←Select platform

NativeOcrZoneFillMethod Enumeration

Summary

Possible content types of the zones

Syntax

Java

WinRT C#

C++

[SerializableAttribute()] 
public enum NativeOcrZoneFillMethod

<SerializableAttribute()> 
Public Enum NativeOcrZoneFillMethod

[SerializableAttribute()] 
public enum NativeOcrZoneFillMethod

public enum NativeOcrZoneFillMethod

Leadtools.Forms.Ocr.NativeOcrZoneFillMethod = function() { }; 
Leadtools.Forms.Ocr.NativeOcrZoneFillMethod.prototype = { 
 
  Default = 0, 
    OmniFont = 1, 
    Omr = 2, 
    Icr = 3, 
    DraftDotMatrix9 = 4, 
    DraftDotMatrix24 = 5, 
    OcrA = 6, 
    OcrB = 7, 
    Micr = 8, 
    DotDigit = 9, 
    DashDigit = 10, 
    NoRecognition = 11, 
    Asian = 12, 
    CMC7 = 13, 
     
 };

[SerializableAttribute()] 
public enum class NativeOcrZoneFillMethod

Members

Value	Member	Description
0	Default	Default zone filling method. The IOcrPage.AutoZone(OcrProgressCallback callback) method will set all the fill method of the zones found to this value. You can set the zone filling method to another type by using IOcrPage.AutoZone(OcrZoneParser zoneParser, NativeOcrZoneFillMethod fillMethod, LogicalUnit zonesUnit, OcrProgressCallback callback) with fillMethod set the zone type desired.
1	OmniFont	Omnifont zone filling method. It denotes a machine printed text with any typeface which is not too stylized.
2	Omr	Optical mark zone filling method. It denotes a possible marking within the zone.
3	Icr	Hand-printed zone filling method.
4	DraftDotMatrix9	9-pin draft dot-matrix zone filling method. It denotes a 9-pin draft dot-matrix printout.
5	DraftDotMatrix24	24-pin draft dot-matrix zone filling method. It denotes a 24-pin draft dot-matrix printout.
6	OcrA	OCR-A zone filling method.
7	OcrB	OCR-B zone filling method.
8	Micr	Magnetic ink character filling method. Mostly used in bank checks.
9	DotDigit	Dot-digit zone filling method.
10	DashDigit	Dash-digit zone filling method.
11	NoRecognition	No recognition will be attempted.
12	Asian	The zone contains Asian characters.
13	CMC7	CMC7 zone filling method.

Remarks

Used with engine-specific zones. For more information, refer to IOcrZoneManager.GetNativeZone and IOcrZoneManager.SetNativeZone.

A fill method must have been assigned to all zones in their NativeOcrZone.FillMethod properties before processing.

Not all fill methods are available to all engines. To determine which fill methods are available use IOcrZoneManager.GetSupportedNativeFillMethods. Trying to set a fill method not available to the engine will cause an error.

Each zone needs to be associated with a NativeOcrZoneRecognitionModule and NativeOcrZoneFillMethod. This is needed because some recognition modules support more than one fill method, and some fill methods are accepted by more than one recognition module.

It is important to ensure that the recognition module/fill method pair is suitable. For more information on permitted recognition module/fill method pairs refer to An Overview of OCR Recognition Modules.

Note that the auto-zoning IOcrPage.AutoZone will create the zones with the value NativeOcrZoneFillMethod.Default in their NativeOcrZone.FillMethod properties.

Example

For an example, refer to IOcrPage.AutoZone.

Requirements

Target Platforms