LBitmapBase::Initialize

#include "ltwrappr.h"

virtual L_INT LBitmapBase::Initialize(nWidth=0, nHeight=0, nBitsPerPixel=0)

L_INT nWidth;	width of the image in pixels
L_INT nHeight;	height of the image in pixels
L_INT nBitsPerPixel;	number of bits per pixel in the image

Initializes the fields in a class objects bitmap handle.

Parameter	Description
nWidth	Width of the image in pixels.
nHeight	Height of the image in pixels.
nBitsPerPixel	Number of bits per pixel in the image. Possible values are:
	Value	Meaning
	1	For a 1-bit image.
	2	For a 2-bit image.
	3	For a 3-bit image.
	4	For a 4-bit image.
	5	For a 5-bit image.
	6	For a 6-bit image.
	7	For a 7-bit image.
	8	For an 8-bit image.
	2	For a 12-bit image.
	6	For a 16-bit image.
	4	For a 24-bit image.
	2	For a 32-bit image.
	8	For a 48-bit image.
	4	For a 64-bit image.

Returns

SUCCESS	The function was successful.
< 1	An error occurred. Refer to Return Codes.

Comments

Support for 12 and 16-bit grayscale images is only available in the Document/Medical toolkits.

This is a low-level function that is necessary only if you need to initialize the bitmap handle and allocate memory in separate steps when creating a bitmap from scratch. LBitmapBase::Create is usually a better choice.

This function must be called before using LBitmapBase::Allocate. This function only initializes the fields in the bitmap handle; it does not allocate any memory. If all zeroes are passed as the nWidth, nHeight, and nBitsPerPixel into this function, then all fields in the bitmap handle will be set to 0. Otherwise, all fields will be set to zero except the fields listed below.

When this function is called, the following fields will be set:

Field	Value
Order	ORDER_RGB if you specify 8 bits per pixel or less; ORDER_GRAY for 12 or 16-bit grayscale; ORDER_BGR otherwise. ORDER_GRAY is valid only for 12 and 16-bit grayscale images and is only available in the Document/Medical toolkits.
DitherMethod	Set by the LBitmapBase::SetDefaultDithering function
ViewPerspective	BOTTOM_LEFT [2]
Width	As passed into the function
Height	As passed into the function
BytesPerLine	Calculated using the specified width and bits per pixel, rounded on a 4-byte boundary
XResolution	Set in the LOADFILEOPTION.
YResolution	Set in the LOADFILEOPTION.