In This Topic ▼

L_FTDisplayBitmap

#include "l_bitmap.h"

L_LTIMGCOR_API L_INT L_FTDisplayBitmap(pBitmap, pFTArray, uFlags)

This function is used to display the results of a Fast Fourier Transform or a Discrete Fourier analysis as a bitmap.

Parameters

pBITMAPHANDLE pBitmap

Pointer to the bitmap handle that references the bitmap.

pFTARRAY pFTArray

Pointer to a FTARRAY structure. The acxData member of the FTARRAY structure is a two-dimensional array holding the frequency components. Its dimensions must equal the bitmap dimensions.

L_UINT uFlags

Flags that indicate the data to be shown and the plotting scale. You can use a bit-wise OR (|) to specify one flag from each group.

The following flags represent the data to be shown:

Value	Meaning
DSP_FT_MAG	[0x0001] Plot harmonics magnitude data.
DSP_FT_PHS	[0x0002] Plot harmonics phase data.

The following flags represent the plotting scale. These are ignored when DSP_FT_PHS is set:

Value	Meaning
DSP_FT_NORM	[0x0010] Plot harmonics magnitudes using the normal linear scale.
DSP_FT_LOG	[0x0020] Plot harmonics magnitudes using logarithmic scale.

Returns

Value	Meaning
SUCCESS	The function was successful.
< 1	An error occurred. Refer to Return Codes.

Comments

This function does not support signed data images. It returns the error code ERROR_SIGNED_DATA_NOT_SUPPORTED if a signed data image is passed to this function.

This function converts the acxData member of the FTARRAY structure computed by L_FFTBitmap or L_DFTBitmap functions into a bitmap. The resulting bitmap may be displayed such that it shows either the frequency harmonics amplitude data or phase data. The (0,0) frequency located in bitmap center, positive X harmonics in the right half and positive Y harmonics located in the lower half of the bitmap.

This function does not work on regions . If a bitmap has a region the function ignores it and processes the entire bitmap.

Bitmap should be allocated prior to calling this function. The size of the bitmap must be the same size as the bitmap that was used to generate acxData or it must have the same width and height of the FTARRAY structure if the transform data was allocated with a padding flag for use with the L_FFTBitmap function.

To update a status bar or detect a user interrupt during execution of this function, refer to L_SetStatusCallback.

This function does not support 12 and 16-bit grayscale and 48 and 64-bit color images. If the image is 12 and 16-bit grayscale and 48 and 64-bit color, the function will not return an error.

This function does not support 32-bit grayscale images. It returns the error code ERROR_GRAY32_UNSUPPORTED if a 32-bit grayscale image is passed to this function.

Required DLLs and Libraries

LTIMGCOR
For a listing of the exact DLLs and Libraries needed, based on the toolkit version, refer to Files To Be Included With Your Application.

Platforms

Win32, x64, Linux.

Functions

Topics

Example

This example loads a bitmap, applies the Discrete Fourier Transform function to it, and displays the data

L_INT FTDisplayBitmapExample(L_VOID) 
{ 
   L_INT nRet; 
   RECT    rcRange; 
   BITMAPHANDLE LeadBitmap, DisplayBitmap; /* Bitmap handle to hold the loaded image. */ 
   pFTARRAY  pFTArray; 
 
   /* Load the bitmap, keeping the bits per pixel of the file */ 
   nRet = L_LoadBitmap(MAKE_IMAGE_PATH(TEXT("ImageProcessingDemo\\FourierTransform.jpg")), &LeadBitmap, sizeof(BITMAPHANDLE), 0, ORDER_BGR, NULL, NULL); 
   if(nRet !=SUCCESS) 
      return nRet; 
   nRet = L_CopyBitmap(&DisplayBitmap, &LeadBitmap, sizeof(BITMAPHANDLE)); 
   if(nRet !=SUCCESS) 
      return nRet; 
 
   /*Allocates buffer*/ 
   nRet = L_AllocFTArray(&LeadBitmap, &pFTArray, sizeof(FTARRAY), 0); 
   if(nRet !=SUCCESS) 
      return nRet; 
 
   rcRange.left  = 0; 
   rcRange.right = LeadBitmap.Width / 4; 
   rcRange.top = 0; 
   rcRange.bottom = LeadBitmap.Height / 2; 
 
   /* apply DFT*/ 
   nRet = L_DFTBitmap(&LeadBitmap, pFTArray, &rcRange, DFT_DFT | DFT_GRAY | DFT_RANGE| DFT_INSIDE_X| DFT_OUTSIDE_Y); 
   if(nRet !=SUCCESS) 
      return nRet; 
 
   /*plot frequency magnitude*/ 
   nRet = L_FTDisplayBitmap(&DisplayBitmap, pFTArray, DSP_FT_MAG | DSP_FT_LOG); 
   if(nRet !=SUCCESS) 
      return nRet; 
 
   /*Frees buffer*/ 
   nRet = L_FreeFTArray(pFTArray, 0); 
   if(nRet !=SUCCESS) 
      return nRet; 
   //free Bitmaps 
   nRet = L_SaveBitmap(MAKE_IMAGE_PATH(TEXT("Result.BMP")), &DisplayBitmap, FILE_BMP, 24, 0, NULL); 
   if(nRet !=SUCCESS) 
      return nRet; 
   //free bitmap  
   if(DisplayBitmap.Flags.Allocated)   
      L_FreeBitmap(&DisplayBitmap);    
   if(LeadBitmap.Flags.Allocated)    
      L_FreeBitmap(&LeadBitmap);  
   return SUCCESS; 
}

Download our FREE evaluation

Help Version 20.0.2020.4.3

LEADTOOLS Raster Imaging C API Help

Introduction

Version History

Getting Started

Files To Be Included With Your Application

Document Writers – Files To Be Included With Your Application

LEADTOOLS Raster Imaging Features