Help Version 19.0.2017.10.27
References ▼
Version Changes: 18 to 19
The following members have been added:
| Name | Description |
|---|---|
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.#ctor | Initializes a new instance of this class. |
| Leadtools.Annotations.Automation.AnnAutomation.ActiveContainer | Gets or sets the active container of the automation. |
| Leadtools.Annotations.Automation.AnnAutomation.ActiveContainerChanged | Occurs when the active container of this object is changed. |
| Leadtools.Annotations.Automation.AnnAutomation.AfterUndoRedo | Occurs after an undo or redo operation. |
| Leadtools.Annotations.Automation.AnnAutomation.AlignBottoms | Aligns the selected objects along with alignment target bottom side. |
| Leadtools.Annotations.Automation.AnnAutomation.AlignCenters | Aligns the selected objects along with alignment target horizontal center. |
| Leadtools.Annotations.Automation.AnnAutomation.AlignLefts | Aligns the selected objects along with alignment target left side. |
| Leadtools.Annotations.Automation.AnnAutomation.AlignMiddles | Aligns the selected objects along with alignment target vertical center. |
| Leadtools.Annotations.Automation.AnnAutomation.AlignRights | Aligns the selected objects along with alignment target rights side. |
| Leadtools.Annotations.Automation.AnnAutomation.AlignTops | Aligns the selected objects along with alignment target top side. |
| Leadtools.Annotations.Automation.AnnAutomation.BeginUpdateContainers | Stops the automation from passing events to the automation control while containers are being added or removed. |
| Leadtools.Annotations.Automation.AnnAutomation.CanAlign | Gets a value that indicates whether this AnnAutomation can align or change the size for selected objects based on alignment target. |
| Leadtools.Annotations.Automation.AnnAutomation.Containers | The list of containers in this AnnAutomation when multi-containers mode is used. |
| Leadtools.Annotations.Automation.AnnAutomation.DefaultCurrentObjectId | Gets or sets the annotations object ID to use when a draw designer finishes its operation. |
| Leadtools.Annotations.Automation.AnnAutomation.DragDrop | Occurs when an AnnObject is being dragged out of a container. |
| Leadtools.Annotations.Automation.AnnAutomation.EditContent | Occurs when the content of an AnnObject is edited. |
| Leadtools.Annotations.Automation.AnnAutomation.EnableDragDrop | Gets or sets a value that indicates whether drag and drop is enabled in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.EndUpdateContainers | Instructs the viewer that updates are completed and rendering of the content can be resumed. |
| Leadtools.Annotations.Automation.AnnAutomation.GetContainerInvalidRect(AnnContainer,bool) | Gets the current invalidate rectangle (the physical location and size) of a container |
| Leadtools.Annotations.Automation.AnnAutomation.GetDefaultCurrentObjectId | Returns the value of the default current object id. |
| Leadtools.Annotations.Automation.AnnAutomation.HitTestContainer(LeadPointD,bool) | Gets the container under the specified location. |
| Leadtools.Annotations.Automation.AnnAutomation.InvalidateContainer(AnnContainer) | Invalidates the specified container and re-renders its content in the automation control. |
| Leadtools.Annotations.Automation.AnnAutomation.InvokeAfterObjectChanged(AnnObjectCollection,AnnObjectChangedType) | Invokes the AfterObjectChanged event with the specified parameters. |
| Leadtools.Annotations.Automation.AnnAutomation.InvokeObjectModified(AnnObjectCollection,AnnObjectChangedType) | Invokes the ObjectModified event with the specified parameters. |
| Leadtools.Annotations.Automation.AnnAutomation.MakeSameHeight | Make the height for selected objects the same with alignment target height. |
| Leadtools.Annotations.Automation.AnnAutomation.MakeSameSize | Make the size for selected objects the same with alignment target size. |
| Leadtools.Annotations.Automation.AnnAutomation.MakeSameWidth | Make the width for selected objects the same with alignment target width. |
| Leadtools.Annotations.Automation.AnnAutomation.OnAfterUndoRedo(EventArgs) | Raises the AfterUndoRedo event. |
| Leadtools.Annotations.Automation.AnnAutomation.OnAutomationPointerDown(AnnPointerEventArgs) | Called by the IAnnAutomationControl pointer down event. |
| Leadtools.Annotations.Automation.AnnAutomation.OnAutomationPointerMove(AnnPointerEventArgs) | Called by the IAnnAutomationControl pointer move event. |
| Leadtools.Annotations.Automation.AnnAutomation.OnAutomationPointerUp(AnnPointerEventArgs) | Called by the IAnnAutomationControl pointer up event. |
| Leadtools.Annotations.Automation.AnnAutomation.OnDragDrop(AnnDragDropEventArgs) | Raises the DragDrop event. |
| Leadtools.Annotations.Automation.AnnAutomationEventArgs.Cancel | Get or sets a value that indicates whether this event is to be cancelled. |
| Leadtools.Annotations.Automation.AnnAutomationManager.DeselectOnDown | Gets or sets a value that indicates whether to de-select any objects as soon as the user clicks down with the cursor or taps using touch on the container outside of its boundaries. |
| Leadtools.Annotations.Automation.AnnAutomationManager.EditContentAfterDraw | Gets or sets a value that indicates whether the EditContent event should occur automatically after the designer has successfully finished drawing a new object. |
| Leadtools.Annotations.Automation.AnnAutomationManager.EditTextAfterDraw | Gets or sets a value that indicates whether the EditText event should occur automatically after the designer has successfully finished drawing a new text object. |
| Leadtools.Annotations.Automation.AnnAutomationManager.EnableDeselectObject | Gets or sets a value that indicates whether clicking on an already selected object while the MultiSelectModifierKey is pressed should de-select it. |
| Leadtools.Annotations.Automation.AnnAutomationManager.EnableObjectsAlignment | Gets or sets a value that indicates whether you can align selected objects based on one of them. |
| Leadtools.Annotations.Automation.AnnAutomationManager.EnablePartialDrop | Gets or sets a value that indicates whether to allow partial drop of annotation objects between multiple containers. |
| Leadtools.Annotations.Automation.AnnAutomationManager.EnableThumbsSelection | Gets or sets a value that indicates whether clicking on any of the thumbs of the objects automatically starts editing. |
| Leadtools.Annotations.Automation.AnnAutomationManager.EndDrawWhenLostFocus | Gets or sets a value indicating whether any designers in an AnnAutomation are automatically canceled when the automation loses focus. |
| Leadtools.Annotations.Automation.AnnAutomationManager.EndEditDesignerBeforeDraw | Gets or sets a value that indicates whether to end the current edit designer when the user starts drawing a new object. |
| Leadtools.Annotations.Automation.AnnAutomationManager.ForceSelectionModifierKey | Gets or sets a value that indicates whether the user can draw the selection object only when one of its key modifiers is pressed. |
| Leadtools.Annotations.Automation.AnnAutomationManager.GroupsRoles | Gets or sets the AnnGroupsRoles associated with this automation manager. |
| Leadtools.Annotations.Automation.AnnAutomationManager.Resources | Gets or sets the annotations resources used by all containers used with this automation manager. |
| Leadtools.Annotations.Automation.AnnAutomationManager.RestrictDesigners | Gets or sets a value that indicates whether the object should be restricted to be inside the container boundary. |
| Leadtools.Annotations.Automation.AnnAutomationManager.SelectionModifierKey | Gets or sets the value of the modifier key that must be pressed in order for the user to start drawing the selection object. |
| Leadtools.Annotations.Automation.AnnAutomationManager.SnapToGridOptions | Gets or sets the default AnnSnapToGridOptions of this AnnAutomationManager. |
| Leadtools.Annotations.Automation.AnnAutomationManager.UsePDFMode | Gets or sets if we are annotating a pdf document or no. |
| Leadtools.Annotations.Automation.AnnAutomationManager.UseRotateThumbs | Gets or sets a value that indicates whether to show the rotation thumbs when an object is selected. |
| Leadtools.Annotations.Automation.AnnAutomationObjects.#ctor | Initializes a new instance of this class. |
| Leadtools.Annotations.Automation.AnnAutomations.#ctor | Initializes a new instance of this class. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.#ctor(int,AnnDesignerType,int,bool,bool,AnnPointerEventArgs,AnnDragDropEventArgs) | Initializes a new instance of AnnCursorEventArgs with the specified parameters. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.DragDropEvent | Gets the drag/drop event data that triggered this event. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.PointerEvent | Gets the original pointer event data that triggered this event. |
| Leadtools.Annotations.Automation.AnnDragDropEventArgs | - Provides data for the DragDrop event. |
| Leadtools.Annotations.Automation.AnnDragDropOperation | - Specifies the current operation for a drag and drop event. |
| Leadtools.Annotations.Automation.AnnGetClipboardDataCallback(AnnAutomation,LeadPointD,string) | - Callback to get the current annotation data for a clipboard paste operation. |
| Leadtools.Annotations.Automation.AnnIsClipboardDataPresentCallback(AnnAutomation,string) | - Callback to determine whether a clipboard paste operation can be performed. |
| Leadtools.Annotations.Automation.AnnObjectChangedType.Metadata | An object metadata is modified. |
| Leadtools.Annotations.Automation.AnnSetClipboardDataCallback(AnnAutomation,string,string) | - Callback to set the current annotation data for a clipboard copy operation. |
The following members have been removed:
| Name | Description |
|---|---|
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.#ctor(AnnObjectCollection,AnnObjectChangedType,AnnDesigner) | Initializes a new instance of the Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs class. |
| Leadtools.Annotations.Automation.AnnAutomation.OnAutomatiOnPointerDown(AnnPointerEventArgs) | Called by the Leadtools.Annotations.Core.IAnnAutomationControl pointer down event. |
| Leadtools.Annotations.Automation.AnnAutomation.OnAutomatiOnPointerUp(AnnPointerEventArgs) | Called by the Leadtools.Annotations.Core.IAnnAutomationControl pointer up event. |
| Leadtools.Annotations.Automation.AnnAutomationEventArgs.#ctor(object,AnnAutomationObject) | Initializes a new instance of AnnAutomationEvent. |
| Leadtools.Annotations.Automation.AnnBooleanEditor | - Represents an annotation boolean editor. |
| Leadtools.Annotations.Automation.AnnColorEditor | - Represents an annotation color editor. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.#ctor(int,AnnDesignerType,int,bool,bool) | Initializes a new instance of Leadtools.Annotations.Automation.AnnCursorEventArgs with the specified parameters. |
| Leadtools.Annotations.Automation.AnnDoubleEditor | - Represents an annotation double editor. |
| Leadtools.Annotations.Automation.AnnFontEditor | - Represents an annotation font editor. |
| Leadtools.Annotations.Automation.AnnGetClipboardDataCallback | - Callback to get the current annotation data for a clipboard paste operation. |
| Leadtools.Annotations.Automation.AnnIntegerEditor | - Represents an annotation integer editor. |
| Leadtools.Annotations.Automation.AnnIsClipboardDataPresentCallback | - Callback to determind whether a clipboard paste operation can be performed. |
| Leadtools.Annotations.Automation.AnnLengthEditor | - Represents an annotation length editor. |
| Leadtools.Annotations.Automation.AnnMediaEditor | - Represents an annotation media editor. |
| Leadtools.Annotations.Automation.AnnObjectEditor | - Represents an annotation object editor. |
| Leadtools.Annotations.Automation.AnnPictureEditor | - Represents an annotation picture editor. |
| Leadtools.Annotations.Automation.AnnPropertyInfo | - The Leadtools.Annotations.Automation.AnnPropertyInfo class represents a property of some other LEADTOOLS annotation class. |
| Leadtools.Annotations.Automation.AnnSetClipboardDataCallback | - Callback to set the current annotation data for a clipboard copy operation. |
| Leadtools.Annotations.Automation.AnnSolidColorBrushEditor | - Represents an annotation solid color brush editor. |
| Leadtools.Annotations.Automation.AnnStringEditor | - Represents an annotation string editor. |
| Leadtools.Annotations.Automation.AnnStrokeEditor | - Represents an annotation stroke editor. |
| Leadtools.Annotations.Automation.IAnnEditor | - Defines an interface with properties and methods for editing the properties of annotation objects. |
| Leadtools.Annotations.Automation.ImageViewerAutomationControl | - Implements Leadtools.Annotations.Core.IAnnAutomationControl for Leadtools.Controls.ImageViewer. |
Android, iOS / macOS, and .NET WinForms support - LEADTOOLS V18 adds Android support to its toolkits through the new LEADTOOLS Android SDK. In addition, iOS / macOS support for its toolkits has been added through the new LEADTOOLS iOS / macOS SDK; and .NET WinForms support has been added through the new LEADTOOLS .NET WinForms SDK. These toolkits provide everything a developer needs to create imaging-enabled Android, iOS / macOS, or .NET WinForms applications.
The following Libraries have been added to LEADTOOLS v18:
| Member | Description |
|---|---|
| Leadtools.Annotations.Automation.AnnAutomationUndoRedoObject | The object holding the undo/redo data for an automation object. |
| Leadtools.Annotations.Automation.AnnAutomation.EndDesigner | Ends (and commits) the operation currently being performed in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.OnUndoRedoChanged(EventArgs) | Raises the UndoRedoChanged event. |
| Leadtools.Annotations.Automation.AnnAutomation.OnCurrentDesignerChanged(EventArgs) | Raises the CurrentDesignerChanged event. |
| Leadtools.Annotations.Automation.AnnAutomation.AttachContainer(Leadtools.Annotations.Core.AnnContainer,Leadtools.Annotations.Automation.AnnAutomationUndoRedoObject) | Attaches this AnnAutomation object to a container and optional undo/redo object. |
| Leadtools.Annotations.Automation.AnnAutomation.GetUndoRedoObject | Gets an object that contains the current undo/redo object data. |
| Leadtools.Annotations.Automation.AnnAutomation.ApplyEncryptor | Applies the encryptor AnnEncryptObject object currently being edited (selected). |
| Leadtools.Annotations.Automation.AnnAutomation.ApplyDecryptor | Applies the decryptor AnnEncryptObject that is currently being edited (selected). |
| Leadtools.Annotations.Automation.AnnAutomation.ApplyAllEncryptors | Applies all the encryptor AnnEncryptObject objects in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.ApplyAllDecryptors | Applies all the decryptor AnnEncryptObject objects in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.Copy | Copies the objects currently being edited to the clipboard. |
| Leadtools.Annotations.Automation.AnnAutomation.Paste | Copies the annotation objects from the clipboard to this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.PasteAt(Leadtools.LeadPointD) | Copies the annotation objects from the clipboard to this AnnAutomation at the specified position. |
| Leadtools.Annotations.Automation.AnnAutomation.PasteStringAt(String,Leadtools.LeadPointD) | Copies the annotation objects contained in a serialization object at the specified position. |
| Leadtools.Annotations.Automation.AnnAutomation.BringToFront(Boolean) | Brings the currently selected object(s) up in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.SendToBack(Boolean) | Sends the currently selected object(s) down in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.Flip(Boolean) | Flips the objects that are currently being edited (selected) in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.ResetRotatePoints | Resets the rotate control points of the selected AnnObject to their default locations. |
| Leadtools.Annotations.Automation.AnnAutomation.ShowObjectProperties | Shows the object properties |
| Leadtools.Annotations.Automation.AnnAutomation.ShowContextMenu | Displays the automation context menu. |
| Leadtools.Annotations.Automation.AnnAutomation.ShowObjectContextMenu | Displays the object context menu. |
| Leadtools.Annotations.Automation.AnnAutomation.GetObjectInvalidateRect(Leadtools.Annotations.Core.AnnObject) | Gets a LeadRectD object that specifies the current physical rectangle of this AnnObject. |
| Leadtools.Annotations.Automation.AnnAutomation.InvalidateObject(Leadtools.Annotations.Core.AnnObject) | Invalidates and re-draws an object. |
| Leadtools.Annotations.Automation.AnnAutomation.Copy(Context) (Java) | Copies the objects currently being edited to the clipboard. |
| Leadtools.Annotations.Automation.AnnAutomation.CanPaste(Context) (Java) | Gets a value that indicates whether the clipboard contains annotation objects that can be pasted. |
| Leadtools.Annotations.Automation.AnnAutomation.Paste(Context) (Java) | Copies the annotation objects from the clipboard to this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.PasteAt(Context,Leadtools.LeadPointD) (Java) | Copies the annotation objects from the clipboard to this AnnAutomation at the specified position. |
| Leadtools.Annotations.Automation.AnnAutomation.SendLayerToBack(Boolean) | Sends the currently selected layer down in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.BringLayerToFront(Boolean) | Brings the currently selected layer up in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.SelectLayer(Leadtools.Annotations.Core.AnnLayer) | Selects a layer in this AnnAutomation. |
| Leadtools.Annotations.Automation.AnnAutomation.LayerFromSelectedObjects(String) | Creates a new layer from the currently selected objects. |
| Leadtools.Annotations.Automation.AnnAutomation.AddLayer(Leadtools.Annotations.Core.AnnLayer,Leadtools.Annotations.Core.AnnLayer) | Adds a layer to the container. |
| Leadtools.Annotations.Automation.AnnAutomation.DeleteLayer(Leadtools.Annotations.Core.AnnLayer,Boolean) | Deletes a layer from the container |
| Leadtools.Annotations.Automation.AnnAutomation.OnAutomatiOnPointerDown(Leadtools.Annotations.Core.AnnPointerEventArgs) | Called by the IAnnAutomationControl pointer down event. |
| Leadtools.Annotations.Automation.AnnAutomation.OnAutomatiOnPointerUp(Leadtools.Annotations.Core.AnnPointerEventArgs) | Called by the IAnnAutomationControl pointer up event. |
| Leadtools.Annotations.Automation.AnnAutomation.ToolTip | Occurs when the mouse hovers over an annotation object and a tooltip is requested. |
| Leadtools.Annotations.Automation.AnnAutomation.AfterObjectChanged | Occurs when an AnnObject has changed. |
| Leadtools.Annotations.Automation.AnnAutomation.ObjectModified | Occurs when one or more AnnObject has changed. |
| Leadtools.Annotations.Automation.AnnAutomation.CanApplyEncryptor | Gets a value that indicates whether the object currently being edited (selected) is an encryptor AnnEncryptObject and can be applied. |
| Leadtools.Annotations.Automation.AnnAutomation.CanApplyDecryptor | Gets a value that indicates whether the object currently being edited is a decryptor AnnEncryptObject and can be applied. |
| Leadtools.Annotations.Automation.AnnAutomation.CanApplyAllEncryptors | Gets a value that indicates whether any encryptor AnnEncryptObject object in this AnnAutomation can be applied. |
| Leadtools.Annotations.Automation.AnnAutomation.CanApplyAllDecryptors | Gets a value that indicates whether any decryptor AnnEncryptObject object in this AnnAutomation can be applied. |
| Leadtools.Annotations.Automation.AnnAutomation.CanGroup | Gets a value indicating whether this AnnAutomation is in a state where objects can be grouped together. |
| Leadtools.Annotations.Automation.AnnAutomation.CanUngroup | Gets a value indicating whether this AnnAutomation is in a state where objects can be ungrouped. |
| Leadtools.Annotations.Automation.AnnAutomation.CanCopy | Gets a value that indicates whether this AnnAutomation is currently in a state where objects can be copied to the clipboard. |
| Leadtools.Annotations.Automation.AnnAutomation.CanPaste | Gets a value that indicates whether the clipboard contains annotation objects that can be pasted. |
| Leadtools.Annotations.Automation.AnnAutomation.CanBringToFront | Gets a value that indicates whether this AnnAutomation can bring the currently selected object(s) up in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanBringToFirst | Gets a value that indicates whether this AnnAutomation can bring the currently selected object(s) to the top of the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanSendToBack | Gets a value that indicates whether this AnnAutomation can send the currently selected object(s) down in the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanSendToLast | Gets a value that indicates whether this AnnAutomation can send the currently selected object(s) to the bottom of the Z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanFlip | Gets a value that indicates whether this AnnAutomation is currently in a state where objects can be flipped. |
| Leadtools.Annotations.Automation.AnnAutomation.CanResetRotatePoints | Gets a value that indicates whether this AnnAutomation is currently in a state where the selected AnnObject is able to have its rotate control points reset to the default location. |
| Leadtools.Annotations.Automation.AnnAutomation.CanShowObjectProperties | Gets a value that indicates whether this AnnAutomation is currently in a state where the object properties can be displayed. |
| Leadtools.Annotations.Automation.AnnAutomation.OnShowObjectProperties | Occurs when the automation needs to show the properties dialog of the selected object. |
| Leadtools.Annotations.Automation.AnnAutomation.OnShowContextMenu | Occurs when the automation needs to show the context menu when no objects are selected. |
| Leadtools.Annotations.Automation.AnnAutomation.CanShowObjectContextMenu | Gets a value that indicates whether this AnnAutomation is currently in a state where the object context menu can be displayed. |
| Leadtools.Annotations.Automation.AnnAutomation.CanSelectNone | Gets a value indicating whether this AnnAutomation is in a state where it can deselect objects. |
| Leadtools.Annotations.Automation.AnnAutomation.SetCursor | Occurs when the automation has determine that the user needs to change the cursor. |
| Leadtools.Annotations.Automation.AnnAutomation.RestoreCursor | Occurs when the automation has determine that the original cursor needs to be restored. |
| Leadtools.Annotations.Automation.AnnAutomation.DeserializeObjectError | Occurs when an error occur during an object serialization operation. |
| Leadtools.Annotations.Automation.AnnAutomation.CanSendLayerToLast | Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be sent to end of the z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanSendLayerToBack | Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be sent down the z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanBringLayerToFront | Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be brought up the z-order. |
| Leadtools.Annotations.Automation.AnnAutomation.CanBringLayerToFirst | Gets a value that indicates whether this AnnAutomation is currently in a state where a layer can be brought up to the top of the z-order. |
| Leadtools.Annotations.Automation.AnnGetClipboardDataCallback | Callback to get the current annotation data for a clipboard paste operation. |
| Leadtools.Annotations.Automation.AnnSetClipboardDataCallback | Callback to set the current annotation data for a clipboard copy operation. |
| Leadtools.Annotations.Automation.AnnIsClipboardDataPresentCallback | Callback to determine whether a clipboard paste operation can be performed. |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks | Platform-specific callbacks used by the automation manager. |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks (Constructor) | Creates a new instance of AnnPlatformCallbacks |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks.CheckModifier | Gets or sets the keyboard modifier callback |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks.GetClipboardData | Gets or sets the callback for getting clipboard. |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks.SetClipboardData | Gets or sets the callback for setting clipboard data. |
| Leadtools.Annotations.Automation.AnnPlatformCallbacks.IsClipboardDataPresent | Gets or sets the callback for checking if clipboard data is present. |
| Leadtools.Annotations.Automation.AnnAutomationManager.Create(Leadtools.Annotations.Core.AnnRenderingEngine) | Creates a new instance of AnnAutomationManager with the specified rendering engine. |
| Leadtools.Annotations.Automation.AnnAutomationManager.FindObject(Leadtools.Annotations.Core.AnnObject) | Finds the AnnAutomationObject for a specified AnnObject |
| Leadtools.Annotations.Automation.AnnAutomationManager.LoadPackage(Leadtools.Annotations.Automation.IAnnPackage,String) | Loads the automation objects from the specified package. |
| Leadtools.Annotations.Automation.AnnAutomationManager.RenderingEngine | Gets or sets the rendering engine associated with this AnnAutomationManager. |
| Leadtools.Annotations.Automation.AnnAutomationManager.CurrentRubberStampTypeChanged | Occurs when the value of the CurrentRubberStampType property changes. |
| Leadtools.Annotations.Automation.AnnAutomationManager.CurrentRubberStampType | Gets or sets the current automation rubber stamp object type. |
| Leadtools.Annotations.Automation.AnnAutomationManager.RotateModifierKey | Gets or sets the rotate modifier key. |
| Leadtools.Annotations.Automation.AnnAutomationManager.ExtendedModeModifierKey | Gets or sets the extended mode modifier key. |
| Leadtools.Annotations.Automation.AnnAutomationManager.MultiSelectModifierKey | Gets or sets the multi-select modifier key. |
| Leadtools.Annotations.Automation.AnnAutomationManager.HitTestBehavior | Gets or sets a value that determine how objects are hit-tested through a selection rectangle. |
| Leadtools.Annotations.Automation.AnnAutomationManager.EnableToolTip | Gets or sets a value that indicate whether firing the ToolTip event is enabled |
| Leadtools.Annotations.Automation.AnnAutomationManager.PlatformCallbacks | Gets the platform-specific callbacks for this automation manager. |
| Leadtools.Annotations.Automation.AnnAutomationObject.UserData | Gets or sets the user-defined data for this AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.ToolBarToolTipText | Gets or sets the tooltip text associated with this AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnAutomationObject.DrawCursor | Gets or sets the mouse cursor used when drawing new objects of this AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.ContextMenu | Gets or sets the context menu associated with this AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.ToolBarImage | Gets or sets the toolbar image associated with this AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.NextNumber | Gets or sets the next number used when creating labels for this AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.LabelTemplate | Gets or sets the template used when creating labels for this AnnAutomationObject |
| Leadtools.Annotations.Automation.AnnAutomationObject.GroupName | Gets or sets the group name for this automation object |
| Leadtools.Annotations.Automation.AnnIntegerEditor | Represents an annotation integer editor. |
| Leadtools.Annotations.Automation.AnnIntegerEditor(Int32,String) (Constructor) | Initializes a new instance of Leadtools.Annotations.Automation.AnnIntegerEditor. |
| Leadtools.Annotations.Automation.AnnIntegerEditor.OnValueChanged | Occurs when the value has changed. |
| Leadtools.Annotations.Automation.AnnIntegerEditor.Category | Gets the category of this editor. |
| Leadtools.Annotations.Automation.AnnIntegerEditor.Properties | Gets the list of properties that are available for editing. |
| Leadtools.Annotations.Automation.AnnIntegerEditor.Value | Gets or sets the value. |
| Leadtools.Annotations.Automation.AnnMediaEditor | Represents an annotation media editor. |
| Leadtools.Annotations.Automation.AnnMediaEditor(Leadtools.Annotations.Core.AnnMedia,String) (Constructor) | Initializes a new instance of Leadtools.Annotations.Automation.AnnMediaEditor. |
| Leadtools.Annotations.Automation.AnnMediaEditor.OnValueChanged | Occurs when the value has changed. |
| Leadtools.Annotations.Automation.AnnMediaEditor.Category | Gets the category of this editor. |
| Leadtools.Annotations.Automation.AnnMediaEditor.Properties | Gets the list of properties that are available for editing. |
| Leadtools.Annotations.Automation.AnnMediaEditor.Value | Gets or sets the value. |
| Leadtools.Annotations.Automation.AnnPictureEditor | Represents an annotation picture editor. |
| Leadtools.Annotations.Automation.AnnPictureEditor(Leadtools.Annotations.Core.AnnPicture,String) (Constructor) | Initializes a new instance of Leadtools.Annotations.Automation.AnnPictureEditor. |
| Leadtools.Annotations.Automation.AnnPictureEditor.OnValueChanged | Occurs when the value has changed. |
| Leadtools.Annotations.Automation.AnnPictureEditor.Category | Gets the category of this editor. |
| Leadtools.Annotations.Automation.AnnPictureEditor.Properties | Gets the list of properties that are available for editing. |
| Leadtools.Annotations.Automation.AnnPictureEditor.Value | Gets or sets the value. |
| Leadtools.Annotations.Automation.IAnnPackage | Provide support for packaging a group of annotation objects. |
| Leadtools.Annotations.Automation.IAnnPackage.GetAutomationObjects | Gets an array of the automation objects contained in this package. |
| Leadtools.Annotations.Automation.IAnnPackage.Author | Gets the author name of this package. |
| Leadtools.Annotations.Automation.IAnnPackage.Description | Gets a description of this package. |
| Leadtools.Annotations.Automation.IAnnPackage.FriendlyName | Gets the friendly name of this package. |
| Leadtools.Annotations.Automation.ImageViewerAutomationControl.HandleLostFocus(RoutedEventArgs) | Occurs when the control loses the focus. |
| Leadtools.Annotations.Automation.ImageViewerAutomationControl.HandleGotFocus(RoutedEventArgs) | Occurs when the control receives the focus. |
| Leadtools.Annotations.Automation.ImageViewerAutomationControl.Image | Gets the RasterImage to use when a redaction object is realized or restored. |
| Leadtools.Annotations.Automation.AnnObjectChangedType.Added | An object is added. |
| Leadtools.Annotations.Automation.AnnObjectChangedType.Modified | An object is modified. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs | Provides data for the AnnAutomation.AfterObjectChanged event. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs(Leadtools.Annotations.Core.AnnObjectCollection,Leadtools.Annotations.Automation.AnnObjectChangedType,Leadtools.Annotations.Designers.AnnDesigner) (Constructor) | Initializes a new instance of the AnnAfterObjectChangedEventArgs class. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.Objects | Gets the objects that have been changed. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.ChangeType | Gets the type of change. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.Designer | Gets the designer responsible for the change. |
| Leadtools.Annotations.Automation.AnnAfterObjectChangedEventArgs.Cancel | Gets or sets a value indicating whether the change should be canceled. |
| Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs | Provides data for the AnnAutomation.ObjectModified event. |
| Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs(Leadtools.Annotations.Core.AnnObjectCollection,Leadtools.Annotations.Automation.AnnObjectChangedType) (Constructor) | Creates a new instance of AnnObjectModifiedEventArgs with the specified parameters. |
| Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs.Objects | Gets the objects that have been modified. |
| Leadtools.Annotations.Automation.AnnObjectModifiedEventArgs.ChangeType | Gets the type of change. |
| Leadtools.Annotations.Automation.AnnAutomationEventArgs | Provides data for the AnnAutomation.OnShowContextMenu and AnnAutomation.OnShowContextMenu events. |
| Leadtools.Annotations.Automation.AnnAutomationEventArgs.Create(Leadtools.Annotations.Automation.AnnAutomationObject) | Creates a new instance of AnnAutomationEventArgs with the specified parameter. |
| Leadtools.Annotations.Automation.AnnAutomationEventArgs(Object,Leadtools.Annotations.Automation.AnnAutomationObject) (Constructor) | Initializes a new instance of AnnAutomationEvent. |
| Leadtools.Annotations.Automation.AnnAutomationEventArgs.Object | Gets the current selected automation object. |
| Leadtools.Annotations.Automation.AnnDesignerType | Defines an annotation designer type. |
| Leadtools.Annotations.Automation.AnnDesignerType.None | None |
| Leadtools.Annotations.Automation.AnnDesignerType.Draw | The designer is AnnDrawDesigner |
| Leadtools.Annotations.Automation.AnnDesignerType.Run | The designer is AnnRunDesigner |
| Leadtools.Annotations.Automation.AnnDesignerType.Edit | The designer is AnnEditDesigner |
| Leadtools.Annotations.Automation.AnnCursorEventArgs | Provides data for the AnnAutomation.SetCursor event. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs(Int32,Leadtools.Annotations.Automation.AnnDesignerType,Int32,Boolean,Boolean) (Constructor) | Initializes a new instance of AnnCursorEventArgs with the specified parameters. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.Id | Gets the id of the current AnnAutomationObject. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.DesignerType | Gets the designer type. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.ThumbIndex | Gets the 0-based thumb index. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.IsRotateCenter | Gets a value that indicate whether the cursor is on the rotate center. |
| Leadtools.Annotations.Automation.AnnCursorEventArgs.IsRotateGripper | Gets a value that indicate whether the cursor is on the rotate gripper. |
The following members have been added to the existing types:
| Packages, Frameworks or DLLs | Comments |
|---|---|
| leadtools.annotations.automation.jar | Android support for implementing high-level automated annotations. |
| Leadtools.Annotations.Automation.framework | iOS / macOS support implementing high-level automated annotations. |
| Leadtools.Annotations.Automation.DLL | .NET WinForms support implementing high-level automated annotations. |
For more information, refer to New in 18.
The following Library has been added to LEADTOOLS v17.5:
| Assemblies | Metadata | Comments |
|---|---|---|
| Leadtools.Annotations.Automation.DLL | N/A | The AnnAutomation class contains properties, methods and events for implementing high-level automated annotations. |
The LEADTOOLS WinRT Module is a powerful collection of WinRT libraries that enable developers to extend LEADTOOLS advanced imaging functionality into their WinRT (Windows Store) applications. The module includes viewer controls that recognize mouse and multi-touch input and feature interactive modes including pan, scale, pinch and zoom, and a magnifying glass.