←Select platform

PlaneBendCommand Constructor(LeadPoint,Int32,Int32,Int32,Int32,Int32,Int32,Int32,Int32,Int32,Int32,RasterColor,RasterColor,PlaneCommandFlags)

Summary

Initializes a new PlaneBendCommand class object with explicit parameters.

Syntax

WinRT C#

C++

public PlaneBendCommand(  
   Leadtools.LeadPoint centerPoint, 
   int zValue, 
   int distance, 
   int planeOffset, 
   int repeat, 
   int pyramidAngle, 
   int stretch, 
   int bendFactor, 
   int startBright, 
   int endBright, 
   int brightLength, 
   Leadtools.RasterColor brightColor, 
   Leadtools.RasterColor fillColor, 
   Leadtools.Imageprocessing.Specialeffects.PlaneCommandFlags flags 
)

Public Function New( _ 
   ByVal centerPoint As Leadtools.LeadPoint, _ 
   ByVal zValue As Integer, _ 
   ByVal distance As Integer, _ 
   ByVal planeOffset As Integer, _ 
   ByVal repeat As Integer, _ 
   ByVal pyramidAngle As Integer, _ 
   ByVal stretch As Integer, _ 
   ByVal bendFactor As Integer, _ 
   ByVal startBright As Integer, _ 
   ByVal endBright As Integer, _ 
   ByVal brightLength As Integer, _ 
   ByVal brightColor As Leadtools.RasterColor, _ 
   ByVal fillColor As Leadtools.RasterColor, _ 
   ByVal flags As Leadtools.Imageprocessing.Specialeffects.PlaneCommandFlags _ 
)

public PlaneBendCommand(  
   Leadtools.LeadPoint centerPoint, 
   int zValue, 
   int distance, 
   int planeOffset, 
   int repeat, 
   int pyramidAngle, 
   int stretch, 
   int bendFactor, 
   int startBright, 
   int endBright, 
   int brightLength, 
   Leadtools.RasterColor brightColor, 
   Leadtools.RasterColor fillColor, 
   Leadtools.Imageprocessing.Specialeffects.PlaneCommandFlags flags 
)

function PlaneBendCommand(  
   centerPoint , 
   zValue , 
   distance , 
   planeOffset , 
   repeat , 
   pyramidAngle , 
   stretch , 
   bendFactor , 
   startBright , 
   endBright , 
   brightLength , 
   brightColor , 
   fillColor , 
   flags  
)

public: 
PlaneBendCommand(  
   Leadtools.LeadPoint centerPoint, 
   int zValue, 
   int distance, 
   int planeOffset, 
   int repeat, 
   int pyramidAngle, 
   int stretch, 
   int bendFactor, 
   int startBright, 
   int endBright, 
   int brightLength, 
   Leadtools.RasterColor brightColor, 
   Leadtools.RasterColor fillColor, 
   Leadtools.Imageprocessing.Specialeffects.PlaneCommandFlags flags 
)

Parameters

centerPoint
Contains the point at which the camera or viewer is looking. This is also the point toward which the images will be bent. It may be outside the image borders.

zValue
Viewing screen offset on the Z-axis, in pixels.

distance
Camera distance from the viewing screen, in pixels.

planeOffset
Distance between the parallel planes. This property only accepts positive values.

repeat
Number of times the image repeats along the Z-axis. If Repeat equals -1 the image will be infinitely repeated. Its range starts from -1.

pyramidAngle
The view angle, off the Z-axis. This value is given in hundredths of a degree (+/-). This can be a number from 0 to 36,000.

stretch
Value that indicates whether to expand or compress the image, and by how much. If Stretch < 100 image will be expanded. If stretch > 100 the image will be compressed. Use 100 to maintain the image's dimensions. The value of this parameter is internally divided by 100. This parameter only accepts positive values.

bendFactor
Determines the plane's bending value. The range starts at 100 and increases indefinitely. If bendFactor equals 100 the planes will not be bent.If bendFactor > 100 planes will be bent. The value of this parameter is internally divided by 100. This parameter only accepts positive values.

startBright
Value that indicates the brightness of an external light source on the first image displayed. Possible values range from 0 to 100. A value of 0 indicates no external light displayed on the image. A value of 100 indicates an external light source with full brightness is displayed on the image.

endBright
Value that indicates the brightness of an external light source on the last image displayed. Possible values range from 0 to 100. A value of 0 indicates no external light displayed on the image. A value of 100 indicates an external light source with full brightness is displayed on the image.

brightLength
Value that indicates how much the brightness changes as you move along the Z axis. This parameter is internally multiplied by 50.

brightColor
Specifies the color of an external light source that shines on the displayed images.

fillColor
Specifies the background color.

flags
Flags that indicate the background color and the planes to be shown. You can use a bit wise OR ( ¦ ) to specify one flag from each group.

Example

Run the PlaneBendCommand on an image.

WinRT C#

Imports Leadtools 
Imports Leadtools.Codecs 
Imports Leadtools.ImageProcessing.SpecialEffects 
 
<TestMethod()> _ 
Public Sub PlaneBendConstructorExample() 
   Dim codecs As New RasterCodecs() 
   codecs.ThrowExceptionsOnInvalidImages = True 
   Dim leadImage As RasterImage = codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "sample5.cmp")) 
 
   ' Prepare the command 
   Dim command As PlaneBendCommand = New PlaneBendCommand(New LeadPoint(CType((leadImage.Width / 2), Integer), CType((leadImage.Height / 2), Integer)), 0, leadImage.Height, CType((leadImage.Width / 2), Integer), -1, 0, 100, 400, 0, 100, _ 
         20000, New RasterColor(255, 255, 255), New RasterColor(0, 0, 0), PlaneCommandFlags.Down Or PlaneCommandFlags.Up Or PlaneCommandFlags.Color) 
   command.Run(leadImage) 
   codecs.Save(leadImage, Path.Combine(LEAD_VARS.ImagesDir, "Result.jpg"), RasterImageFormat.Jpeg, 24) 
 
End Sub 
 
Public NotInheritable Class LEAD_VARS 
Public Const ImagesDir As String = "C:\Users\Public\Documents\LEADTOOLS Images" 
End Class

using Leadtools; 
using Leadtools.Codecs; 
using Leadtools.ImageProcessing.SpecialEffects; 
 
public void PlaneBendConstructorExample() 
{ 
   // Load an image 
   RasterCodecs codecs = new RasterCodecs(); 
   codecs.ThrowExceptionsOnInvalidImages = true; 
   RasterImage image = codecs.Load(Path.Combine(LEAD_VARS.ImagesDir, "sample5.cmp")); 
 
   // Prepare the command 
   PlaneBendCommand command = new PlaneBendCommand(new LeadPoint(image.Width / 2, image.Height / 2), 0, image.Height, image.Width / 2, -1, 0, 100, 400, 0, 100, 20000, new RasterColor(255, 255, 255), new RasterColor(0, 0, 0), 
         PlaneCommandFlags.Down |   PlaneCommandFlags.Up |   PlaneCommandFlags.Color); 
   command.Run(image); 
   codecs.Save(image, Path.Combine(LEAD_VARS.ImagesDir, "Result.jpg"), RasterImageFormat.Jpeg, 24); 
 
} 
 
static class LEAD_VARS 
{ 
public const string ImagesDir = @"C:\Users\Public\Documents\LEADTOOLS Images"; 
}

using Leadtools; 
using Leadtools.Codecs; 
using Leadtools.ImageProcessing.SpecialEffects; 
 
public async Task PlaneBendConstructorExample() 
{ 
   // Load an image 
   RasterCodecs codecs = new RasterCodecs(); 
   codecs.ThrowExceptionsOnInvalidImages = true; 
   string srcFileName = @"Assets\Image1.cmp"; 
   StorageFile loadFile = await Tools.AppInstallFolder.GetFileAsync(srcFileName); 
   RasterImage image = await codecs.LoadAsync(LeadStreamFactory.Create(loadFile)); 
 
   // Prepare the command 
   PlaneBendCommand command = new PlaneBendCommand(LeadPointHelper.Create(image.Width / 2, image.Height / 2), 0, image.Height, image.Width / 2, -1, 0, 100, 400, 0, 100, 20000, RasterColorHelper.Create(255, 255, 255), 
         RasterColorHelper.Create(0, 0, 0), PlaneCommandFlags.Down |   PlaneCommandFlags.Up |   PlaneCommandFlags.Color); 
   command.Run(image); 
 
   string destFileName = @"result.bmp"; 
   StorageFile saveFile = await Tools.AppLocalFolder.CreateFileAsync(destFileName); 
   await codecs.SaveAsync(image, LeadStreamFactory.Create(saveFile), RasterImageFormat.Bmp, 24); 
}

Requirements

Target Platforms

See Also

Reference

PlaneBendCommand Class

PlaneBendCommand Members

Overload List

Leadtools.ImageProcessing.SpecialEffects Assembly

Introduction

Getting Started

Namespaces

Leadtools.ImageProcessing.SpecialEffects Namespace