LBitmapBase::SizeInterpolate

#include "ltwrappr.h"

L_INT LBitmapBase::SizeInterpolate(nWidth, nHeight, uFlag = SIZE_NORMAL)

L_INT nWidth;	new width in pixels
L_INT nHeight;	new height in pixels
L_INT uFlag;	quality control flags

Resizes a bitmap to a new width and height.

Parameter	Description
nWidth	Value that represents the new width, in pixels.
nHeight	Value that represents the new height, in pixels.
uFlag	Flag that determines the resizing behavior. Possible values are:
	Value	Meaning
	SIZE_NORMAL	[0x0000] Resize normally. This is the fastest, but can cause aliasing.
	SIZE_RESAMPLE	[0x0002] Use Linear interpolation and averaging to produce a higher-quality image.
	SIZE_BICUBIC	[0x0004] Use Bicubic interpolation and averaging to produce a high-quality image. This is slower than SIZE_BILINEAR.
	SIZE_TRIANGLE	[0x0005] Use Triangular-peaked weighting average to produce a high-quality image.
	SIZE_HERMITE	[0x0006] Use Hermite interpolation to produce a good quality image better than Bresenham interpolation but not as good as Bilinear interpolation. (using a cubic spline as is done when using Hermite interpolation is slower than when using Bilinear interpolation).
	SIZE_BELL	[0x0007] Use bell interpolation to produce a high-quality image. This filter blurs the image at the same time it resizes. If you want performance similar to bicubic filtering but your source image is noisy, use this one.
	SIZE_QUADRATIC_B_SPLINE	[0x0008] Use Quadratic B-Spline interpolation to produce a smooth quality image but one that is not as good as one produced using Cubic B-Spline interpolation. This is faster than SIZE_BICUBIC but slower than SIZE_CUBIC_B_SPLINE.
	SIZE_CUBIC_B_SPLINE	[0x0009] Use Cubic B-Spline interpolation to produce a very smooth quality image (very blurry). This is one step further than the 'Bell Filter'. This type of interpolation is a bit slower and generates an image with more blur but it has less noise. This method is faster than SIZE_BICUBIC.
	SIZE_BOXFILTER	[0x00A] Use Box filter for results equivalent to Nearest Neighbor on Upsampling, and average pixels on Downsampling. This gives best result for images with single pixel lines.
	SIZE_LANCZOS	[0x000B] Use Lanczos interpolation using Sinc (sinx/x) to produce a high-quality image. Provides the best quality but it is rather slow.
	SIZE_MICHELL	[0x000C] Use Michel interpolation to produce a smooth quality image although not as smooth as one produced using Quadratic B-Spline interpolation. It is slower than SIZE_BICUBIC.
	SIZE_COSINE	[0x000D] Use a Cosine function in the interpolation to produce a good quality image.
	SIZE_CATROM	[0x000E] Use CatmullRom interpolation to produce a high-quality image. It is slower than SIZE_BICUBIC but faster than SIZE_LANCZOS.
	SIZE_QUDRATIC	[0x000F] Use QUADRATIC interpolation to produce a high-quality image although it is not as good quality as one produced using Bilinear interpolation. It is slower than SIZE_BICUBIC.
	SIZE_CUBIC_CONVOLUTION	[0x0010] Use Cubic Convolution interpolation to produce a high-quality image with enhanced image edges. It is slower than SIZE_BICUBIC.
	SIZE_BILINEAR	[0x0011] Use Linear interpolation and averaging to produce a high-quality image. It is fast but slower than SIZE_NORMAL and SIZE_BRESENHAM
	SIZE_BRESENHAM	[0x0012] Use Bresenham interpolation and averaging to produce a good quality image (better than SIZE_NORMAL). This is slower than SIZE_NORMAL but faster than SIZE_BILINEAR.

Returns

SUCCESS	The function was successful.
< 1	An error occurred. Refer to Return Codes.

Comments

This function supports 12 and 16-bit grayscale and 48 and 64-bit color images. Support for 12 and 16-bit grayscale and 48 and 64-bit color images is available only in the Document/Medical toolkits.

To see a visual comparison among these methods, showing speed and result of 500% enlargement, click here.

Required DLLs and Libraries

LTIMGCOR
TIMGUTL
LTWVC

For a listing of the exact DLLs and Libraries needed, based on the toolkit version, refer to Files To Be Included With Your Application.

Platforms

Win32, x64.

Example

#define MAKE_IMAGE_PATH(pFileName) TEXT("C:\\Users\\Public\\Documents\\LEADTOOLS Images\\")pFileName 
L_INT LBitmapBase__SizeInterpolateExample() 
{ 
   L_INT nRet; 
   LBitmapBase MyBitmap; 
   nRet =MyBitmap.Load(MAKE_IMAGE_PATH(TEXT("sample5.cmp"))); 
   if(nRet !=SUCCESS) 
      return nRet; 
   nRet =MyBitmap.SizeInterpolate(100,100); 
   if(nRet !=SUCCESS) 
      return nRet;/*change the size of the bitmap object to 100x100  */ 
   nRet =MyBitmap.Free(); 
   if(nRet !=SUCCESS) 
      return nRet; 
   return SUCCESS; 
}

Help Version 19.0.2017.10.27

Products | Support | Contact Us | Copyright Notices
© 1991-2017 LEAD Technologies, Inc. All Rights Reserved.

LEADTOOLS Raster Imaging C++ Class Library Help

Introduction

Version History

Getting Started

LEADTOOLS Raster Imaging Features

Redistributables/Files To Be Included With Your Application

Quick Reference

Tutorials

Classes and Member Functions

Call Back Functions

Summary of Features

Functions:	LBitmapBase::Size, LBuffer::StartResize, LBuffer::Resize, LBuffer::StopResize, Class Members.
Topics:	Raster Image Functions: Doing Geometric Transformations
	Resizing Considerations