L_DicomChannelSetSamples8

// Function prototypes 
L_INT SetChannelSourceAndSensitivity(HDICOMWAVEFORMCHANNEL  hECGChannel); 
L_INT SetChannelAnnotations(HDICOMWAVEFORMCHANNEL  hECGChannel); 
L_INT InsertECGCChannel(HDICOMWAVEFORMGROUP hECGWaveformGroup, L_INT16* pSamples, L_UINT32 uSampleCount); 
// The main function that creates the 
// waveform group and adds to the dataset 
L_INT DicomChannelSetSamples8Example( 
HDICOMDS hInputDS, 
L_INT16* pSamples, 
L_UINT32 uSampleCount) 
{ 
   HDICOMWAVEFORMGROUP  hECGWaveformGroup = NULL; 
   L_UINT32             uWaveformGroupCount=0; 
   L_UINT32             uIndex=0; 
   L_UINT16             nRet; 
   // Sanity check 
   if(!pSamples || (uSampleCount == 0) || !hInputDS) 
      return ERROR_INV_PARAMETER; 
   // Our new waveform group 
   hECGWaveformGroup = L_DicomWaveGrpCreate(); 
   if(hECGWaveformGroup == NULL) 
      return DICOM_ERROR_NULL_PTR; 
   // Reset the waveform group, we don't 
   // really need to call this! 
   L_DicomWaveGrpReset(hECGWaveformGroup); 
   // Set the number of samples per channel. You can call 
   // L_DicomWaveGrpGetNumberOfSamplesPerChannel to get 
   // the number of samples 
   if(!L_DicomWaveGrpSetNumberOfSamplesPerChannel(hECGWaveformGroup,uSampleCount)) 
   { 
      L_DicomWaveGrpFree(hECGWaveformGroup); 
      return FAILURE - 1; 
   } 
   // Set the sampling frequency. You can call 
   // L_DicomWaveGrpGetSamplingFrequency to 
   // get the sampling frequency 
   L_DicomWaveGrpSetSamplingFrequency(hECGWaveformGroup,240.00); 
   // Set sample interpretation 
   if(!L_DicomWaveGrpSetSampleInterpretation(hECGWaveformGroup,DICOM_SAMPLE_INTERPRETATION_SS)) 
   { 
      L_DicomWaveGrpFree(hECGWaveformGroup); 
      return FAILURE - 1; 
   } 
   // Just in case! 
   if(L_DicomWaveGrpGetSampleInterpretation(hECGWaveformGroup) != DICOM_SAMPLE_INTERPRETATION_SS) 
   { 
      L_DicomWaveGrpFree(hECGWaveformGroup); 
      return FAILURE - 1; 
   } 
   // No Multiplex Group Time Offset 
   // You can call L_DicomWaveGrpGetMultiplexGroupTimeOffset 
   // to get the time offset 
   if(!L_DicomWaveGrpSetMultiplexGroupTimeOffset(hECGWaveformGroup,FALSE, 0.0)) 
   { 
      L_DicomWaveGrpFree(hECGWaveformGroup); 
      return FAILURE - 1; 
   } 
   // No Trigger Time Offset 
   // You can call L_DicomWaveGrpGetTriggerTimeOffset 
   // to get the trigger time offset 
   if(!L_DicomWaveGrpSetTriggerTimeOffset(hECGWaveformGroup,FALSE, 0.0)) 
   { 
      L_DicomWaveGrpFree(hECGWaveformGroup); 
      return FAILURE - 1; 
   } 
   // No Trigger Sample Position 
   // You can call L_DicomWaveGrpGetTriggerSamplePosition 
   // to get the trigger sample position 
   if(!L_DicomWaveGrpSetTriggerSamplePosition(hECGWaveformGroup,FALSE, 0)) 
   { 
      L_DicomWaveGrpFree(hECGWaveformGroup); 
      return FAILURE - 1; 
   } 
   // Waveform originality is original 
   L_DicomWaveGrpSetOriginality(hECGWaveformGroup,DICOM_WAVEFORM_ORIGINALITY_ORIGINAL); 
   // Just in case 
   if(L_DicomWaveGrpGetOriginality(hECGWaveformGroup) != DICOM_WAVEFORM_ORIGINALITY_ORIGINAL) 
   { 
      L_DicomWaveGrpFree(hECGWaveformGroup); 
      return FAILURE - 1; 
   } 
   // Set the multiplex group label 
   if(!L_DicomWaveGrpSetMultiplexGroupLabel(hECGWaveformGroup,TEXT("SCPECG Waveform"))) 
   { 
      L_DicomWaveGrpFree(hECGWaveformGroup); 
      return FAILURE - 1; 
   } 
   if(L_DicomWaveGrpGetMultiplexGroupLabel(hECGWaveformGroup) == NULL) 
   { 
      L_DicomWaveGrpFree(hECGWaveformGroup); 
      return FAILURE - 1; 
   } 
   // Set the Waveform padding value 
   // You can call L_DicomWaveGrpGetPaddingValue 
   // to get the waveform padding value 
   if(!L_DicomWaveGrpSetPaddingValue(hECGWaveformGroup,TRUE,32768)) 
   { 
      L_DicomWaveGrpFree(hECGWaveformGroup); 
      return FAILURE - 1; 
   } 
   nRet = (L_UINT16) InsertECGCChannel(hECGWaveformGroup, pSamples, uSampleCount); 
   if (nRet != DICOM_SUCCESS) 
   { 
      L_DicomWaveGrpFree(hECGWaveformGroup); 
      return nRet; 
   } 
   // Delete any waveform groups that already exist in the dataset 
   uWaveformGroupCount = L_DicomGetWaveformGroupCount(hInputDS); 
   for(uIndex = 0 ; uIndex < uWaveformGroupCount ; uIndex++) 
   { 
      nRet = L_DicomDeleteWaveformGroup(hInputDS,uIndex,0); 
      if (nRet != DICOM_SUCCESS) 
      { 
         L_DicomWaveGrpFree(hECGWaveformGroup); 
         return nRet; 
      } 
   } 
   // Insert the new waveform group into the dataset 
   nRet = L_DicomAddWaveformGroup(hInputDS,hECGWaveformGroup,0, ELEMENT_INDEX_MAX); 
   if(nRet !=  DICOM_SUCCESS) 
   { 
      L_DicomWaveGrpFree(hECGWaveformGroup); 
      return nRet; 
   } 
   L_DicomWaveGrpFree(hECGWaveformGroup); 
   return DICOM_SUCCESS; 
} 
// Add an ECG channel to the group 
L_INT InsertECGCChannel( 
HDICOMWAVEFORMGROUP hECGWaveformGroup, 
L_INT16* pSamples, 
L_UINT32 uSampleCount) 
{ 
   HDICOMWAVEFORMCHANNEL hECGChannel = NULL; 
   L_UINT32 uNumberOfSamples = 0; 
   L_INT32 nChannelNumber = -1; 
   L_INT32 nMinValue = 0; 
   L_INT32 nMaxValue = 0; 
   L_INT nRet; 
   if(hECGWaveformGroup == NULL) 
      return ERROR_INV_PARAMETER; 
   // Add a channel to the group 
   // If you want to create a channel which is not part of a waveform group, then you need to 
   // call the L_DicomChannelCreate function to create it, and then call L_DicomChannelFree to free 
   // it when you are 
   // finished with the channel. This is not recommended, however. 
   // When creating a channel, it is best to call L_DicomWaveGrpAddChannel which creates a channel 
   // as part of a waveform group. 
   hECGChannel = L_DicomWaveGrpAddChannel(hECGWaveformGroup, ELEMENT_INDEX_MAX); 
   if(hECGChannel == NULL) 
      return DICOM_ERROR_NULL_PTR; 
   // If we want to update a channel, we can first call 
   // L_DicomWaveGrpDeleteChannel and then call 
   // L_DicomWaveGrpAddChannel with the same 
   // index we passed to L_DicomWaveGrpDeleteChannel 
   // Make sure that the channel really got added 
   // This is for the purposes of this sample only, because 
   // the check we did in the previous statement is enough 
   if(   (L_DicomWaveGrpGetNumberOfChannels(hECGWaveformGroup) != 1)|| 
      (L_DicomWaveGrpGetChannel(hECGWaveformGroup,0) == NULL) ) 
   return DICOM_ERROR_NULL_PTR; 
   // Sanity checks! 
   if((L_DicomChannelGetWaveformGroup(hECGChannel) != hECGWaveformGroup)|| 
      (L_DicomChannelGetIndex(hECGChannel) != 0)) 
   return DICOM_ERROR_NULL_PTR; 
   /* Set the channel samples 
   The data we are setting in here is 16 bit data. 
   We would call L_DicomChannelSetSamples8 if the data were 8 bit. 
   We can also call L_DicomChannelSetSamples32, which will set the data 
   as either 8-bit or 16-bit depending on the sample interpretation */ 
   if(L_DicomChannelSetSamples16(hECGChannel,pSamples, uSampleCount) != uSampleCount) 
      return FAILURE - 1; 
   // Just in case 
   if((!L_DicomChannelGetSamples(hECGChannel, &uNumberOfSamples))|| 
      (uNumberOfSamples == 0)) 
   return FAILURE - 1; 
   // Set the channel source and sensitivity 
   nRet = SetChannelSourceAndSensitivity(hECGChannel); 
   if(nRet != DICOM_SUCCESS) 
      return nRet; 
   // Set the channel status 
   L_DicomChannelSetStatus(hECGChannel,DICOM_CHANNEL_STATUS_OK); 
   nRet = L_DicomChannelGetStatus(hECGChannel); 
   if(nRet != DICOM_CHANNEL_STATUS_OK) 
      return nRet; 
   // Set the channel time skew. You can call 
   // L_DicomChannelGetTimeSkew to get the time skew 
   // You can also call L_DicomChannelSetSampleSkew 
   // And L_DicomChannelGetSampleSkew to set and get 
   // the channel samples skew 
   if (!L_DicomChannelSetTimeSkew(hECGChannel,0.000000)) 
      return FAILURE - 1; 
   // Set the waveform channel number 
   if(!L_DicomChannelSetNumber(hECGChannel,TRUE, 0)) 
      return FAILURE - 1; 
   if((!L_DicomChannelGetNumber(hECGChannel,&nChannelNumber)) || 
      (nChannelNumber != 0)) 
   return FAILURE - 1; 
   // Set the channel label 
   if(!L_DicomChannelSetLabel(hECGChannel,TEXT("First Channel"))) 
      return FAILURE - 1; 
   if(!L_DicomChannelGetLabel(hECGChannel)) 
      return FAILURE - 1; 
   // No channel offset 
   // You can also call L_DicomChannelGetOffset 
   // To get the channel offset 
   if(!L_DicomChannelSetOffset(hECGChannel,FALSE, 0.0)) 
      return FAILURE - 1; 
   // Set filter low frequency 
   // You can also call L_DicomChannelGetFilterLowFrequency 
   // To get the filter low frequency 
   if(!L_DicomChannelSetFilterLowFrequency(hECGChannel,TRUE, 0.050)) 
      return FAILURE - 1; 
   // Set filter high frequency 
   // You can also call L_DicomChannelGetFilterHighFrequency 
   // To get the filter high frequency 
   if(!L_DicomChannelSetFilterHighFrequency(hECGChannel,TRUE, 100.00)) 
      return FAILURE - 1; 
   // These are hard-coded values! 
   // Set the channel minimum value 
   if(!L_DicomChannelSetMinimumValue(hECGChannel,TRUE, -386)) 
      return FAILURE - 1; 
   // Set the channel maximum value 
   if(!L_DicomChannelSetMaximumValue(hECGChannel,TRUE, 1264)) 
      return FAILURE - 1; 
   // Just in case 
   if((!L_DicomChannelGetMinimumValue(hECGChannel,&nMinValue))|| 
      (nMinValue !=-386)) 
   return FAILURE - 1; 
   // Just in case 
   if((!L_DicomChannelGetMaximumValue(hECGChannel,&nMaxValue))|| 
      (nMaxValue !=1264)) 
   return FAILURE - 1; 
   /* You can also call the following functions to set and get the notch 
   filter frequency and bandwidth 
   L_DicomChannelSetNotchFilterFrequency 
   L_DicomChannelGetNotchFilterFrequency 
   L_DicomChannelSetNotchFilterBandwidth 
   L_DicomChannelGetNotchFilterBandwidth */ 
   // Last, but not least, set the channel annotations! 
   return SetChannelAnnotations(hECGChannel); 
} 
//Set the channel source and sensitivity 
L_INT SetChannelSourceAndSensitivity(HDICOMWAVEFORMCHANNEL hECGChannel) 
{ 
   pDICOMCONTEXTGROUP pCardiologyUnitsGroup; 
   pDICOMCONTEXTGROUP pECGLeadsGroup; 
   L_UINT16           nRet; 
   // Let's use the DICOM context group tables! 
   ///////////////////////Channel Source///////////////////////// 
   // Load the ECG Leads table 
   L_DicomLoadContextGroup(CID_3001); 
   pECGLeadsGroup = L_DicomFindContextGroup(CID_3001); 
   if(pECGLeadsGroup) 
   { 
      // 5.6.3-9-1 is Lead I (Einthoven) 
      pDICOMCODEDCONCEPT pCodedConcept = L_DicomFindCodedConcept( pECGLeadsGroup, 
      TEXT("SCPECG"), 
      TEXT("5.6.3-9-1")); 
      if(pCodedConcept) 
      { 
         DICOMCODESEQUENCEITEM   DicomSourceSequenceItem; 
         L_UINT16                uRet; 
         memset(&DicomSourceSequenceItem , 0 , sizeof(DICOMCODESEQUENCEITEM)); 
         DicomSourceSequenceItem.uStructSize = sizeof(DICOMCODESEQUENCEITEM); 
         DicomSourceSequenceItem.pszCodeValue              = pCodedConcept->pszCodeValue                 ; 
         DicomSourceSequenceItem.pszCodingSchemeDesignator = pCodedConcept->pszCodingSchemeDesignator    ; 
         DicomSourceSequenceItem.pszCodingSchemeVersion    = pCodedConcept->pszCodingSchemeVersion       ; 
         DicomSourceSequenceItem.pszCodeMeaning            = pCodedConcept->pszCodeMeaning               ; 
         // Set the channel source 
         uRet = L_DicomChannelSetSource(hECGChannel,&DicomSourceSequenceItem); 
         if(uRet!= DICOM_SUCCESS) 
            return uRet; 
         // You can call L_DicomChannelGetSource() 
         // to get the channel source 
      } 
      else 
         return DICOM_ERROR_NULL_PTR; 
   } 
   else 
      return DICOM_ERROR_NULL_PTR; 
   ///////////////////////Channel Sensitivity//////////////////////// 
   // Cardiology Units of Measurement 
   nRet = L_DicomLoadContextGroup(CID_3082); 
   if (nRet != DICOM_SUCCESS) 
      return nRet; 
   pCardiologyUnitsGroup = L_DicomFindContextGroup(CID_3082); 
   if(pCardiologyUnitsGroup) 
   { 
      pDICOMCODEDCONCEPT pCodedConcept = L_DicomFindCodedConcept( pCardiologyUnitsGroup, 
      TEXT("UCUM"), 
      TEXT("mV")); 
      if(pCodedConcept) 
      { 
         DICOMCODESEQUENCEITEM   DicomSourceSequenceItem; 
         L_UINT16                uRet; 
         memset(&DicomSourceSequenceItem , 0 , sizeof(DICOMCODESEQUENCEITEM)); 
         DicomSourceSequenceItem.uStructSize = sizeof(DICOMCODESEQUENCEITEM); 
         DicomSourceSequenceItem.pszCodeValue              = pCodedConcept->pszCodeValue                 ; 
         DicomSourceSequenceItem.pszCodingSchemeDesignator = pCodedConcept->pszCodingSchemeDesignator    ; 
         DicomSourceSequenceItem.pszCodingSchemeVersion    = pCodedConcept->pszCodingSchemeVersion       ; 
         DicomSourceSequenceItem.pszCodeMeaning            = pCodedConcept->pszCodeMeaning               ; 
         // Set the channel sensitivity 
         uRet = L_DicomChannelSetSensitivity(   hECGChannel, 
         TRUE, 
         0.001220, 
         &DicomSourceSequenceItem, 
         1.0, 
         0.0); 
         if(uRet  != DICOM_SUCCESS) 
            return uRet; 
         // You can call L_DicomChannelGetSensitivity() 
         // to get the channel sensitivity 
      } 
      else 
         return DICOM_ERROR_NULL_PTR; 
   } 
   else 
      return DICOM_ERROR_NULL_PTR; 
   return DICOM_SUCCESS; 
} 
// Add annotations for the channel 
L_INT SetChannelAnnotations(HDICOMWAVEFORMCHANNEL  hECGChannel) 
{ 
   L_UINT32 uIndex = 0; 
   DICOMWAVEFORMANNOTATION ECGWaveformAnnotation; 
   DICOMCODESEQUENCEITEM CodedName; 
   L_DOUBLE dNumericValue = 69.00; 
   DICOMCODESEQUENCEITEM MeasurementUnits; 
   L_INT nRet; 
   // Delete any existing channel annotations 
   for(uIndex = 0; uIndex < L_DicomChannelGetAnnotationCount(hECGChannel); uIndex++) 
   { 
      if(L_DicomChannelGetAnnotation(hECGChannel,uIndex)) 
         L_DicomChannelDeleteAnnotation(hECGChannel,uIndex); 
   } 
   memset(&ECGWaveformAnnotation,0, sizeof(DICOMWAVEFORMANNOTATION)); 
   ECGWaveformAnnotation.uStructSize = sizeof(DICOMWAVEFORMANNOTATION); 
   // Over here we are populating the DICOMCODESEQUENCEITEM structure 
   // directly. What we can also do is fill it with values from 
   // the LDicomContextGroup table which lists all the context 
   // group tables defined by the DICOM standard.  You can look at 
   // the SetChannelSourceAndSensitivity above for an example on 
   // how to do that 
   memset(&CodedName,0, sizeof(DICOMCODESEQUENCEITEM)); 
   CodedName.uStructSize               = sizeof(DICOMCODESEQUENCEITEM); 
   CodedName.pszCodeValue              = TEXT("8867-4"); 
   CodedName.pszCodeMeaning            = TEXT("Heart rate"); 
   CodedName.pszCodingSchemeDesignator = TEXT("LN"); 
   CodedName.pszCodingSchemeVersion    = TEXT("19971101"); 
   ECGWaveformAnnotation.pCodedName = &CodedName; 
   memset(&MeasurementUnits,0, sizeof(DICOMCODESEQUENCEITEM)); 
   MeasurementUnits.uStructSize               = sizeof(DICOMCODESEQUENCEITEM); 
   MeasurementUnits.pszCodeValue              = TEXT("{H.B.}/min"); 
   MeasurementUnits.pszCodeMeaning            = TEXT("Heart beat per minute"); 
   MeasurementUnits.pszCodingSchemeDesignator = TEXT("UCUM"); 
   MeasurementUnits.pszCodingSchemeVersion    = TEXT("1.4"); 
   ECGWaveformAnnotation.pMeasurementUnits = &MeasurementUnits; 
   ECGWaveformAnnotation.pNumericValue = &dNumericValue ; 
   ECGWaveformAnnotation.uNumericValueCount = 1; 
   nRet = L_DicomChannelAddAnnotation(hECGChannel,&ECGWaveformAnnotation); 
   if(nRet != DICOM_SUCCESS) 
      return nRet; 
   return DICOM_SUCCESS; 
}