LBitmap::SRADAnisotropicDiffusion

#include "ltwrappr.h"

virtual L_INT LBitmap::SRADAnisotropicDiffusion(nIter, nLambda, pRect)

L_INT nIter;	number of iterations the filter will perform
L_INT nLambda;	the smoothing time step value
LPRECT pRect;	the homogeneous region of uniform speckles

Applies a 2-Dimensional Anisotropic Diffusion filter on an image in order to reduce noise and speckling, while preserving the edges.

Parameter	Description
nIter	Number of iterations the filter will perform. The default value is 10.
nLambda	The smoothing time step value. Valid values range from 0 to 100. A value of 0 means nothing will be done to the image. By default, nLambda is set at 50.
pRect	The homogeneous region of uniform speckles.

Returns

SUCCESS	The function was successful.
< 1	An error occurred. Refer to Return Codes.

Comments

The Speckle Reducing Anisotropic Diffusion (SRAD) function is similar to the LBitmap::AverageFilter function, but is used to reduce noise and speckling in images while preserving the edges instead of blurring.

LEADTOOLS offers three functions that implement anisotropic diffusion:

LBitmap::AnisotropicDiffusion: LBitmap::AnisotropicDiffusion is a slower but more accurate version of LBitmap::SRADAnisotropDiffusion.
LBitmap::SRADAnisotropDiffusion: In comparison with conventional anisotropic diffusion, the LBitmap::SRADAnisotropDiffusion uniform areas exhibit more smoothing and edges and features are preserved better.
LBitmap::TADAnisotropicDiffusion: LBitmap::TADAnisotropicDiffusion employs an edge-seeking diffusion coefficient.

All three reduce noise and preserve edges and perform better than the LBitmap::MedianFilter or LBitmap__GaussianFilter functions. With the anisotropic functions, areas within regions are smoothed, but the edges are not affected.

The number of iterations controls the number of times the filter will be applied to an image. The lower the number of iterations, the faster the filter will perform. Higher iterations typically mean clearer results.

This function can only process the entire image. It does not support regions.

This function supports 8- and 16-bit grayscale images and 24- and 32-bit colored images.

This function supports signed/unsigned images.

Required DLLs and Libraries

LTDIS
LTFIL
LTIMGCOR

For a listing of the exact DLLs and Libraries needed, based on the toolkit version, refer to Files To Be Included With Your Application.

Platforms

Win32, x64.

Example

#define MAKE_IMAGE_PATH(pFileName) TEXT("C:\\Users\\Public\\Documents\\LEADTOOLS Images\\")pFileName 
#if defined (LEADTOOLS_V19_OR_LATER) 
L_INT LBitmap__SRADAnisotropicDiffusionExample(L_VOID) 
{ 
   L_INT nRet; 
   LBitmap LeadBitmap; 
   nRet = LeadBitmap.Load(MAKE_IMAGE_PATH(TEXT("IMAGE3.dcm")), 0,ORDER_BGR); 
   if(nRet !=SUCCESS) 
      return nRet ; 
   /* Apply SRADAnisotropicDiffusion filter */ 
   RECT rc ; 
   rc.left   = 150; 
   rc.right  = 180; 
   rc.top    = 300; 
   rc.bottom = 330; 
   nRet = LeadBitmap.SRADAnisotropicDiffusion(10, 50, &rc); 
   return nRet ; 
} 
#endif // LEADTOOLS_V19_OR_LATER

Help Version 19.0.2017.10.27

LEADTOOLS Raster Imaging C++ Class Library Help

Introduction

Version History

Getting Started

LEADTOOLS Raster Imaging Features

Redistributables/Files To Be Included With Your Application

Quick Reference

Tutorials

Classes and Member Functions

Call Back Functions

Summary of Features