TunnelCommand Class

Summary

Places the image inside a tunnel along the Z-axis. This command is available in the Imaging Pro and above toolkits.

Syntax

C++/CLI

Python

public class TunnelCommand : RasterCommand

public ref class TunnelCommand : public RasterCommand

class TunnelCommand(RasterCommand):

Remarks

This command shows the effect of placing images on tunnels along the Z-axis and bending them toward a specific point. These images may be placed above, below, to the left or to the right of the Z-axis. An external light source of the specified color and brightness may be shined on the images. The brightness may vary along the z-axis according to the BrightLength value.
Changing the camera center point, the rotation angle and the viewing screen Z-offset will simulate moving along the axis.
If the image has a region, the effect will be applied on the region dimensions only.
For an example, see the following figure:

The following figure shows the same image, after the effect has been applied:

To obtain this effect, the following settings were used with the command:
1. CenterPoint = new Leadtools.LeadPoint(320, 256)
2. ZValue = 0
3. Distance = 200
4. Radius = 200
5. Repeat = -1
6. RotationOffset = 75
7. Stretch = 25
8. StartBright = 0
9. EndBright = 100
10. BrightLength = 45
11. BrightColor = new Leadtools.RasterColor(255, 255, 255)
12. FillColor = new Leadtools.RasterColor(255, 255, 255)
13. Flags = TunnelCommandFlags.WidthAxis | TunnelCommandFlags.Color
This command supports 12-bit and 16-bit grayscale and 48-bit and 64-bit color images. Support for 12-bit and 16-bit grayscale and 48-bit and 64-bit color images is available only in the Document/Medical toolkits.
This command does not support signed data images.
This command does not support 32-bit grayscale images.

For more information, refer to Introduction to Image Processing With LEADTOOLS. For more information, refer to Correcting Colors.

Tunnel Function - Before

Tunnel Function - After

View additional platform support for this Tunnel function.

Example

Run the TunnelCommand on an image.

using Leadtools; 
using Leadtools.Codecs; 
using Leadtools.ImageProcessing.SpecialEffects; 
 
 
public void TunnelCommandExample() 
{ 
   // Load an image 
   RasterCodecs codecs = new RasterCodecs(); 
   codecs.ThrowExceptionsOnInvalidImages = true; 
 
   RasterImage image = codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, @"ImageProcessingDemo\Beauty16.jpg")); 
 
   // Prepare the command 
   TunnelCommand command = new TunnelCommand(); 
   command.CenterPoint = new LeadPoint(image.Width / 2, image.Height / 2); 
   command.ZValue = 0; 
   command.Distance = image.Height; 
   command.Radius = image.Width / 2; 
   command.Repeat = -1; 
   command.RotationOffset = 0; 
   command.Stretch = 25; 
   command.StartBright = 0; 
   command.EndBright = 100; 
   command.BrightLength = 20000; 
   command.BrightColor = new RasterColor(255, 255, 255); 
   command.FillColor = new RasterColor(0, 0, 0); 
   command.Flags = TunnelCommandFlags.WidthAxis | TunnelCommandFlags.Color; 
   command.Run(image); 
   codecs.Save(image, Path.Combine(LEAD_VARS.ImagesDir, "Result.jpg"), RasterImageFormat.Jpeg, 24); 
 
} 
 
static class LEAD_VARS 
{ 
   public const string ImagesDir = @"C:\LEADTOOLS22\Resources\Images"; 
}