#include "l_bitmap.h"
L_LTIMGCLR_API L_INT L_ColorThresholdBitmap (pBitmap, uColorSpace, pCompData, uFlags)
pBITMAPHANDLE pBitmap; |
pointer to the bitmap handle |
L_UINT uColorSpace; |
color space |
pCOMPDATA pCompData; |
pointer to an array of structures |
L_UINT32 uFlags; |
flags |
Using any one of eight color spaces, resets those bitmaps pixel component values that fall inside or outside of a specified range.
Parameter | Description | |
pBitmap | Pointer to the bitmap handle that references the bitmap on which to apply the effect. | |
uColorSpace | Color space which the threshold is based on. Possible values are | |
Value | Meaning | |
CLTH_RGB_SPACE | [0x00000000] RGB color space | |
CLTH_HSV_SPACE | [0x00000001] HSV color space | |
CLTH_HLS_SPACE | [0x00000002] HLS color space | |
CLTH_XYZ_SPACE | [0x00000003] XYZ color space | |
CLTH_YCrCb_SPACE | [0x00000004] YCrCb color space | |
CLTH_YUV_SPACE | [0x00000005] YUV color space | |
CLTH_LAB_SPACE | [0x00000006] LAB color space | |
CLTH_CMY_SPACE | [0x00000007] CMY color space | |
pCompData | Pointer to an array of 3 COMPDATA structures that contains the parameters used to compare and modify each component. | |
uFlags | Reserved for future use. Must be 0. |
SUCCESS |
The function was successful. |
< 1 |
An error occurred. Refer to Return Codes. |
This function does not support signed data images. It returns the error code ERROR_SIGNED_DATA_NOT_SUPPORTED if a signed data image is passed to this function.
This function is similar to the L_ConvertColorSpace function but provides greater flexibility by allowing the specification of a range and different options for handling those values that fall outside of the range. Please note that every color space component may have a different range.
Color Component |
Range for 8-bit components |
Range for 16-bit components |
RGB |
|
|
R |
0 255 |
0 - 65535 |
G |
0 255 |
0 - 65535 |
B |
0 255 |
0 - 65535 |
HSV |
|
|
H |
0 - 360 |
0 - 36000 |
S |
0 - 100 |
0 - 10000 |
V |
0 - 255 |
0 - 65535 |
HLS |
|
|
H |
0 - 360 |
0 - 36000 |
L |
0 - 255 |
0 - 65535 |
S |
0 - 100 |
0 - 10000 |
XYZ |
|
|
X |
0 - 255 |
0 - 65535 |
Y |
0 - 255 |
0 - 65535 |
Z |
0 - 255 |
0 - 65535 |
YCrCb |
|
|
Y |
0 - 255 |
0 - 65535 |
Cr |
-128 - 127 |
-32768 - 32767 |
Cb |
-128 - 127 |
-32768 - 32767 |
YUV |
|
|
Y |
0 - 255 |
0 - 65535 |
U |
-112 - 111 |
-28567 - 28566 |
V |
-138 - 137 |
-35337 - 35336 |
LAB |
|
|
L |
0 - 100 |
0 - 10000 |
A |
-128 - 127 |
-32768 - 32767 |
B |
-128 - 127 |
-32768 - 32767 |
CMY |
|
|
C |
0 - 255 |
0 - 65535 |
M |
0 - 255 |
0 - 65535 |
Y |
0 - 255 |
0 - 65535 |
This function works as follows:
1. | The bitmap is converted to the required color space. | |
2. | For every pixel, the following operations are performed: Each component is compared with the nMinRange and nMaxRange ranges of the appropriate COMPDATA structure. | |
a. | If it is inside the range, the component is considered to have "passed" the test. | |
b. | If it is outside the range, the component has been rejected". The CLTH_TYP_BANDREJECT flag inverts this by making "rejected" components "passed" and viceversa. | |
3. | If CLTH_MOD_CHANNEL is set, the components are modified independently. If CLTH_MOD_ALL has been passed, the pixel is rejected by the test if any component is rejected. If the pixel/component is rejected, then: | |
a. | If CLTH_VALUE_MIN is passed, the rejected pixel/component is set to 0. | |
b. | If CLTH_VALUE_MAX is passed, the rejected pixel/component is set to 255. | |
c. | If CLTH_VALUE_CLAMP is passed, components less that nMin go to 0 and components greater than nMax go to 255. This would work only with the CLTH_MOD_CHANNEL and CLTH_TYP_BANDPASS flag. |
This function works for 1, 2, 3, 8,16, 24, 32, 48 and 64-bit color bitmaps and can support regions for 24 and 48-bit bitmaps. If a 24 or 48-bit bitmap has a region the effect will be applied on the region only.
One structure is used for each color component. The order is considered to be the same as in the CLTH_xxx_SPACE name. For example, for CLTH_RGB_SPACE:
pCompData[0] structure is used for the Blue component
pCompData[1] structure is used for the Green component
pCompData[2] structure is used for the Red component
The pCompData[0].uStructSize must be set to sizeof(COMPDATA) before calling this function. For an array of structures, only the first structure in the array needs to have uStructSize member set.
To update a status bar or detect a user interrupt during execution of this function, refer to L_SetStatusCallback.
This function does not support 32-bit grayscale images. It returns the error code ERROR_GRAY32_UNSUPPORTED if a 32-bit grayscale image is passed to this function.
Required DLLs and Libraries
For a listing of the exact DLLs and Libraries needed, based on the toolkit version, refer to Files To Be Included With Your Application. |
Win32, x64, Linux.
#define MAKE_IMAGE_PATH(pFileName) TEXT("C:\\Users\\Public\\Documents\\LEADTOOLS Images\\")pFileName
L_INT ColorThresholdBitmapExample(L_VOID)
{
L_INT nRet;
BITMAPHANDLE LeadBitmap; /* Bitmap handle for the image */
COMPDATA pCompData[3];
L_INT nI;
/* Load a bitmap at its own bits per pixel */
nRet = L_LoadBitmap(MAKE_IMAGE_PATH(TEXT("ImageProcessingDemo\\Image1.jpg")), &LeadBitmap, sizeof(BITMAPHANDLE), 0, ORDER_BGR, NULL, NULL);
if(nRet !=SUCCESS)
return nRet;
pCompData[0].uStructSize = sizeof(COMPDATA);
for (nI = 0; nI < 3; nI++)
{
pCompData[nI].nMinRange = 128;
pCompData[nI].nMaxRange = 255;
pCompData[nI].uFlags = 0;
}
/* Apply color Threshold effect on the image*/
nRet = L_ColorThresholdBitmap(&LeadBitmap, CLTH_RGB_SPACE, pCompData, 0);
if(nRet !=SUCCESS)
return nRet;
nRet = L_SaveBitmap(MAKE_IMAGE_PATH(TEXT("Result.BMP")), &LeadBitmap, FILE_BMP, 24, 0, NULL);
if(nRet !=SUCCESS)
return nRet;
//free bitmap
if(LeadBitmap.Flags.Allocated)
L_FreeBitmap(&LeadBitmap);
return SUCCESS;
}
Raster .NET | C API | C++ Class Library | JavaScript HTML5
Document .NET | C API | C++ Class Library | JavaScript HTML5
Medical .NET | C API | C++ Class Library | JavaScript HTML5
Medical Web Viewer .NET