In This Topic ▼

LBitmap::RemapHue

#include "ltwrappr.h"

virtual L_INT LBitmap::RemapHue(pMask, pHTable, pSTable, pVTable, uLUTLen, uFlags = 0)

L_UINT * pMask;	table of 256 bytes identifying valid values in hue table
L_UINT * pHTable;	table of 256 bytes representing the hue lookup table
L_UINT * pSTable;	table of 256 bytes representing the saturation lookup table
L_UINT * pVTable;	table of 256 bytes representing the value lookup table
L_UINT uLUTLen;	length of the lookup table
L_UINT32 uFlags;	flags

Uses a lookup table to change a bitmap's hue values. The saturation and value tables change S and V values only if a particular hue value is marked as non-zero in the pMask table. It is used for all resolutions, including 48 and 64-bit images. Support for 48 and 64-bit images is available only in the Document/Medical toolkits.

Parameter	Description
pMask	Lookup table that identifies which values in the pHTable, pSTable and pVTable are valid. If pMask[i] is non-zero, then pHTable, pSTable and pVTable are to be used. If pMask[i] is 0 then pHTable, pSTable and pVTable are ignored. If pMask is NULL, all entries in the pHTable, pSTable and pVTable are used.
pHTable	Hue look up table. If the pMask table value for a particular pixel hue is non-zero, then the hue is changed to the corresponding entry in pHTable. For example, if a pixel value has a hue of 85 and pMask[85] is non-zero, the hue is changed to pHTable[85]. If pHTable is NULL, the hue of each pixel is unchanged.
pSTable	Saturation look up table. If the pMask table value for a particular pixel hue is non-zero, then the saturation is changed to the corresponding entry in pSTable. For example, if a pixel value has a hue of 85 and pMask[85] is non-zero, the saturation is changed to pSTable[85]. If pHTable is NULL, the saturation is changed to pSTable[85]. If pSTable is NULL, the saturation of each pixel is unchanged.
pVTable	Value look up table. If the pMask table value for a particular pixel hue is non-zero, then the value is changed to the corresponding entry in pVTable. For example, if a pixel value has a hue of 85 and pMask[85] is non-zero, the value is changed to pVTable[85]. If pHTable is NULL, the value is changed to pVTable[85]. If pVTable is NULL, the value of each pixel is unchanged.
uLUTLen	Length of the lookup table. Possible values are:
	Value	Meaning
	65536	16-bit image
	4096	12-bit image
	256	8-bit image
uFlags	Reserved for future use. Must be 0.

Returns

SUCCESS	The function was successful.
< 1	An error occurred. Refer to Return Codes.

Comments

This function can be used to change a range of colors to another range of colors. For example, it could be used to change all red pixels to any color, where a red pixel can have any brightness (V) and any amount of white (saturation). A red pixel in this case would be

RGB(x,y,y) where

0<=x<(uLUTLen 1) and

0<=y<x

or in the HSV color space

HSV(0,x,x) where

0<=x<=(uLUTLen 1)

The pMask lookup table identifies which values in the pHTable are valid. If a pMask value is 0, then the corresponding value in the pHTable is ignored. If a pMask value is non-zero, then the corresponding value in the pHTable is used. For example, if a pixel has a hue value of 240 and pMask[240] is nonzero, then the hue value of 240 is replaced with pHTable[240]. Traditionally, hue ranges from 0 to 359. For the lookup table, the range of 0 to 359 is remapped to a range of 0.. uLUTLen 1. For example, if uLUTLen = 256

Color	Hue(0..359)	Hue(0..255)
Red	0	0
Green	120	85
Blue	240	170

To update a status bar or detect a user interrupt during execution of this function, refer to LBase::EnableStatusCallback.

This function supports 48 and 64-bit color images. Support for 48 and 64-bit color images is available only in the Document/Medical toolkits.

This function does not support signed data images. It returns the error code ERROR_SIGNED_DATA_NOT_SUPPORTED if a signed data image is passed to this function.

This function does not support 32-bit grayscale images. It returns the error code ERROR_GRAY32_UNSUPPORTED if a 32-bit grayscale image is passed to this function.

Required DLLs and Libraries

LTDIS
LTFIL
LTIMGCLR

For a listing of the exact DLLs and Libraries needed, based on the toolkit version, refer to Files To Be Included With Your Application.

Platforms

Win32, x64.

Example

// The example uses the following macros:  
#define INCREMENT(x, uLUTLen) ((x+1)% uLUTLen)  
#define DECREMENT(x, uLUTLen) ((x+ (uLUTLen - 1))% uLUTLen)  
#define ADD(x,y, uLUTLen)     ((x+y)% uLUTLen)  
 
 
L_INT LBitmap__RemapHueExample(LBitmap * pBitmap, COLORREF crNewColor)  
{ 
   UNREFERENCED_PARAMETER(crNewColor); 
 
   L_UINT   * uMaskTable;  
   L_UINT   * uHueTable;  
   L_UINT uHueGreen, uHueChange;  
   L_INT   iHueChange;  
   L_INT   i, iCount, nRet, uLUTLen;  
    
   if(pBitmap->GetBitsPerPixel() >= 48)  
      uLUTLen = 0x10000;  
   else if(pBitmap->IsGrayScale()) 
      uLUTLen = 256;  
   else if((pBitmap->GetHandle())->pLUT && (pBitmap->GetHandle())->Flags.UseLUT)  
      uLUTLen = 256;  
   else 
      uLUTLen = (1 << pBitmap->GetBitsPerPixel ()); 
 
   //Allocate tables 
   uMaskTable = (L_UINT *)malloc (uLUTLen * sizeof(L_UINT));  
   uHueTable  = (L_UINT *)malloc (uLUTLen * sizeof(L_UINT));  
 
   //Initialize tables 
   for (i=0; i<uLUTLen; i++) 
   { 
      uMaskTable[i] = 0;  
      uHueTable[i] = i;  
   } 
 
 
   //Get the hue for green 
   uHueGreen = RGB(0,255,0);  
 
   //Obtain new hue 
   iHueChange = (L_INT)RGB(0,255,0) - (L_INT)uHueGreen;  
   uHueChange = (iHueChange>0) ? (L_UINT)iHueChange : (L_UINT)(iHueChange + (uLUTLen - 1));  
   uHueGreen   *= (uLUTLen - 1)/255;  
   uHueChange *= (uLUTLen - 1)/255;  
 
   //Set values in uHueTable, uMaskTable  
   uHueTable[uHueGreen] = (uHueTable[uHueGreen] + uHueChange);  
   uMaskTable[uHueGreen] = 1;  
    
   //set the hues near green (+/- 15)  
   iCount = (15 * (uLUTLen - 1))/255;  
   for (i=INCREMENT(uHueGreen,uLUTLen); iCount > 0; i = INCREMENT(i, uLUTLen), iCount--) 
   { 
      uHueTable[i] = ADD(uHueTable[i], uHueChange, uLUTLen);  
      uMaskTable[i] = 1;  
   } 
  iCount = (15 * (uLUTLen - 1))/255;  
   for (i=DECREMENT(uHueGreen, uLUTLen); iCount > 0; i =DECREMENT(i, uLUTLen), iCount--) 
   { 
      uHueTable[i] = ADD(uHueTable[i],uHueChange, uLUTLen);  
      uMaskTable[i] = 1;  
   } 
    
   nRet = pBitmap->RemapHue(uMaskTable, uHueTable, NULL, NULL, uLUTLen);  
    
   if(uMaskTable)  
      free(uMaskTable);  
   if(uHueTable)  
      free (uHueTable);  
 
   return nRet;  
}

Download our FREE evaluation

Help Version 20.0.2020.4.5

LEADTOOLS Raster Imaging C++ Class Library Help

Introduction

Version History

Getting Started

LEADTOOLS Raster Imaging Features

Redistributables/Files To Be Included With Your Application

Quick Reference

Tutorials

Classes and Member Functions

Summary of Features

Functions:	LBitmap::ChangeIntensity, LBitmap::GammaCorrect, LBitmap::HistoContrast, LBitmap::StretchIntensity, LBitmap::RemapIntensity, LBitmap::Invert, LBitmap::ChangeContrast, LBitmap::ChangeSaturation, LBitmap::HistoEqualize, LBitmap::GetHistogram, LBitmap::WindowLevel, LBitmap::WindowLevelExt, LBitmapBase::Fill, LBitmapBase::GetPixelColor, LBitmapBase::PutPixelColor, LBitmapRgn::SetRgnColorHSVRange, LBitmapRgn::SetRgnColorRGBRange, Class Members
Topics:	Raster Image Functions: Modifying Intensity Values
	Correcting Colors
	Using Color Values in LEADTOOLS
	Raster Image Functions: Changing Brightness and Contrast