.forceSelectionModifierKey | Gets or sets a value that indicates whether the user can draw the selection object only when its key modifiers are pressed. |
| Leadtools.Annotations.Automation.AnnAutomationManager.groupsRoles | Gets or sets the AnnGroupsRoles associated with this automation manager. |
| Leadtools.Annotations.Automation.AnnAutomationManager.hitTestBehavior | Gets or sets a value that determine how objects are hit-tested through a selection rectangle. |
| Leadtools.Annotations.Automation.AnnAutomationManager.loadPackage | Loads the automation objects from the specified package. |
| Leadtools.Annotations.Automation.AnnAutomationManager.maintainAspectRatio | Gets or sets a value that indicates whether to preserve the aspect ratio when moving a corner thumb for all AnnEditDesigner derived classes. |
| Leadtools.Annotations.Automation.AnnAutomationManager.multiSelectModifierKey | Gets or sets the multi-select modifier key. |
| Leadtools.Annotations.Automation.AnnAutomationManager.objects | Gets the collection of AnnAutomationObject objects in this AnnAutomationManager. |
| Leadtools.Annotations.Automation.AnnAutomationManager.platformCallbacks | Gets the platform-specific callbacks for this automation manager. |
| Leadtools.Annotations.Automation.AnnAutomationManager.redactionRealizePassword | Gets or sets the password to use for realization of AnnRedactionObject objects. |
| Leadtools.Annotations.Automation.AnnAutomationManager.renderingEngine | Gets or sets the rendering engine associated with this AnnAutomationManager. |
| Leadtools.Annotations.Automation.AnnAutomationManager.resources | Gets or sets the annotations resources used by all the containers used with this automation manager. |
| Leadtools.Annotations.Automation.AnnAutomationManager.restrictDesigners | Gets or sets a value that indicates whether the object should be restricted inside the container boundary. |
| Leadtools.Annotations.Automation.AnnAutomationManager.rotateModifierKey | Gets or sets the rotate modifier key. |
| Leadtools.Annotations.Automation.AnnAutomationManager.runHitTestBuffer | Gets or sets the hit test buffer for all AnnRunDesigner derived classes. |
| Leadtools.Annotations.Automation.AnnAutomationManager.selectionModifierKey | Gets or sets the value of the modifier key that must be pressed in order for the user to start drawing the selection object. |
| Leadtools.Annotations.Automation.AnnAutomationManager.showThumbs | Gets or sets a value that indicates whether to show the thumbs. |
| Leadtools.Annotations.Automation.AnnAutomationManager.snapToGridOptions | Gets or sets the default AnnSnapToGridOptions of this AnnAutomationManager. |
| Leadtools.Annotations.Automation.AnnAutomationManager.thumbsGap | Gets or sets a value that indicates which thumbs to display in a polyline object. |
| Leadtools.Annotations.Automation.AnnAutomationManager.thumbsHitTestBuffer | Gets or sets the hit test buffer for all AnnEditDesigner derived classes. |
| Leadtools.Annotations.Automation.AnnAutomationManager.usePDFMode | Gets or sets if we are annotating a pdf document or no. |
| Leadtools.Annotations.Automation.AnnAutomationManager.userMode | Gets or sets the current user mode. |
| Leadtools.Annotations.Automation.AnnAutomationManager.userModeChanged.remove | Occurs when the value of the UserMode property changes |
| Leadtools.Annotations.Automation.AnnAutomationManager.useRotateThumbs | Gets or sets a value that indicates whether to show the rotation thumbs when an object is selected. |
| Leadtools.Annotations.Automation.AnnAutomationObject.contextMenu | Gets or sets the context menu associated with this AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.drawCursor | Gets or sets the mouse cursor used when drawing new objects of this AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.drawDesignerType | Gets or sets the type of the draw designer of this AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.editDesignerType | Gets or sets the type of the edit designer of this AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.groupName | Gets or sets the group name for this automation object |
| Leadtools.Annotations.Automation.AnnAutomationObject.id | Gets or sets the id of this AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.labelTemplate | Gets or sets the template used when creating labels for this AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.name | Gets or sets the name of this AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.nextNumber | Gets or sets the next number used when creating labels for this AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.objectTemplate | Gets or sets the initial annotation object template of this AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.renderer | Gets the annotation object renderer for this AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.runDesignerType | Gets or sets the type of the run designer of this AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.toolBarImage | Gets or sets the toolbar image associated with this AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.toolBarToolTipText | Gets or sets the tooltip text associated with this AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.userData | Gets or sets the user-defined data for this AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.useRotateThumbs | Enables or disables the use of rotate thumbs of this AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.#ctor | Creates an empty AnnAutomationObjects collection. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.add | Adds the specified AnnAutomationObject to the end of the collection. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.AddRange | Adds the items of the specified array to the end of this collection. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.clear | Removes all elements from this AnnAutomationObjects collection. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.clearItems | Removes all items from the collection. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.collectionChanged.remove | Occurs when the collection changes. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.contains | Determines whether an AnnAutomationObject is in the collection. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.count | Gets the number of elements contained in the collection. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.getEnumerator | Returns an enumerator that iterates through the collection. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.IndexOf | Searches for the specified object and returns the zero-based index of the first occurrence within the entire collection. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.Insert | Inserts an item into this collection at the specified index. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.insertItem | Inserts the specified AnnAutomationObject into this AnnAutomationObjects collection at the specified index. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.InsertItemRange | Inserts the items of the specified array to into this collection at the specified index. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.InsertRange | Inserts the items of the specified array to into this collection at the specified index. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.item | Gets or sets the element at the specified index. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.move | Moves the item at the specified index to a new location in the collection. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.moveItem | Moves the item at the specified index to a new location in the collection. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.onCollectionChanged | Raises the CollectionChanged event with the provided arguments. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.Remove | Removes the first occurrence of a specific object from the collection. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.removeAt | Removes the element at the specified index of the AnnAutomationObjects collection. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.removeItem | Removes the element at the specified index of the AnnAutomationObjects collection. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.setItem | Replaces the element at the specified index. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.toArray | Copies the elements of the AnnAutomationObjects collection to a new array. |
| Leadtools.Annotations.Automation.AnnAutomations.#ctor | Creates an empty AnnAutomations collection. |
| Leadtools.Annotations.Automation.AnnAutomations.add | Adds the specified AnnAutomationObject to the end of the collection. |
| Leadtools.Annotations.Automation.AnnAutomations.AddRange | Adds the items of the specified array to the end of this collection. |
| Leadtools.Annotations.Automation.AnnAutomations.clear | Removes all elements from this AnnAutomationObjects collection. |
| Leadtools.Annotations.Automation.AnnAutomations.clearItems | Removes all items from the collection. |
| Leadtools.Annotations.Automation.AnnAutomations.collectionChanged.remove | Occurs when the collection changes. |
| Leadtools.Annotations.Automation.AnnAutomations.contains | Determines whether the specified AnnAutomation is in the collection. |
| Leadtools.Annotations.Automation.AnnAutomations.count | Gets the number of elements contained in the collection. |
| Leadtools.Annotations.Automation.AnnAutomations.getEnumerator | Returns an enumerator that iterates through the collection. |
| Leadtools.Annotations.Automation.AnnAutomations.IndexOf | Searches for the specified object and returns the zero-based index of the first occurrence within the entire collection. |
| Leadtools.Annotations.Automation.AnnAutomations.Insert | Inserts an item into this collection at the specified index. |
| Leadtools.Annotations.Automation.AnnAutomations.insertItem | Inserts the specified AnnAutomation into this AnnAutomations collection at the specified index. |
| Leadtools.Annotations.Automation.AnnAutomations.InsertItemRange | Inserts the items of the specified array to into this collection at the specified index. |
| Leadtools.Annotations.Automation.AnnAutomations.InsertRange | Inserts the items of the specified array to into this collection at the specified index. |
| Leadtools.Annotations.Automation.AnnAutomations.item | Gets or sets the element at the specified index. |
| Leadtools.Annotations.Automation.AnnAutomations.move | Moves the item at the specified index to a new location in the collection. |
| Leadtools.Annotations.Automation.AnnAutomations.moveItem | Moves the item at the specified index to a new location in the collection. |
| Leadtools.Annotations.Automation.AnnAutomations.onCollectionChanged | Raises the CollectionChanged event with the provided arguments. |
| Leadtools.Annotations.Automation.AnnAutomations.Remove | Removes the first occurrence of a specific object from the collection. |
| Leadtools.Annotations.Automation.AnnAutomations.removeAt | Removes the element at the specified index of the AnnAutomations collection. |
| Leadtools.Annotations.Automation.AnnAutomations.removeItem | Removes the element at the specified index of the AnnAutomationObjects collection. |
| Leadtools.Annotations.Automation.AnnAutomations.setItem | Replaces the element at the specified index. |
| Leadtools.Annotations.Automation.AnnAutomations.toArray | Copies the elements of the AnnAutomations collection to a new array. |
| Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.#ctor | Initializes a new instance of the AnnBeforeObjectChangedEventArgs class. |
| Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.cancel | Gets or sets a value indicating whether the change should be canceled. |
| Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.changeType | Gets the type of change. |
| Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.designer | Gets the designer responsible for the change. |
| Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.objects | Gets the objects that have been changed. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.#ctor | Initializes a new instance of AnnCursorEventArgs with the specified parameters. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.designerType | Gets the designer type. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.dragDropEvent | Gets the drag/drop event data that triggered this event. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.id | Gets the id of the current AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.isRotateCenter | Gets a value that indicates whether the cursor is on the rotate center. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.isRotateGripper | Gets a value that indicates whether the cursor is on the rotate gripper. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.pointerEvent | Gets the original pointer event data that triggered this event. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.thumbIndex | Gets the 0-based thumb index. |
| Leadtools.Annotations.Automation.AnnDragDropEventArgs | - Provides data for the DragDrop event. |
| Leadtools.Annotations.Automation.AnnDragDropOperation | - Specifies the current operation for a drag and drop event. |
| Leadtools.Annotations.Automation.AnnObjectChangedType.Metadata | (36) An object metadata is modified. |
| Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs.#ctor | Creates a new instance of AnnObjectModifiedEventArgs with the specified parameters. |
| Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs.changeType | Gets the type of change. |
| Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs.objects | Gets the objects that have been modified. |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks.checkModifier | Gets or sets the keyboard modifier callback |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks.getClipboardData | Gets or sets the callback for getting clipboard. |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks.isClipboardDataPresent | Gets or sets the callback for checking if clipboard data is present. |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks.setClipboardData | Gets or sets the callback for setting clipboard data. |
| Leadtools.Annotations.Automation.IAnnPackage.author | Gets the author name of this package. |
| Leadtools.Annotations.Automation.IAnnPackage.description | Gets a description of this package. |
| Leadtools.Annotations.Automation.IAnnPackage.friendlyName | Gets the friendly name of this package. |
| Leadtools.Annotations.Automation.IAnnPackage.getAutomationObjects | Gets an array of the automation objects contained in this package. |
The following members have been removed:
| Name | Description |
|---|---|
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.#ctor(AnnObjectCollection,AnnObjectChangedType,AnnDesigner) | Initializes a new instance of the Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs class. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.Cancel | Gets or sets a value indicating whether the change should be canceled. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.ChangeType | Gets the type of change. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.Designer | Gets the designer responsible for the change. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.Objects | Gets the objects that have been changed. |
| Leadtools.Annotations.Automation.AnnAutomation.#ctor(AnnAutomationManager,IAnnAutomationControl) | Initializes a new instance of the Leadtools.Annotations.Automation.AnnAutomation class. |
| Leadtools.Annotations.Automation.AnnAutomation.Active | Gets or sets a value indicating whether this Leadtools.Annotations.Automation.AnnAutomation is active. |
| Leadtools.Annotations.Automation.AnnAutomation.AddLayer(AnnLayer,AnnLayer) | Adds a layer to the container. |
| Leadtools.Annotations.Automation.AnnAutomation.AfterObjectChanged | Occurs when an Leadtools.Annotations.Core.AnnObject has changed. |
| Leadtools.Annotations.Automation.AnnAutomation.ApplyAllDecryptors | Applies all the decryptor Leadtools.Annotations.Core.AnnEncryptObject objects in this Leadtools.Annotations.Automation.AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.ApplyAllEncryptors | Applies all the encryptor Leadtools.Annotations.Core.AnnEncryptObject objects in this Leadtools.Annotations.Automation.AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.ApplyDecryptor | Applies the decryptor Leadtools.Annotations.Core.AnnEncryptObject that is currently being edited (selected). |
| Leadtools.Annotations.Automation.AnnAutomation.ApplyEncryptor | Applies the encryptor Leadtools.Annotations.Core.AnnEncryptObject object currently being edited (selected). |
| Leadtools.Annotations.Automation.AnnAutomation.Attach(IAnnAutomationControl) | Attaches this Leadtools.Annotations.Automation.AnnAutomation object to a Leadtools.Annotations.Core~Leadtools.Annotations.Core.IAnnAutomationControl object. |
| Leadtools.Annotations.Automation.AnnAutomation.AttachContainer(AnnContainer,AnnAutomationUndoRedoObject) | Attaches this Leadtools.Annotations.Automation.AnnAutomation object to a container and optional undo/redo object. |
| Leadtools.Annotations.Automation.AnnAutomation.AutomationControl | Gets the automation control for this Leadtools.Annotations.Automation.AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.BeforeObjectChanged | Occurs when an Leadtools.Annotations.Core.AnnObject is about to be changed. |
| Leadtools.Annotations.Automation.AnnAutomation.BeginUndo | Creates a new undo node in this Leadtools.Annotations.Automation.AnnAutomation object. |
| Leadtools.Annotations.Automation.AnnAutomation.BringLayerToFront(bool) | Brings the currently selected layer up in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.BringToFront(bool) | Brings the currently selected object(s) up in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanApplyAllDecryptors | Gets a value that indicates whether any decryptor Leadtools.Annotations.Core.AnnEncryptObject object in this Leadtools.Annotations.Automation.AnnAutomation can be applied. |
| Leadtools.Annotations.Automation.AnnAutomation.CanApplyAllEncryptors | Gets a value that indicates whether any encryptor Leadtools.Annotations.Core.AnnEncryptObject object in this Leadtools.Annotations.Automation.AnnAutomation can be applied. |
| Leadtools.Annotations.Automation.AnnAutomation.CanApplyDecryptor | Gets a value that indicates whether the object currently being edited is a decryptor Leadtools.Annotations.Core.AnnEncryptObject and can be applied. |
| Leadtools.Annotations.Automation.AnnAutomation.CanApplyEncryptor | Gets a value that indicates whether the object currently being edited (selected) is an encryptor Leadtools.Annotations.Core.AnnEncryptObject and can be applied. |
| Leadtools.Annotations.Automation.AnnAutomation.CanBringLayerToFirst | Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where a layer can be brought up to the top of the z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanBringLayerToFront | Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where a layer can be brought up the z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanBringToFirst | Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation can bring the currently selected object(s) to the top of the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanBringToFront | Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation can bring the currently selected object(s) up in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.Cancel | Cancels the operation currently being performed in this Leadtools.Annotations.Automation.AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.CancelUndo | Cancels the undo node started in this Leadtools.Annotations.Automation.AnnAutomation object. |
| Leadtools.Annotations.Automation.AnnAutomation.CanCopy | Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where objects can be copied to the clipboard. |
| Leadtools.Annotations.Automation.AnnAutomation.CanDeleteObjects | Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where objects can be deleted. |
| Leadtools.Annotations.Automation.AnnAutomation.CanFlip | Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where objects can be flipped. |
| Leadtools.Annotations.Automation.AnnAutomation.CanGroup | Gets a value indicating whether this Leadtools.Annotations.Automation.AnnAutomation is in a state where objects can be grouped together. |
| Leadtools.Annotations.Automation.AnnAutomation.CanLock | Gets a value that indicates whether the object currently being edited (selected) can be locked. |
| Leadtools.Annotations.Automation.AnnAutomation.CanPaste | Gets a value that indicates whether the clipboard contains annotation objects that can be pasted. |
| Leadtools.Annotations.Automation.AnnAutomation.CanRealizeAllRedactions | Gets a value that indicates whether any of the Leadtools.Annotations.Core.AnnRedactionObject objects in this Leadtools.Annotations.Automation.AnnAutomation can be realized. |
| Leadtools.Annotations.Automation.AnnAutomation.CanRealizeRedaction | Gets a value that indicates whether the object currently being edited (selected) is an Leadtools.Annotations.Core.AnnRedactionObject and can be realized. |
| Leadtools.Annotations.Automation.AnnAutomation.CanRedo | Gets a value indicating whether the user can redo the previous operation performed in this Leadtools.Annotations.Automation.AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.CanResetRotatePoints | Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where the selected Leadtools.Annotations.Core.AnnObject is able to have its rotate control points reset to the default location. |
| Leadtools.Annotations.Automation.AnnAutomation.CanRestoreAllRedactions | Gets a value that indicates whether any Leadtools.Annotations.Core.AnnRedactionObject objects in this Leadtools.Annotations.Automation.AnnAutomation can be restored. |
| Leadtools.Annotations.Automation.AnnAutomation.CanRestoreRedaction | Gets a value that indicates whether the object currently being edited (selected) is a Leadtools.Annotations.Core.AnnRedactionObject and can be restored. |
| Leadtools.Annotations.Automation.AnnAutomation.CanSelectNone | Gets a value indicating whether this Leadtools.Annotations.Automation.AnnAutomation is in a state where it can deselect objects. |
| Leadtools.Annotations.Automation.AnnAutomation.CanSelectObjects | Gets a value that indicate whether the this Leadtools.Annotations.Automation.AnnAutomation is in a state where any object can be selected. |
| Leadtools.Annotations.Automation.AnnAutomation.CanSendLayerToBack | Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where a layer can be sent down the z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanSendLayerToLast | Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where a layer can be sent to end of the z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanSendToBack | Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation can send the currently selected object(s) down in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanSendToLast | Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation can send the currently selected object(s) to the bottom of the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanShowObjectContextMenu | Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where the object context menu can be displayed. |
| Leadtools.Annotations.Automation.AnnAutomation.CanShowObjectProperties | Gets a value that indicates whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where the object properties can be displayed. |
| Leadtools.Annotations.Automation.AnnAutomation.CanShowProperties | Gets a value that indicate whether this Leadtools.Annotations.Automation.AnnAutomation is currently in a state where the user properties dialog can be displayed. |
| Leadtools.Annotations.Automation.AnnAutomation.CanUndo | Gets a value that indicates whether the user can undo the previous operation performed in this Leadtools.Annotations.Automation.AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.CanUngroup | Gets a value indicating whether this Leadtools.Annotations.Automation.AnnAutomation is in a state where objects can be ungrouped. |
| Leadtools.Annotations.Automation.AnnAutomation.CanUnlock | Gets a value that indicates whether the object currently being edited (selected) can be unlocked. |
| Leadtools.Annotations.Automation.AnnAutomation.Container | Gets the Leadtools.Annotations.Core.AnnContainer of this Leadtools.Annotations.Automation.AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.Copy | Copies the objects currently being edited to the clipboard. |
| Leadtools.Annotations.Automation.AnnAutomation.CurrentDesigner | Gets the current working designer. |
| Leadtools.Annotations.Automation.AnnAutomation.CurrentDesignerChanged | Occurs when the current designer has been changed. |
| Leadtools.Annotations.Automation.AnnAutomation.CurrentEditObject | Gets the current Leadtools.Annotations.Core.AnnObject being edited. |
| Leadtools.Annotations.Automation.AnnAutomation.DeleteLayer(AnnLayer,bool) | Delets a layer from the container |
| Leadtools.Annotations.Automation.AnnAutomation.DeleteSelectedObjects | Deletes the selected objects from this Leadtools.Annotations.Automation.AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.DeserializeObjectError | Occurs when an error occur during an object serialization operation. |
| Leadtools.Annotations.Automation.AnnAutomation.Detach | Detaches this Leadtools.Annotations.Automation.AnnAutomation object from its Leadtools.Annotations.Core.IAnnAutomationControl object. |
| Leadtools.Annotations.Automation.AnnAutomation.Draw | Occurs when an Leadtools.Annotations.Core.AnnObject is being drawn. |
| Leadtools.Annotations.Automation.AnnAutomation.Edit | Occurs when an Leadtools.Annotations.Core.AnnObject is being edited. |
| Leadtools.Annotations.Automation.AnnAutomation.EditText | Occurs when the text of an Leadtools.Annotations.Core.AnnObject is edited. |
| Leadtools.Annotations.Automation.AnnAutomation.EndDesigner | Ends (and commits) the operation currently being performed in this Leadtools.Annotations.Automation.AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.EndUndo | Commits the undo node started in this Leadtools.Annotations.Automation.AnnAutomation object. |
| Leadtools.Annotations.Automation.AnnAutomation.Flip(bool) | Flips the objects that are currently being edited (selected) in this Leadtools.Annotations.Automation.AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.GetObjectInvalidateRect(AnnObject) | Gets a Leadtools.LeadRectD object that specifies the current physical rectangle of this Leadtools.Annotations.Core.AnnObject. |
| Leadtools.Annotations.Automation.AnnAutomation.GetUndoRedoObject | Gets an object that contains the current undo/redo object data. |
| Leadtools.Annotations.Automation.AnnAutomation.Invalidate(LeadRectD) | Invalidates the specified region of the automation control. |
| Leadtools.Annotations.Automation.AnnAutomation.InvalidateObject(AnnObject) | Invalidates and re-draws an object. |
| Leadtools.Annotations.Automation.AnnAutomation.LayerFromSelectedObjects(string) | Creates a new layer from the currently selected objects. |
| Leadtools.Annotations.Automation.AnnAutomation.Lock | Locks the object(s) currently being edited (selected). |
| Leadtools.Annotations.Automation.AnnAutomation.LockObject | Occurs when an Leadtools.Annotations.Core.AnnObject is locked. |
| Leadtools.Annotations.Automation.AnnAutomation.Manager | Returns the Leadtools.Annotations.Automation.AnnAutomationManager that this Leadtools.Annotations.Automation.AnnAutomation object belongs to. |
| Leadtools.Annotations.Automation.AnnAutomation.ObjectModified | Occurs when one or more Leadtools.Annotations.Core.AnnObject has changed. |
| Leadtools.Annotations.Automation.AnnAutomation.OnAutomatiOnPointerDown(AnnPointerEventArgs) | Called by the Leadtools.Annotations.Core.IAnnAutomationControl pointer down event. |
| Leadtools.Annotations.Automation.AnnAutomation.OnAutomatiOnPointerUp(AnnPointerEventArgs) | Called by the Leadtools.Annotations.Core.IAnnAutomationControl pointer up event. |
| Leadtools.Annotations.Automation.AnnAutomation.OnCurrentDesignerChanged(EventArgs) | Raises the Leadtools.Annotations.Automation.AnnAutomation.CurrentDesignerChanged event. |
| Leadtools.Annotations.Automation.AnnAutomation.OnShowContextMenu | Occurs when the automation needs to show the context menu when no objects are selected. |
| Leadtools.Annotations.Automation.AnnAutomation.OnShowObjectProperties | Occurs when the automation needs to show the properties dialog of the selected object. |
| Leadtools.Annotations.Automation.AnnAutomation.OnUndoRedoChanged(EventArgs) | Raises the Leadtools.Annotations.Automation.AnnAutomation.UndoRedoChanged event. |
| Leadtools.Annotations.Automation.AnnAutomation.Paste | Copies the annotation objects from the clipboard to this Leadtools.Annotations.Automation.AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.PasteAt(LeadPointD) | Copies the annotation objects from the clipboard to this Leadtools.Annotations.Automation.AnnAutomation at the specified position. |
| Leadtools.Annotations.Automation.AnnAutomation.PasteStringAt(string,LeadPointD) | Copies the annotation objects contained in a serilization object at the specified position. |
| Leadtools.Annotations.Automation.AnnAutomation.RealizeAllRedactions | Realizes all the Leadtools.Annotations.Core.AnnRedactionObject objects in this Leadtools.Annotations.Automation.AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.RealizeRedaction | Realizes the Leadtools.Annotations.Core.AnnRedactionObject object currently being edited (selected). |
| Leadtools.Annotations.Automation.AnnAutomation.Redo | Reapplies the last operation that was undone in this Leadtools.Annotations.Automation.AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.ResetRotatePoints | Resets the rotate control points of the selected Leadtools.Annotations.Core.AnnObject to their default locations. |
| Leadtools.Annotations.Automation.AnnAutomation.RestoreAllRedactions | Restores all of the Leadtools.Annotations.Core.AnnRedactionObject objects in this Leadtools.Annotations.Automation.AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.RestoreCursor | Occurs when the automation has determine that the original cursor needs to be restored. |
| Leadtools.Annotations.Automation.AnnAutomation.RestoreRedaction | Restores the Leadtools.Annotations.Core.AnnRedactionObject object currently being edited (selected). |
| Leadtools.Annotations.Automation.AnnAutomation.Run | Occurs when an Leadtools.Annotations.Core.AnnObject is being run. |
| Leadtools.Annotations.Automation.AnnAutomation.SelectedObjectsChanged | Occurs when the selected object changes. |
| Leadtools.Annotations.Automation.AnnAutomation.SelectLayer(AnnLayer) | Selects a layer in this Leadtools.Annotations.Automation.AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.SelectObject(AnnObject) | Select an object in this Leadtools.Annotations.Automation.AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.SelectObjects(AnnObjectCollection) | Selects an object or a group of objects in this Leadtools.Annotations.Automation.AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.SendLayerToBack(bool) | Sends the currently selected layer down in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.SendToBack(bool) | Sends the currently selected object(s) down in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.SetCursor | Occurs when the automation has determine that the user needs to change the cursor. |
| Leadtools.Annotations.Automation.AnnAutomation.ShowContextMenu | Displays the automation context menu. |
| Leadtools.Annotations.Automation.AnnAutomation.ShowObjectContextMenu | Displays the object context menu. |
| Leadtools.Annotations.Automation.AnnAutomation.ShowObjectProperties | Shows the object properties |
| Leadtools.Annotations.Automation.AnnAutomation.ToolTip | Occurs when the mouse hovers over an annotation object and a tooltip is requested. |
| Leadtools.Annotations.Automation.AnnAutomation.Undo | Reverses the last operation performed in this Leadtools.Annotations.Automation.AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.UndoCapacity | Gets or sets a value that specifies the capacity of the undo/redo buffer. |
| Leadtools.Annotations.Automation.AnnAutomation.UndoRedoChanged | Occurs when the undo or redo buffer changes. |
| Leadtools.Annotations.Automation.AnnAutomation.Unlock | Unlocks the object(s) currently being edited (selected). |
| Leadtools.Annotations.Automation.AnnAutomation.UnlockObject | Occurs when an Leadtools.Annotations.Core.AnnObject is unlocked. |
| Leadtools.Annotations.Automation.AnnAutomationEventArgs.#ctor(object,AnnAutomationObject) | Initializes a new instance of AnnAutomationEvent. |
| Leadtools.Annotations.Automation.AnnAutomationEventArgs.Create(AnnAutomationObject) | Creates a new instance of Leadtools.Annotations.Automation.AnnAutomationEventArgs with the specified parameter. |
| Leadtools.Annotations.Automation.AnnAutomationEventArgs.Object | Gets the current selected automation object. |
| Leadtools.Annotations.Automation.AnnAutomationManager.Automations | Gets the collection of Leadtools.Annotations.Automation.AnnAutomation objects in this Leadtools.Annotations.Automation.AnnAutomationManager. |
| Leadtools.Annotations.Automation.AnnAutomationManager.CancelInactiveDesigners | Gets or sets a value indicating whether any designers in an Leadtools.Annotations.Automation.AnnAutomation are automatically canceled when the automation becomes inactive. |
| Leadtools.Annotations.Automation.AnnAutomationManager.Create(AnnRenderingEngine) | Creates a new instance of Leadtools.Annotations.Automation.AnnAutomationManager with the specified rendering engine. |
| Leadtools.Annotations.Automation.AnnAutomationManager.CreateDefaultObjects | Creates the default automation annotation objects. |
| Leadtools.Annotations.Automation.AnnAutomationManager.CurrentObjectId | Gets or sets the current automation object ID. |
| Leadtools.Annotations.Automation.AnnAutomationManager.CurrentObjectIdChanged | Occurs when the value of the Leadtools.Annotations.Automation.AnnAutomationManager.CurrentObjectId property changes. |
| Leadtools.Annotations.Automation.AnnAutomationManager.CurrentRubberStampType | Gets or sets the current automation rubber stamp object type. |
| Leadtools.Annotations.Automation.AnnAutomationManager.CurrentRubberStampTypeChanged | Occurs when the value of the Leadtools.Annotations.Automation.AnnAutomationManager.CurrentRubberStampType property changes. |
| Leadtools.Annotations.Automation.AnnAutomationManager.EditObjectAfterDraw | Gets or sets a value that indicates whether newly drawn objects are selected (edited). |
| Leadtools.Annotations.Automation.AnnAutomationManager.EnableToolTip | Gets or sets a value that indicate whether firing the Leadtools.Annotations.Automation.AnnAutomation.ToolTip event is enabled |
| Leadtools.Annotations.Automation.AnnAutomationManager.ExtendedModeModifierKey | Gets or sets the extended mode modifier key. |
| Leadtools.Annotations.Automation.AnnAutomationManager.FindObject(AnnObject) | Finds the Leadtools.Annotations.Automation.AnnAutomationObject for a specified Leadtools.Annotations.Core.AnnObject |
| Leadtools.Annotations.Automation.AnnAutomationManager.FindObjectById(int) | Finds the specified Leadtools.Annotations.Automation.AnnAutomationObject by id. |
| Leadtools.Annotations.Automation.AnnAutomationManager.HitTestBehavior | Gets or sets a value that determine how objects are hit-tested through a selection rectangle. |
| Leadtools.Annotations.Automation.AnnAutomationManager.LoadPackage(IAnnPackage,string) | Loads the automation objects from the specified package. |
| Leadtools.Annotations.Automation.AnnAutomationManager.MaintainAspectRatio | Gets or sets a value that indicates whether to preserve the aspect ratio when moving a corner thumb for all Leadtools.Annotations.Designers.AnnEditDesigner derived classes. |
| Leadtools.Annotations.Automation.AnnAutomationManager.MultiSelectModifierKey | Gets or sets the multi-select modifier key. |
| Leadtools.Annotations.Automation.AnnAutomationManager.Objects | Gets the collection of Leadtools.Annotations.Automation.AnnAutomationObject objects in this Leadtools.Annotations.Automation.AnnAutomationManager. |
| Leadtools.Annotations.Automation.AnnAutomationManager.PlatformCallbacks | Gets the platform-specific callbacks for this automation manager. |
| Leadtools.Annotations.Automation.AnnAutomationManager.RedactionRealizePassword | Gets or sets the password to use for realization of Leadtools.Annotations.Core.AnnRedactionObject objects. |
| Leadtools.Annotations.Automation.AnnAutomationManager.RenderingEngine | Gets or sets the rendering engine associated with this Leadtools.Annotations.Automation.AnnAutomationManager. |
| Leadtools.Annotations.Automation.AnnAutomationManager.RotateModifierKey | Gets or sets the rotate modifier key. |
| Leadtools.Annotations.Automation.AnnAutomationManager.RunHitTestBuffer | Gets or sets the hit test buffer for all Leadtools.Annotations.Designers.AnnRunDesigner derived classes. |
| Leadtools.Annotations.Automation.AnnAutomationManager.ShowThumbs | Gets or sets a value that indicates whether to show the thumbs. |
| Leadtools.Annotations.Automation.AnnAutomationManager.ThumbsGap | Gets or sets a value that indicates which thumbs to display in a polyline object. |
| Leadtools.Annotations.Automation.AnnAutomationManager.ThumbsHitTestBuffer | Gets or sets the hit test buffer for all Leadtools.Annotations.Designers.AnnEditDesigner derived classes. |
| Leadtools.Annotations.Automation.AnnAutomationManager.UserMode | Gets or sets the current user mode. |
| Leadtools.Annotations.Automation.AnnAutomationManager.UserModeChanged | Occurs when the value of the Leadtools.Annotations.Automation.AnnAutomationManager.UserMode property changes |
| Leadtools.Annotations.Automation.AnnAutomationObject.ContextMenu | Gets or sets the context menu associated with this Leadtools.Annotations.Automation.AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.DrawCursor | Gets or sets the mouse cursor used when drawing new objects of this Leadtools.Annotations.Automation.AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.DrawDesignerType | Gets or sets the type of the draw designer of this Leadtools.Annotations.Automation.AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.EditDesignerType | Gets or sets the type of the edit designer of this Leadtools.Annotations.Automation.AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.GroupName | Gets or sets the group name for this automation object |
| Leadtools.Annotations.Automation.AnnAutomationObject.Id | Gets or sets the id of this Leadtools.Annotations.Automation.AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.LabelTemplate | Gets or sets the template used when creating labels for this Leadtools.Annotations.Automation.AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.Name | Gets or sets the name of this Leadtools.Annotations.Automation.AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.NextNumber | Gets or sets the next number used when creating labels for this Leadtools.Annotations.Automation.AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.ObjectTemplate | Gets or sets the initial annotation object template of this Leadtools.Annotations.Automation.AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.Renderer | Gets the annotation object renderer for this Leadtools.Annotations.Automation.AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.RunDesignerType | Gets or sets the type of the run designer of this Leadtools.Annotations.Automation.AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.ToolBarImage | Gets or sets the toolbar image associated with this Leadtools.Annotations.Automation.AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.ToolBarToolTipText | Gets or sets the tooltip text associated with this Leadtools.Annotations.Automation.AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.UserData | Gets or sets the user-defined data for this Leadtools.Annotations.Automation.AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.UseRotateThumbs | Enables or disables the use of rotate thumbs of this Leadtools.Annotations.Automation.AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.#ctor(AnnObjectCollection,AnnObjectChangedType,AnnDesigner) | Initializes a new instance of the Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs class. |
| Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.Cancel | Gets or sets a value indicating whether the change should be canceled. |
| Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.ChangeType | Gets the type of change. |
| Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.Designer | Gets the designer responsible for the change. |
| Leadtools.Annotations.Automation.AnnBeforeObjectChangedEventArgs.Objects | Gets the objects that have been changed. |
| Leadtools.Annotations.Automation.AnnBooleanEditor | - Represents an annotation boolean editor. |
| Leadtools.Annotations.Automation.AnnColorEditor | - Represents an annotation color editor. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.#ctor(int,AnnDesignerType,int,bool,bool) | Initializes a new instance of Leadtools.Annotations.Automation.AnnCursorEventArgs with the specified parameters. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.DesignerType | Gets the designer type. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.Id | Gets the id of the current Leadtools.Annotations.Automation.AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.IsRotateCenter | Gets a value that indicate whether the cursor is on the rotate center. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.IsRotateGripper | Gets a value that indicate whether the cursor is on the rotate gripper. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.ThumbIndex | Gets the 0-based thumb index. |
| Leadtools.Annotations.Automation.AnnDoubleEditor | - Represents an annotation double editor. |
| Leadtools.Annotations.Automation.AnnFontEditor | - Represents an annotation font editor. |
| Leadtools.Annotations.Automation.AnnIntegerEditor | - Represents an annotation integer editor. |
| Leadtools.Annotations.Automation.AnnLengthEditor | - Represents an annotation length editor. |
| Leadtools.Annotations.Automation.AnnMediaEditor | - Represents an annotation media editor. |
| Leadtools.Annotations.Automation.AnnObjectEditor | - Represents an annotation object editor. |
| Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs.#ctor(AnnObjectCollection,AnnObjectChangedType) | Creates a new instance of Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs with the specified parameters. |
| Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs.ChangeType | Gets the type of change. |
| Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs.Objects | Gets the objects that have been modified. |
| Leadtools.Annotations.Automation.AnnPictureEditor | - Represents an annotation picture editor. |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks.CheckModifier | Gets or sets the keyboard modifier callback |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks.GetClipboardData | Gets or sets the callback for getting clipboard. |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks.IsClipboardDataPresent | Gets or sets the callback for checking if clipboard data is present. |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks.SetClipboardData | Gets or sets the callback for setting clipboard data. |
| Leadtools.Annotations.Automation.AnnPropertyInfo | - The Leadtools.Annotations.Automation.AnnPropertyInfo class represents a property of some other LEADTOOLS annotation class. |
| Leadtools.Annotations.Automation.AnnSolidColorBrushEditor | - Represents an annotation solid color brush editor. |
| Leadtools.Annotations.Automation.AnnStringEditor | - Represents an annotation string editor. |
| Leadtools.Annotations.Automation.AnnStrokeEditor | - Represents an annotation stroke editor. |
| Leadtools.Annotations.Automation.IAnnEditor | - Defines an interface with properties and methods for editing the properties of annotation objects. |
| Leadtools.Annotations.Automation.IAnnPackage.Author | Gets the author name of this package. |
| Leadtools.Annotations.Automation.IAnnPackage.Description | Gets a description of this package. |
| Leadtools.Annotations.Automation.IAnnPackage.FriendlyName | Gets the friendly name of this package. |
| Leadtools.Annotations.Automation.IAnnPackage.GetAutomationObjects | Gets an array of the automation objects contained in this package. |
| Leadtools.Annotations.Automation.ImageViewerAutomationControl | - Implements Leadtools.Annotations.Core.IAnnAutomationControl for Leadtools.Controls.ImageViewer. |
The following members have been added to the existing types:
| Member | Description |
|---|---|
| Leadtools.Annotations.Automation.AnnAutomationUndoRedoObject | The object holding the undo/redo data for an automation object. |
| Leadtools.Annotations.Automation.AnnAutomation.EndDesigner | Ends (and commits) the operation currently being performed in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.AttachContainer(Leadtools.Annotations.Core.AnnContainer,Leadtools.Annotations.Automation.AnnAutomationUndoRedoObject) | Attaches this AnnAutomation object to a container and optional undo/redo object. |
| Leadtools.Annotations.Automation.AnnAutomation.GetUndoRedoObject | Gets an object that contains the current undo/redo object data. |
| Leadtools.Annotations.Automation.AnnAutomation.ApplyEncryptor | Applies the encryptor AnnEncryptObject object currently being edited (selected). |
| Leadtools.Annotations.Automation.AnnAutomation.ApplyDecryptor | Applies the decryptor AnnEncryptObject that is currently being edited (selected). |
| Leadtools.Annotations.Automation.AnnAutomation.ApplyAllEncryptors | Applies all the encryptor AnnEncryptObject objects in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.ApplyAllDecryptors | Applies all the decryptor AnnEncryptObject objects in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.Copy | Copies the objects currently being edited to the clipboard. |
| Leadtools.Annotations.Automation.AnnAutomation.Paste | Copies the annotation objects from the clipboard to this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.BringToFront(Boolean) | Brings the currently selected object(s) up in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.SendToBack(Boolean) | Sends the currently selected object(s) down in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.Flip(Boolean) | Flips the objects that are currently being edited (selected) in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.ResetRotatePoints | Resets the rotate control points of the selected AnnObject to their default locations. |
| Leadtools.Annotations.Automation.AnnAutomation.ShowObjectProperties | Shows the object properties |
| Leadtools.Annotations.Automation.AnnAutomation.ShowContextMenu | Displays the automation context menu. |
| Leadtools.Annotations.Automation.AnnAutomation.ShowObjectContextMenu | Displays the object context menu. |
| Leadtools.Annotations.Automation.AnnAutomation.GetObjectInvalidateRect(Leadtools.Annotations.Core.AnnObject) | Gets a Leadtools.LeadRectD object that specifies the current physical rectangle of this AnnObject. |
| Leadtools.Annotations.Automation.AnnAutomation.InvalidateObject(Leadtools.Annotations.Core.AnnObject) | Invalidates and re-draws an object. |
| Leadtools.Annotations.Automation.AnnAutomation.PasteAt(Leadtools.LeadPointD) | Copies the annotation objects from the clipboard to this AnnAutomation at the specified location. |
| Leadtools.Annotations.Automation.AnnAutomation.PasteStringAt(String,Leadtools.LeadPointD) | Copies the annotation objects contained in a serialization object at the specified position. |
| Leadtools.Annotations.Automation.AnnAutomation.SendLayerToBack(Boolean) | Sends the currently selected layer down in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.BringLayerToFront(Boolean) | Brings the currently selected layer up in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.SelectLayer(Leadtools.Annotations.Core.AnnLayer) | Selects a layer in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.LayerFromSelectedObjects(String) | Creates a new layer from the currently selected objects. |
| Leadtools.Annotations.Automation.AnnAutomation.AddLayer(Leadtools.Annotations.Core.AnnLayer,Leadtools.Annotations.Core.AnnLayer) | Adds a layer to the container. |
| Leadtools.Annotations.Automation.AnnAutomation.DeleteLayer(Leadtools.Annotations.Core.AnnLayer,Boolean) | Deletes a layer from the container |
| Leadtools.Annotations.Automation.AnnAutomation.OnAutomatiOnPointerDown(Leadtools.Annotations.Core.AnnPointerEventArgs) | Called by the IAnnAutomationControl pointer down event. |
| Leadtools.Annotations.Automation.AnnAutomation.OnAutomatiOnPointerUp(Leadtools.Annotations.Core.AnnPointerEventArgs) | Called by the IAnnAutomationControl pointer up event. |
| Leadtools.Annotations.Automation.AnnAutomation.ToolTip | Occurs when the mouse hovers over an annotation object and a tooltip is requested. |
| Leadtools.Annotations.Automation.AnnAutomation.AfterObjectChanged | Occurs when an AnnObject has changed. |
| Leadtools.Annotations.Automation.AnnAutomation.ObjectModified | Occurs when one or more AnnObject has changed. |
| Leadtools.Annotations.Automation.AnnAutomation.CanApplyEncryptor | Gets a value that indicates whether the object currently being edited (selected) is an encryptor AnnEncryptObject and can be applied. |
| Leadtools.Annotations.Automation.AnnAutomation.CanApplyDecryptor | Gets a value that indicates whether the object currently being edited is a decryptor AnnEncryptObject and can be applied. |
| Leadtools.Annotations.Automation.AnnAutomation.CanApplyAllEncryptors | Gets a value that indicates whether any encryptor AnnEncryptObject object in this AnnAutomation can be applied. |
| Leadtools.Annotations.Automation.AnnAutomation.CanApplyAllDecryptors | Gets a value that indicates whether any decryptor AnnEncryptObject object in this AnnAutomation can be applied. |
| Leadtools.Annotations.Automation.AnnAutomation.CanGroup | Gets a value indicating whether this AnnAutomation is in a state where objects can be grouped together. |
| Leadtools.Annotations.Automation.AnnAutomation.CanUngroup | Gets a value indicating whether this AnnAutomation is in a state where objects can be ungrouped. |
| Leadtools.Annotations.Automation.AnnAutomation.CanCopy | Gets a value that indicates whether this AnnAutomation is currently in a state where objects can be copied to the clipboard. |
| Leadtools.Annotations.Automation.AnnAutomation.CanPaste | Gets a value that indicates whether the clipboard contains annotation objects that can be pasted. |
| Leadtools.Annotations.Automation.AnnAutomation.CanBringToFront | Gets a value that indicates whether this AnnAutomation can bring the currently selected object(s) up in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanBringToFirst | Gets a value that indicates whether this AnnAutomation can bring the currently selected object(s) to the top of the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanSendToBack | Gets a value that indicates whether this AnnAutomation can send the currently selected object(s) down in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanSendToLast | Gets a value that indicates whether this AnnAutomation can send the currently selected object(s) to the bottom of the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanFlip | Gets a value that indicates whether this AnnAutomation is currently in a state where objects can be flipped. |
| Leadtools.Annotations.Automation.AnnAutomation.CanResetRotatePoints | Gets a value that indicates whether this AnnAutomation is currently in a state where the selected AnnObject is able to have its rotate control points reset to the default location. |
| Leadtools.Annotations.Automation.AnnAutomation.CanShowObjectProperties | Gets a value that indicates whether this AnnAutomation is currently in a state where the object properties can be displayed. |
| Leadtools.Annotations.Automation.AnnAutomation.OnShowObjectProperties | Occurs when the automation needs to show the properties dialog of the selected object. |
| Leadtools.Annotations.Automation.AnnAutomation.OnShowContextMenu | Occurs when the automation needs to show the context menu when no objects are selected. |
| Leadtools.Annotations.Automation.AnnAutomation.CanShowObjectContextMenu | Gets a value that indicates whether this AnnAutomation is currently in a state where the object context menu can be displayed. |
| Leadtools.Annotations.Automation.AnnAutomation.CanSelectNone | Gets a value indicating whether this AnnAutomation is in a state where it can deselect objects. |
| Leadtools.Annotations.Automation.AnnAutomation.SetCursor | Occurs when the automation has determine that the user needs to change the cursor. |
| Leadtools.Annotations.Automation.AnnAutomation.RestoreCursor | Occurs when the automation has determine that the original cursor needs to be restored. |
| Leadtools.Annotations.Automation.AnnAutomation.DeserializeObjectError | Occurs when an error occur during an object serialization operation. |
| Leadtools.Annotations.Automation.AnnAutomation.CanSendLayerToLast | Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be sent to end of the z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanSendLayerToBack | Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be sent down the z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanBringLayerToFront | Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be brought up the z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanBringLayerToFirst | Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be brought up to the top of the z-order. |
| Leadtools.Annotations.Automation.AnnGetClipboardDataCallback | Callback to get the current annotation data for a clipboard paste operation. |
| Leadtools.Annotations.Automation.AnnSetClipboardDataCallback | Callback to set the current annotation data for a clipboard copy operation. |
| Leadtools.Annotations.Automation.AnnIsClipboardDataPresentCallback | Callback to determine whether a clipboard paste operation can be performed. |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks | Platform-specific callbacks used by the automation manager. |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks (Constructor) | Creates a new instance of AnnPlatformCallbacks |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks.CheckModifier | Gets or sets the keyboard modifier callback |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks.GetClipboardData | Gets or sets the callback for getting clipboard. |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks.SetClipboardData | Gets or sets the callback for setting clipboard data. |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks.IsClipboardDataPresent | Gets or sets the callback for checking if clipboard data is present. |
| Leadtools.Annotations.Automation.AnnAutomationManager.Create(Leadtools.Annotations.Core.AnnRenderingEngine) | Creates a new instance of AnnAutomationManager with the specified rendering engine. |
| Leadtools.Annotations.Automation.AnnAutomationManager.FindObject(Leadtools.Annotations.Core.AnnObject) | Finds the AnnAutomationObject for a specified AnnObject |
| Leadtools.Annotations.Automation.AnnAutomationManager.LoadPackage(Leadtools.Annotations.Automation.IAnnPackage,String) | Loads the automation objects from the specified package. |
| Leadtools.Annotations.Automation.AnnAutomationManager.RenderingEngine | Gets or sets the rendering engine associated with this AnnAutomationManager. |
| Leadtools.Annotations.Automation.AnnAutomationManager.CurrentRubberStampTypeChanged | Occurs when the value of the CurrentRubberStampType property changes. |
| Leadtools.Annotations.Automation.AnnAutomationManager.CurrentRubberStampType | Gets or sets the current automation rubber stamp object type. |
| Leadtools.Annotations.Automation.AnnAutomationManager.RotateModifierKey | Gets or sets the rotate modifier key. |
| Leadtools.Annotations.Automation.AnnAutomationManager.ExtendedModeModifierKey | Gets or sets the extended mode modifier key. |
| Leadtools.Annotations.Automation.AnnAutomationManager.MultiSelectModifierKey | Gets or sets the multi-select modifier key. |
| Leadtools.Annotations.Automation.AnnAutomationManager.HitTestBehavior | Gets or sets a value that determine how objects are hit-tested through a selection rectangle. |
| Leadtools.Annotations.Automation.AnnAutomationManager.EnableToolTip | Gets or sets a value that indicate whether firing the ToolTip event is enabled |
| Leadtools.Annotations.Automation.AnnAutomationManager.PlatformCallbacks | Gets the platform-specific callbacks for this automation manager. |
| Leadtools.Annotations.Automation.AnnAutomationObject.UserData | Gets or sets the user-defined data for this AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.ToolBarToolTipText | Gets or sets the tooltip text associated with this AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.DrawCursor | Gets or sets the mouse cursor used when drawing new objects of this AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.ContextMenu | Gets or sets the context menu associated with this AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.ToolBarImage | Gets or sets the toolbar image associated with this AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.NextNumber | Gets or sets the next number used when creating labels for this AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.LabelTemplate | Gets or sets the template used when creating labels for this AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.GroupName | Gets or sets the group name for this automation object |
| Leadtools.Annotations.Automation.AnnIntegerEditor | Represents an annotation integer editor. |
| Leadtools.Annotations.Automation.AnnIntegerEditor(Int32,String) (Constructor) | Initializes a new instance of Leadtools.Annotations.Automation.AnnBooleanEditor. |
| Leadtools.Annotations.Automation.AnnIntegerEditor.Properties | Gets the list of properties that are available for editing. |
| Leadtools.Annotations.Automation.AnnIntegerEditor.Category | Gets the category of this editor. |
| Leadtools.Annotations.Automation.AnnIntegerEditor.OnValueChanged | Occurs when the value has changed. |
| Leadtools.Annotations.Automation.AnnIntegerEditor.Value | Gets or sets the value. |
| Leadtools.Annotations.Automation.AnnPictureEditor | Represents an annotation picture editor. |
| Leadtools.Annotations.Automation.AnnPictureEditor(Leadtools.Annotations.Core.AnnPicture,String) (Constructor) | Initializes a new instance of Leadtools.Annotations.Automation.AnnBooleanEditor. |
| Leadtools.Annotations.Automation.AnnPictureEditor.Properties | Gets the list of properties that are available for editing. |
| Leadtools.Annotations.Automation.AnnPictureEditor.Category | Gets the category of this editor. |
| Leadtools.Annotations.Automation.AnnPictureEditor.OnValueChanged | Occurs when the value has changed. |
| Leadtools.Annotations.Automation.AnnPictureEditor.Value | Gets or sets the value. |
| Leadtools.Annotations.Automation.AnnMediaEditor | Represents an annotation media editor. |
| Leadtools.Annotations.Automation.AnnMediaEditor(Leadtools.Annotations.Core.AnnMedia,String) (Constructor) | Initializes a new instance of Leadtools.Annotations.Automation.AnnBooleanEditor. |
| Leadtools.Annotations.Automation.AnnMediaEditor.Properties | Gets the list of properties that are available for editing. |
| Leadtools.Annotations.Automation.AnnMediaEditor.Category | Gets the category of this editor. |
| Leadtools.Annotations.Automation.AnnMediaEditor.OnValueChanged | Occurs when the value has changed. |
| Leadtools.Annotations.Automation.AnnMediaEditor.Value | Gets or sets the value. |
| Leadtools.Annotations.Automation.IAnnPackage | Provide support for packaging a group of annotation objects. |
| Leadtools.Annotations.Automation.IAnnPackage.GetAutomationObjects | Gets an array of the automation objects contained in this package. |
| Leadtools.Annotations.Automation.IAnnPackage.Author | Gets the author name of this package. |
| Leadtools.Annotations.Automation.IAnnPackage.Description | Gets a description of this package. |
| Leadtools.Annotations.Automation.IAnnPackage.FriendlyName | Gets the friendly name of this package. |
| Leadtools.Annotations.Automation.ImageViewerAutomationControl(Leadtools.Controls.ImageViewer,Leadtools.Annotations.Core.AnnRenderingEngine) (Constructor) | Creates a new instance of IAnnAutomationControl for the ImageViewer |
| Leadtools.Annotations.Automation.ImageViewerAutomationControl.HandleLostFocus(Leadtools.Html.ElementEvent) | Must be called by the application when the control loses the focus. |
| Leadtools.Annotations.Automation.ImageViewerAutomationControl.HandleGotFocus(Leadtools.Html.ElementEvent) | Must be called by the application when the control receives the focus. |
| Leadtools.Annotations.Automation.ImageViewerAutomationControl.PutImageData(Leadtools.Html.ImageData,Leadtools.LeadPointD) | Puts the image data in the specified area in the image inside the control. |
| Leadtools.Annotations.Automation.AnnObjectChangedType.Added | An object is added. |
| Leadtools.Annotations.Automation.AnnObjectChangedType.Modified | An object is modified. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs | Provides data for the AnnAutomation.AfterObjectChanged event. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs(Leadtools.Annotations.Core.AnnObjectCollection,Leadtools.Annotations.Automation.AnnObjectChangedType,Leadtools.Annotations.Designers.AnnDesigner) (Constructor) | Initializes a new instance of the AnnAfterObjectChangedEventArgs class. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.Objects | Gets the objects that have been changed. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.ChangeType | Gets the type of change. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.Designer | Gets the designer responsible for the change. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.Cancel | Gets or sets a value indicating whether the change should be canceled. |
| Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs | Provides data for the ObjectModified event. |
| Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs(Leadtools.Annotations.Core.AnnObjectCollection,Leadtools.Annotations.Automation.AnnObjectChangedType) (Constructor) | Creates a new instance of AnnObjectModifiedEventArgs with the specified parameters. |
| Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs.Objects | Gets the objects that have been modified. |
| Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs.ChangeType | Gets the type of change. |
| Leadtools.Annotations.Automation.AnnAutomationEventArgs | Provides data for the AnnAutomation.OnShowContextMenu and AnnAutomation.OnShowContextMenu events. |
| Leadtools.Annotations.Automation.AnnAutomationEventArgs (Constructor) | Initializes a new instance of AnnAutomationEventArgs. |
| Leadtools.Annotations.Automation.AnnAutomationEventArgs.Create(Leadtools.Annotations.Automation.AnnAutomationObject) | Creates a new instance of AnnAutomationEventArgs with the specified parameter. |
| Leadtools.Annotations.Automation.AnnAutomationEventArgs.Object | Gets the current selected automation object. |
| Leadtools.Annotations.Automation.AnnDesignerType | Defines an annotation designer type. |
| Leadtools.Annotations.Automation.AnnDesignerType.None | None |
| Leadtools.Annotations.Automation.AnnDesignerType.Draw | The designer is AnnDrawDesigner |
| Leadtools.Annotations.Automation.AnnDesignerType.Run | The designer is AnnRunDesigner |
| Leadtools.Annotations.Automation.AnnDesignerType.Edit | The designer is AnnEditDesigner |
| Leadtools.Annotations.Automation.AnnCursorEventArgs | Provides data for the AnnAutomation.SetCursor event. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs(Int32,Leadtools.Annotations.Automation.AnnDesignerType,Int32,Boolean,Boolean) (Constructor) | Initializes a new instance of AnnCursorEventArgs with the specified parameters. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.Id | Gets the id of the current AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.DesignerType | Gets the designer type. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.ThumbIndex | Gets the 0-based thumb index. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.IsRotateCenter | Gets a value that indicate whether the cursor is on the rotate center. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.IsRotateGripper | Gets a value that indicate whether the cursor is on the rotate gripper. |
The following types have been added in LEADTOOLS v18:
| Type | Description |
|---|---|
| Leadtools.Annotations.Automation.AnnAutomation.EndDesigner JavaScript | Ends and commits the operation currently being performed by the AnnAutomation. |
The following Library has been added to LEADTOOLS For .NET v17.5:
| Namespace | Description |
|---|---|
| Leadtools.Annotations.Automation JavaScript | Contains classes for implementing automated mode annotations (with end-user interaction). |